.png)
- Out-of-Stock
chipKIT Network Shield
ID: 187747
chipKIT Network Shield
chipKIT Network Shield
The chipKIT Network Shield is an input/output expansion board designed for use with the chipKIT Max32™. It provides the additional circuitry and connectors to allow the advanced communications features of the PIC32MX795F512L on the Max32 to be utilized.
The Network Shield provides a 10/100 Mbps Ethernet PHY to allow connection to an Ethernet network. It provides the connectors and load switch to support use of the USB 2.0 OTG controller to implement USB device, USB host or OTG operation. It also provides two CAN transceivers and connectors to allow connection to two independent CAN networks. Connectors are provided to allow connection to two of the I2C busses supported by the Max32.
In addition to the communications features, the Network Shield also adds a 256Kbit I2C EEPROM for non-volatile data storage and a 32.768Khz oscillator to allow use of the Real Time Clock/Calendar (RTCC) peripheral in the PIC32 microcontroller.
The Network Shield is designed to the same form factor as the Max32 board.
Key Features:
- Usable with the Max32™
- SMSC LAN8720 10/100 Ethernet PHY
- RJ45 connector with integral magnetics
- USB Device and Host Connectors
- Two MCP2551 CAN Transceivers
- Two 12-pin header connectors for CAN
- Two I2C daisy chain connectors
- 256Kbit I2C EEPROM
- 32.768 Khz Oscillator
Manufacturer: Digilent
Code: 410-211
187747
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
24h
Available quantity: 279
Available
Cables for evaluation boards, set of 10 pcs., red colour
zł5.90
24h
Available quantity: 284
Available
Cables for evaluation boards, set of 10 pcs., green colour
zł5.46
24h
Available quantity: 71
Available
Available
Cable with USB plugs type A and mini-USB type B, cable with a length of 1.8 m
zł9.91
24h
Available quantity: 16
Available
Cables for evaluation boards, set of 10 pcs., yellow colour
zł5.90
24h
Available quantity: 57
Available
Cables for evaluation boards, set of 10 pcs., white colour
zł6.06
24h
Available quantity: 24
Available
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
zł6.20
24h
Available quantity: 412
Available
Ethernet patch cord UTP 5E, 2 m long. Red color, with RJ45 connectors. Lanberg Z22990
zł3.00
24h
Available quantity: 10
Available
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0200-BK
zł3.00
24h
Available quantity: 6
Available
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0200-B
zł2.76
24h
Available quantity: 10
Available
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0200-Y
zł3.51
24h
Available quantity: 26
Available
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0300-S
zł3.60
24h
Available quantity: 3
Available
Other products in the same category (16)
USB - CAN converter module. It allows the device to be connected to a computer (USB) or microcontroller (UART) via the CAN bus. USB CAN CONVERTER (UCCB)
Retired
No product available!
Set with HQ camera, HDMI adapter, lens, tripod and Jetvariety adapter. Kit designed for NVIDIA Jetson Nano. ArduCAM B0243
Retired
No product available!
Laboratory power supply with programmable memory and smooth voltage regulation in the range from 0 to 60V and smooth current regulation in the range from 0-5A. KORAD KD6005D
Retired
No product available!
Industrial SoC module integrating Xilinx Zynq 7020 SoC, Gigabit Ethernet transceiver, 1 GB DDR3 SDRAM and 32 MB Flash memory. Trenz Electronic TE0720-03-2IF
Retired
No product available!
A minisumo robot on a tracked chassis with Pololu 100:1 HP motors. Fully assembled robot, additionally requires four AA batteries. Pololu 3127
Retired
No product available!
A module that allows you to connect ArduCAM cameras with a CSI interface to a PC or minicomputers via the USB3.0 interface. It not only supports high-resolution, high-frame rate image sensors, but also a stereoscopic camera and IRCUT control functions. ArduCAM B0111
Retired
No product available!
A small minicomputer with a RockChip RK3328 quad-core SoC chip (ARM Cortex-A53). The computer is equipped with 1 GB DDR4 RAM, Gigabit Ethernet port and USB 3.0. Each module has its own unique MAC address. NanoPi NEO3 1GB
Retired
No product available!
A small minicomputer with a RockChip RK3328 quad-core SoC chip (ARM Cortex-A53). The computer is equipped with 2 GB DDR4 RAM, Gigabit Ethernet port and USB 3.0. Each module has its own unique MAC address. NanoPi NEO3 2GB
Retired
No product available!
White case for the NanoPi NEO3 minicomputer. It allows easy access to the Ethernet connector, USB, microSD cards and the power connector. FriendlyELEC Case for NEO3
Retired
No product available!
HDMI to CSI-2 bridge module based on TC358840 chip. It has a 22-pin FPC connector with a pitch of 0.5 mm and an audio connector. The input signal is supplied through the HDMI connector. Auvidea 70511
Retired
No product available!
Image capture module for Raspberry Pi. Captures high definition video from digital (HDMI/DVI), analog (YPbPr component) and computer (RGB) sources in 480p, 720p and 1080p. Picapture HD1
Retired
No product available!
3.5-inch TFT LCD display with case designed for Raspberry Pi. The display with a resolution of 320x480 px is equipped with a resistive touch screen. ArduCAM U611101
Retired
No product available!
Case dedicated to minicomputers Cubieboard and Cubieboard 2. Cubieboard Deluxe Case
Retired
No product available!
Development kit with Artix-7 100T FPGA chip, compatible with the PC/104 standard. The set is equipped with 512 MB DDR3 memory, Zmod port and Pmod ports. Digilent 410-398
Retired
No product available!
GPS module with u-blox ZED-F9R. Uses Automotive Dead Reckoning (ADR) technology. Provides highly accurate and continuous positioning by combining the 3D IMU sensor, vehicle dynamics model, correction data and GNSS measurements. SparkFun GPS-16475
Retired
No product available!
GPS module with u-blox ZED-F9R. Uses Automotive Dead Reckoning (ADR) technology. Provides highly accurate and continuous positioning by combining the 3D IMU sensor, vehicle dynamics model, correction data and GNSS measurements. SparkFun GPS-16344
Retired
No product available!
chipKIT Network Shield