ESP32-S3 development board with 2″ capacitive touch display 240×320 - Waveshare 29667

ESP32-H2-DevKitM-1 is an advanced development board designed for building IoT devices communicating via Zigbee, Thread, Matter, and Bluetooth LE protocols. Thanks to its energy-efficient RISC-V microcontroller, integrated antenna, wide range of peripheral interfaces, and easy access to GPIO pins, the board is an excellent choice for smart home projects, distributed sensors, and battery-powered devices.

Evaluation board with the ESP32-S2-SOLO-N4R2 module enables the development of applications using 2.4 GHz Wi-Fi and extensive peripheral interfaces. Equipped with 4 MB Flash and 2 MB PSRAM, as well as an integrated PCB antenna, it provides a solid foundation for building IoT projects, automation systems, monitoring solutions, and smart devices. With rich functionality and a large number of GPIO pins, it supports the implementation of even advanced embedded systems.

The ESP32-S3FH4R2 development board is based on the Xtensa 32-bit LX7 dual-core processor. It offers comprehensive wireless connectivity, including 2.4GHz Wi-Fi and Bluetooth LE. Equipped with 512 KB SRAM, 384 KB ROM, 2 MB PSRAM and 4 MB Flash memory, as well as a rich set of peripheral interfaces, the board is ideal for advanced technology projects and supports popular development environments such as ESP-IDF, MicroPython and Arduino IDE. Waveshare ESP32-S3-Tiny

This IoT audio development kit is based on the ESP32-A1S module with a dual-core Xtensa LX6 processor. It enables high-quality audio playback with 3.5mm audio outputs and 4Ω/3W speaker connectors. It supports Wi-Fi, Bluetooth 4.2, microSD cards up to 64GB, and the ESP-ADF framework with Google Assistant and Amazon Alexa integration.

Waterproof controller with ESP32 module in an industrial-grade housing designed for demanding applications. It uses the Espressif ESP32 chip with the Xtensa® 32-bit LX6 core and a built-in Wi-Fi module. It is equipped with a 2-inch IPS display with a touch panel. M5stack K034

Board with WiFi Espressif ESP32-S2 module and 0.96" LCD display. It offers 4 MB Flash memory and 8 MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-LCD-0.96-M

ESP32-S3-Touch-LCD-1.85 is an advanced development board based on the ESP32-S3, offering Wi-Fi 6 and Bluetooth 5 connectivity, a 1.85″ IPS touchscreen with 360×360 resolution, and numerous peripheral functions such as audio, TF card, and motion sensors. The integrated components make it an ideal choice for HMI interfaces, speech recognition projects, AI applications, and multimedia control.

ESP32-S3R8 microcontroller development board featuring a 3.16-inch 320x820 color LCD display with an ST7701 controller. It offers 2.4GHz Wi-Fi and Bluetooth 5 connectivity, 16MB of Flash, and 8MB of PSRAM for high performance and support for rich graphics interfaces (LVGL). Onboard features include a QMI8658 motion sensor (6-axis IMU), a PCF85063 RTC, a microSD slot, UART/I2C/USB connectors, a 3.7V battery connector with charging, and a USB Type-C port. Waveshare ESP32-S3-LCD-3.16

Espressif ESP32-C6 WiFi module board with RISC-V core. It offers 4 MB Flash and 512 KB SRAM and RGB diode. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C6-Zero

ESP32-S3-LCD-5B is a high-performance development board with a 5-inch high-resolution display, offering extensive communication capabilities and external power input in the range of 7–36 V. With expanded memory, isolated inputs/outputs, and support for Wi-Fi and Bluetooth, it is suitable for industrial HMI systems, smart control panels, and IoT projects where touch functionality is not required.

ESP32-S3-DevKitC-1U-N8R8 board with Wi-Fi, BLE, 8 MB flash, and 8 MB PSRAM for IoT projects and AI applications. Espressif ESP32-S3-DevKitC-1U-N8R8

ESP32-S2-DevKitC-1U-N8R2 is an evaluation board featuring the ESP32-S2-SOLO-2U module, designed for developing wireless applications using 2.4 GHz Wi-Fi communication. The use of a U.FL connector allows for the integration of an external antenna, making it particularly useful in environments requiring extended range or signal isolation. With a wide range of available interfaces and large memory capacity, the board is ideally suited for IoT projects, building automation, remote control systems, and monitoring applications.

ESP32-P4-WIFI6-Touch-LCD-3.4C development board with a 3.4-inch AMOLED display, Wi-Fi 6 and Bluetooth 5 (LE) support, two microphones with echo cancellation, and hardware security features. A solution for AI, HMI, and IoT projects requiring high performance and precise touch interaction.

ESP32-C6-DEV-KIT-N16 is a versatile development board with support for Wi-Fi 6, Bluetooth 5, and Zigbee/Thread, based on the ESP32-C6 microcontroller with 16 MB of Flash memory. The version without soldered pin headers allows flexible integration in projects with non-standard mounting requirements, while still providing full functionality and a rich set of interfaces for IoT applications, automation, and embedded systems.

ESP32-S3-LCD-4.3 is an advanced evaluation board for graphical and IoT applications, offering a high level of integration with an IPS display, wireless connectivity, and a rich set of interfaces. The non-touch version allows focus on implementing visual interfaces in control systems, data visualization, and consumer devices, while ensuring flexibility and ease of integration.

ESP32-S3-Touch-LCD-2.8C is an advanced development board with a high-resolution IPS display and touch support. High computing power, rich interface and sensor equipment, as well as support for Arduino and ESP-IDF environments make it a versatile tool for HMI projects, IoT devices, and data visualization systems. Ideal for applications requiring an interactive display with an intuitive touch interface.