ESP32-C3-LCD-0.71-B - ESP32-C3 Module with 0.71" IPS Display - Waveshare 29512

ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and capacitive touch panel. Supports Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4 and integrates a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot and USB-C. Variant supplied with a 3.7V battery. Waveshare ESP32-C6-Touch-LCD-1.54

ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and support for Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4. Features a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot, USB-C and 3.7V battery interface; non-touch EN variant. Waveshare ESP32-C6-LCD-1.54-EN

ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and support for Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4. Features a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot, USB-C and 3.7V battery support; non-touch version supplied with a 1000mAh battery. Waveshare ESP32-C6-LCD-1.54

Development board based on the ESP32-C3FH4 with a 1.47-inch IPS LCD featuring 172 × 320px resolution, 2.4GHz Wi-Fi, Bluetooth 5 LE and a QMI8658 6-axis IMU. Standard version supplied with separate unsoldered pin headers and also equipped with a TF card slot, USB-C and 15 broken-out GPIOs. Waveshare ESP32-C3-LCD-1.47

ESP32-S3R8 development board with a 1.85-inch 360 × 360px LCD capacitive touch display and a CNC-machined aluminum alloy enclosure. Features 2.4GHz Wi-Fi, Bluetooth 5 LE, 8MB PSRAM, 16MB Flash, QMI8658 6-axis IMU, dual microphones, audio circuitry with an output for connecting a speaker and a USB-C interface. Waveshare ESP32-S3-Touch-LCD-1.85B-EN

Compact communication platform based on a dual-core ESP32-S3 processor, designed for building LoRa Mesh networks, IoT projects, and embedded systems. The device features a 1.14" LCD display, a 56-key keyboard, and advanced audio capabilities with a microphone, speaker, and 3.5 mm audio output. The design is fully based on the Cardputer-Adv platform and extends its functionality with the Cap LoRa-1262 module, adding LoRa communication and GNSS positioning with support for GPS, BeiDou, Galileo, and GLONASS. A built-in accelerometer, infrared transmitter, microSD card slot, and Grove interfaces allow easy expansion and sensor integration, while the 1750 mAh Li-ion battery provides mobility and extended operating time. M5Stack K152

ESP32-S3-based development platform featuring a 1.75" round AMOLED display, audio subsystem, IMU sensor, WiFi connectivity, and a rechargeable battery for portable IoT devices. M5Stack C152

ESP32-S3-based development platform featuring a 4-inch full-color E Ink Spectra 6 display, audio subsystem, temperature and humidity sensor, microSD card slot, and rechargeable battery for low-power IoT devices and data display applications. M5Stack C151

Portable development device based on the ESP32-S3 microcontroller combines an SX1262 868 MHz LoRa transceiver, a 2.8" IPS color display, a full QWERTY keyboard, and a trackball controller in a compact enclosure. Factory-installed LILYGO Factory Firmware allows immediate use without manually flashing the base firmware. The package includes an 868 MHz LoRa FPC antenna, a power cable, and a 1×6 pin header. The device is designed for LoRa communication terminals, portable messaging devices, IoT projects, and custom applications based on the ESP32-S3 microcontroller. LILYGO TTGO T-Deck 868 MHz Black LILYGO Factory Firmware

A development board based on the ESP32 microcontroller that combines an SX1278 LoRa transceiver, a 0.96" OLED display, and a microSD card slot in a single compact design. Preloaded with Disaster-Radio firmware, it supports Wi-Fi, Bluetooth 4.2, and 433 MHz LoRa communication. The kit includes a 433 MHz LoRa antenna, a JST 2-pin power cable, and pin headers for soldering. The board is designed for autonomous communication devices, mesh network nodes, and IoT applications. LILYGO TTGO T3 LoRa32 V1.6.1 Disaster-Radio 433 MHz

An ESP32-based development board that combines a LoRa communication module, NEO-6M GPS receiver, and a 0.96" OLED display in a single device. Preloaded with Meshtastic firmware, it supports Wi-Fi, Bluetooth 4.2, and 433 MHz LoRa communication. The kit includes a non-soldered 0.96" OLED display, a 433 MHz LoRa antenna, and pin headers for self-assembly. The board is suitable for building autonomous mesh network nodes, GPS trackers, and battery-powered IoT devices using a 18650 Li-Ion cell or a microUSB power supply. LILYGO TTGO T-Beam Meshtastic 433 MHz Non-Soldered OLED

The LILYGO TTGO T-Dongle S3 With LCD [K193] is an ESP32-S3 development board combining the functionality of a powerful microcontroller with the compact form factor of a USB dongle. It features a 0.96-inch ST7735 IPS color display, 16 MB Flash memory, 2.4 GHz Wi-Fi and Bluetooth 5 connectivity. Compatible with Arduino IDE, PlatformIO, and MicroPython, the module provides a convenient platform for developing IoT devices, portable USB tools, information displays, and embedded applications. LILYGO TTGO T-Dongle S3 With LCD [K193]

The LILYGO TTGO T-Embed Black development board is based on the ESP32-S3 microcontroller and integrates a 1.9" IPS color display, a rotary encoder with a push button, dual microphones, a speaker, a microSD card slot, and Wi-Fi and Bluetooth connectivity. The board is designed for HMI panels, IoT devices, controllers, and portable user interfaces requiring local control and wireless communication. LILYGO TTGO T-Embed Black

The LILYGO TTGO VGA32 V1.4 development board is based on the ESP32 microcontroller and enables VGA video output without requiring an external graphics controller. The board features a VGA connector, PS/2 ports for a keyboard and mouse, a microSD card slot, and Wi-Fi and Bluetooth connectivity. With support for the FabGL library, it can be used to create graphical user interfaces, ANSI/VT terminals, games, and applications displayed on VGA monitors. LILYGO TTGO VGA32 V1.4

LILYGO T-Halow V1.0 combines the ESP32-S3 microcontroller with a Wi-Fi HaLow (IEEE 802.11ah) module, an RJ45 Ethernet interface, and a camera connector compatible with OV2640 / OV5640 modules. The board features 16 MB Flash, 8 MB PSRAM, a microSD card slot, an 18650 battery holder. LILYGO T-Halow V1.0 859-894 MHz 875M SAW [H766]

IoT communication module with a RISC-V processor, supporting 2.4 GHz WiFi 802.11 b/g/n and Bluetooth 5 Low Energy. Equipped with 4 MB Flash memory, 15 GPIOs and an integrated PCB antenna. It operates from a 3.0 V to 3.6 V supply and is designed for SMD mounting. Espressif ESP32-C3-MINI-1-H4