ESP32-S3 ETH development board with 10/100 Mbs Ethernet, PoE, and OV2640 camera - Waveshare 28772

The ESP32-S3-DevKitC-1-N8R2 is an advanced development board with the ESP32-S3-WROOM-1/1U module, offering versatile wireless connectivity with support for 2.4 GHz WiFi and Bluetooth LE 5.0. With high computational power, ample memory, and a wide range of interfaces, this board is perfect for a variety of applications, including IoT, automation, and smart agriculture. Espressif Systems ESP32-S3-DevKitC-1-N8R2

A set for testing ambient temperature and humidity as well as air quality. It is a combination of the M5Stack Basic host module, the SHT30 temperature and humidity sensor and the PMSA003 digital universal particle concentration sensor. M5Stack K023-b

Development board with WiFi and Bluetooth ESP32 module. It is equipped with an IPS 1.14" LCD display, a USB-UART converter and a Li-Ion battery charging system. ModESPttgo1.14"

Bosch Sensortec\'s BME688 development kit enables testing of applications based on temperature, barometric pressure, humidity, and gas detection. The first AI-enabled environmental sensor, the BME688 can distinguish between different gas compositions by analyzing their "electronic fingerprints." The kit is configurable using BME AI-Studio software, which optimizes performance and power consumption, and the eight-sensor board enables testing of multiple configurations simultaneously. SparkFun DEV-19630

Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F

A development board featuring the ESP32-C6 WROOM-1-N16 module from Espressif. It features a single-core RISC-V processor and a wide range of connectivity options, including 2.4 GHz WiFi 6, Bluetooth 5.3, Zigbee, and Thread (802.15.4). The module is Feather-compatible and provides 23 GPIO pins on 2.54 mm pitch connectors. SparkFun DEV-22924

Module with WiFi Espressif ESP32-S2. It integrates two 3.3 V stabilizers, SPI Flash memory, LiPo charging circuit, light sensor and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4769

Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices using a rich set of GPIOs. Seeed Studio 114993071

Espressif ESP32-C3FH4 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 400 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C3-Zero-M

ESP32-S3-LCD-2 is a versatile development board with a 2" display and Wi-Fi/Bluetooth connectivity, which, thanks to its compact size and built-in motion sensor, is suitable for portable graphic applications and IoT projects. Although the OV5640 camera module is not included in the set, the board remains compatible with such solutions, allowing future expansion with image and video capture functions.

Development board with ESP32-C6 Mini-1 module from Espressif. It supports WiFi 6, Bluetooth® 5.3, Zigbee and Thread (802.15.4) protocol and offers various interface options including SPI, UART, LPUART, I2C, I2S, PWM LED controller, USB Serial/JTAG, ADC. Dedicated to IoT applications and battery-powered devices. SparkFun DEV-22925

ESP32-S3 development board equipped with a 32-bit dual-core Xtensa 32-bit LX7 processor. It is equipped with a 1.14-inch IPS LCD display with a resolution of 240 x 135 pixels and a micro SD card slot. It has the format of a USB dongle with a type A connector, which makes it convenient and handy to use. Waveshare ESP32-S3-GEEK

ESP32-C3-LCD-0.71-B is a compact, energy-efficient module with an IPS display and wireless connectivity, featuring a protective enclosure and lens. Ideal for portable projects such as watches, graphic interface sensors, simulation systems, or touch-controlled devices. With support for LVGL and flexible expansion options, it is suitable for a wide range of embedded applications.

Espressif ESP32 is an integrated circuit that combines Wi-Fi functionality and Bluetooth 4.0 BLE. Integrated 32-bit, dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be powered by 2.2V-3.6V. The system has a housing QFN48 (6x6mm). ESP32 Chip

Development board with ESP32 chip with WiFi and Bluetooth communication. Equipped with a microSD card slot, USB Type-C connector for programming and Ardunio Uno Rev3 compatible connectors and Qwiic connector. SparkFun WRL-19177

Function module designed for MicroMod boards. It allows you to add WiFi wireless communication based on the ESP32 chip to the project. SparkFun WRL-18430