ESP32-S3 development board with 1.8″ AMOLED touch display, battery 368×448 - Waveshare 29957
ID: 1197649
5902186330962
zł139.90
Tax included
zł113.74 tax excl.
ESP32-S3-Touch-AMOLED-1.8 is a versatile development module with an AMOLED screen and built-in battery power, designed for mobile applications, wearable devices, IoT controllers, and interactive user interfaces. Support for graphics, touch, gestures, and audio enables the implementation of complex functions in a compact form.
Description
Miniature module with the ESP32-S3R8 microcontroller featuring a dual-core Xtensa LX7 processor (up to 240 MHz), 2.4 GHz Wi-Fi, and Bluetooth 5 LE. The board includes a 1.8-inch color AMOLED display with a resolution of 368×448 px, offering 16.7 million colors and a wide 178° viewing angle. Capacitive touch is handled by the FT3168 chip (I2C interface), while the display is controlled via the QSPI interface.
The device integrates a QMI8658 IMU sensor, PCF85063 RTC, ES8311 audio codec, microphone, and speaker. It also includes the AXP2101 power management unit and a TF card slot. Power is supplied by the included 3.7 V lithium battery, rechargeable via the USB Type-C port. The enclosure with a hinged cover allows easy integration into DIY and embedded projects.
Features
- ESP32-S3R8 with dual-core Xtensa 32-bit LX7 processor up to 240 MHz
- Support for 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 LE
- 16 MB Flash, 8 MB PSRAM, 512 kB SRAM, 384 kB ROM
- 1.8" AMOLED display, 368×448 px, 16.7 million colors, QSPI interface
- Capacitive touch support (FT3168) via I2C interface
- QMI8658 IMU sensor (3-axis accelerometer and 3-axis gyroscope)
- PCF85063 RTC powered by AXP2101 with backup battery support
- ES8311 audio codec, microphone, speaker
- TF card slot, USB Type-C port, PWR and BOOT buttons
- MX1.25 connector with included 3.7 V lithium battery
- Available GPIO, UART, I2C, USB
Included
- ESP32-S3-Touch-AMOLED-1.8 module x1
- 3.7 V lithium battery (MX1.25) x1
1197649
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
A small USB-UART TTL converter module based on the CH340 system with a USB type A connector. Designed for the ESP-01 and ESP-01S modules
zł5.29
24h
Available quantity: 13
Available
A small DIP adapter with a 2.54 mm goldpin connector. Designed for the ESP-01 and ESP-01S modules
zł2.58
24h
Available quantity: 37
Available
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-17381
zł154.62
3 weeks
No product available!
Development board with WiFi and Bluetooth module Espressif ESP32-WROVER. It is equipped with a microSD card slot, a USB-UART converter and a Li-Ion battery charging system. TTGO T8 V1.1 ESP32
zł76.09
24h
Available quantity: 4
Available
Development board with WiFi and Bluetooth ESP32 module. It is equipped with an IPS 1.14" LCD display, a USB-UART converter and a Li-Ion battery charging system. ModESPttgo1.14"
zł64.89
24h
Available quantity: 4
Available
Module with 9-axis IMU LSM9DS1 system dedicated to ESP Thing board. Equipped with a connector for connecting GPS and a microSD slot. SparkFun DEV-14430
zł117.93
24h
Available quantity: 2
Available
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1
zł255.85
4 weeks
No product available!
Development board with ESP32 module (WiFi + Bluetooth). Equipped with a 40-pin connector compatible with Raspberry Pi HAT. Waveshare ESP32 One
zł60.52
24h
Available quantity: 2
Available
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter. Totem TE-X4-KIT2
Regular pricezł194.99zł166.10
24h
Available quantity: 1
Available
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter and Li-Ion battery. Totem TE-X4-KIT3
Regular pricezł244.91zł208.57
24h
Available quantity: 1
Available
Module with WiFi Espressif ESP32-S2 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, SPI, UART, I2S and I2C. SparkFun WRL-15663
zł113.18
24h
Available quantity: 3
Available
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFRobot DFR0654
zł48.89
24h
Available quantity: 10
Available
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F
zł53.96
24h
Available quantity: 3
Available
Development board with ESP-WROOM-32 module. It allows communication within the WiFi network and the Bluetooth 4.2 (BLE) standard
zł26.94
24h
Available quantity: 15
Available
Module with ATSAMD51J19 microcontroller and ESP32 WiFi system dedicated to matrix displays with HUB75 interface. Adafruit 4745
zł127.44
24h
Available quantity: 1
Available
Module with WiFi Espressif ESP32-S2. It integrates two regulators, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4775
zł125.87
24h
Available quantity: 2
Available
ESP32-S3-Touch-AMOLED-1.8 is a versatile development module with an AMOLED screen and built-in battery power, designed for mobile applications, wearable devices, IoT controllers, and interactive user interfaces. Support for graphics, touch, gestures, and audio enables the implementation of complex functions in a compact form.