

zł73.57 tax excl.
Development kit with ESP32 WiFi and Bluetooth module and 0.96 "OLED display. It has a built-in Li-Pol charger module and a USB-UART converter function. ModOLEDESP32_V2.0_TTGO
Development kit with ESP32 WiFi and Bluetooth module and 0.96 "OLED display. The core of the board is the ESP32 module with a microcontroller clocked at 240 MHz and logic working in the voltage range from 0 to 3.3 V. Programming the board is extremely easy thanks to the support in the form Arduino IDE environment ensuring quick start of projects related to IoT technology.
The built-in lithium polymer battery connector and charger module allow you to connect a Li-Pol battery. The battery is charged via the mounted USB connector. The module also has a USB-UART converter function.
Espressif ESP32 is an integrated circuit that combines Wi-Fi functionality and Bluetooth 4.0 BLE. Integrated 32-bit, dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be powered by 2.2V-3.6V. The system has a housing QFN48 (6x6mm). ESP32 Chip
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. Adafruit 3405
The development board allows you to easily use the capabilities of ESP32 (Wi-Fi + Bluetooth BLE) from Espressif. There is a USB / UART converter on the board, and most of the GPIO line of the ESP-WROOM-32D module has been connected to pins with a pitch of 2.54mm. ESP32-DevKitC V4
Li-Po battery with a rated voltage of 3.7 V and a capacity of 620 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP852040
No product available!
Espressif ESP32-S3 WiFi module board with 32-bit dual-core Xtensa 32-bit LX7 processor. It offers 4 MB Flash memory and 512 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-S3-Zero
ESP32-S2-DevKitC-1U-N8R2 is an evaluation board featuring the ESP32-S2-SOLO-2U module, designed for developing wireless applications using 2.4 GHz Wi-Fi communication. The use of a U.FL connector allows for the integration of an external antenna, making it particularly useful in environments requiring extended range or signal isolation. With a wide range of available interfaces and large memory capacity, the board is ideally suited for IoT projects, building automation, remote control systems, and monitoring applications.
A shield designed to collect data from the MyoWare 2.0 Muscle Sensor and transmit it wirelessly using the ESP32-WROOM module. Equipped with a built-in 40 mAh LiPo battery. SparkFun DEV-23387
No product available!
Board with the WiFi Espressif ESP32-C3 module. It offers 4 MB of Flash memory and 400 KB of SRAM and an RGB diode. It is equipped with a matrix of WS2812B programmable diodes
No product available!
Development kit based on the ESP-WROOM-32 module, equipped with a dual-core 32-bit Tensilica LX6 microcontroller (up to 240 MHz), offers 2.4GHz WiFi and Bluetooth connectivity. Thanks to numerous interfaces (GPIO, SPI, I2C, UART), it is perfect for IoT projects, smart homes and remote control systems.
No product available!
Board with the WiFi Espressif ESP32-S3 module. It offers 8 MB of Flash memory and 512 KB of SRAM and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5426
A compact IoT device that combines an ESP32S3 processor with a Wio-SX1262 LoRa module, enabling communication distances of up to 5 km in the 868–915 MHz band. With support for LoRaWAN, 2.4 GHz Wi-Fi, Bluetooth 5.0, and expansion options for GNSS and sensors, it is a versatile solution for IoT gateways and nodes. Seeed Studio 113110064
A board with a built-in ESP-WROOM-32 module and an 0.96 "OLED display (SSD1306) with a resolution of 128x64. The ESP32 system enables communication of WiFi 2.4 GHz and Bluetooth BLE v4.2 networks. modESP32_OLED
ESP32-S3-LCD-4 is an advanced development board with a 4" display, intended for high-level HMI, automation, and interactive system applications. The non-touch version offers a full set of industrial interfaces (RS485, CAN, I2C), integrated power management, and flexible mounting options. With high computational performance, ample memory resources, and support for ESP-IDF and Arduino IDE environments, it serves as a solid platform for implementing control and communication systems in end devices.
No product available!
ESP32-S3-Touch-AMOLED-2.06 is a complete development platform for designing wearable devices with an AMOLED display, touch control, audio, wireless connectivity, and AI features. Thanks to its compact design and built-in battery, it is suitable as a foundation for smartwatches, data loggers, and IoT devices.
No product available!
Module from the ESP32 series, combining a powerful microcontroller, Wi-Fi and Bluetooth 4.2 BLE. ESP-WROVER-B has a built-in PCB antenna, a large number of GPIO lines and small dimensions. Adafruit 3979
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5477
ESP32-S3-Touch-LCD-2.8B is an advanced development module with a 2.8" color IPS display and touch function, based on the ESP32-S3 microcontroller. Integrated communication interfaces, sensors, and numerous connectors make it a versatile platform for implementing HMI interface projects, IoT devices, and applications requiring user interaction with the screen. Support for ESP-IDF and Arduino IDE facilitates rapid software development and solution testing.
No product available!
ESP32-S3-Touch-LCD-2.8C is an advanced development board with a high-resolution IPS display and touch support. High computing power, rich interface and sensor equipment, as well as support for Arduino and ESP-IDF environments make it a versatile tool for HMI projects, IoT devices, and data visualization systems. Ideal for applications requiring an interactive display with an intuitive touch interface.
No product available!
ESP32-S3-Touch-LCD-3.5 is a modern development platform integrating multimedia, communication, and sensor functions. With a touch display, audio, IMU, and MIPI camera support, it enables the creation of advanced user interfaces and interactive applications with Wi-Fi and Bluetooth connectivity. Ideal for control systems, portable devices, and interactive HMI panels.
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5399
Development kit with ESP32 WiFi and Bluetooth module and 0.96 "OLED display. It has a built-in Li-Pol charger module and a USB-UART converter function. ModOLEDESP32_V2.0_TTGO