ESP32-P4 development board with 3.4-inch 800x800 touch display, WiFi and Bluetooth - Waveshare 31523
ID: 1198963
5902186322769
zł312.75
Tax included
zł254.27 tax excl.
ESP32-P4-WIFI6-Touch-LCD-3.4C development board with a 3.4-inch AMOLED display, Wi-Fi 6 and Bluetooth 5 (LE) support, two microphones with echo cancellation, and hardware security features. A solution for AI, HMI, and IoT projects requiring high performance and precise touch interaction.
Description
Development board featuring a 3.4-inch round AMOLED display with a resolution of 800×800, based on the ESP32-P4 chip with RISC-V cores, designed for human-machine interaction, environmental monitoring, audio systems, and IoT control applications. The touch panel supports 10-point capacitive touch and is covered with 6H tempered glass using optical bonding technology. It offers a wide 170° viewing angle, high contrast ratio of 1200:1, and brightness of 300 cd/m². The ESP32-C6-MINI module provides Wi-Fi 6 and Bluetooth 5 (LE) support via SDIO interface. Onboard are two microphones with echo cancellation, an ES8311 audio codec, MIPI-CSI camera interface, USB OTG port, TF card slot, speaker connector, and a 40-pin GPIO header partially compatible with Raspberry Pi extensions (adapter required). The device supports AI voice functions, voice platforms, hardware encryption, Secure Boot, and Flash Encryption.
Features
- Display: 3.4″ round AMOLED
- Resolution: 800×800
- Viewing angles: 170°
- Contrast: 1200:1
- Brightness: 300 cd/m²
- Surface: 6H tempered glass, optical bonding
- Processor: ESP32-P4, RISC-V 32-bit (dual-core + single-core)
- Memory: 32 MB PSRAM, 32 MB NOR Flash
- Touch: capacitive, 10-point (GT9271)
- Connectivity: Wi-Fi 6, Bluetooth 5 (LE) – ESP32-C6-MINI (SDIO interface)
- Interfaces: MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO TF, I²C, UART
- Audio: 2× microphones (with EC), ES8311 audio codec, PH 2.0 speaker connector
- GPIO: 40-pin header compatible with selected Raspberry Pi HATs
- Security: Secure Boot, Flash Encryption, TRNG, access protection
- Dimensions: 115.0 × 115.0 mm
- Display area: 87.6 × 87.6 mm
Included in the set
- ESP32-P4-WIFI6-Touch-LCD-3.4C ×1
- 4-pin cable ×2
- Speaker ×1
1198963
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Development board with ESP32 chip with WiFi and Bluetooth communication. Equipped with a microSD card slot, USB Type-C connector for programming and Ardunio Uno Rev3 compatible connectors and Qwiic connector. SparkFun WRL-19177
zł238.19
3 weeks
No product available!
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripherals - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, SPI, UART, I2S and I2C. SparkFun WRL-20168
zł175.13
24h
Available quantity: 1
Available
Versatile communication module based on the ESP32 microcontroller, designed for industrial automation and as an IoT gateway for PLCs. It supports fieldbus standards such as CAN and RS485, as well as wireless technologies Wi-Fi, BLE and 4G LTE, which enables integration with industrial networks and the cloud. Thanks to its rugged design and support for programming in ESP-IDF, the EdgeBox-ESP-100 is suitable for remote control and monitoring in harsh industrial environments. Seeed Studio 102991735
zł689.00
4 weeks
No product available!
Small AI development board based on ESP32-S3 SoC with integrated WiFi 802.11 b/g/n and BLE transceiver. It has a built-in 2 MP camera, LCD display and microphone. Espressif ESP32-S3-EYE
zł259.00
1 weeks
No product available!
Espressif ESP32-S2 WiFi chip module. It integrates a TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 53
zł129.49
24h
Available quantity: 2
Available
Multi-protocol module, SMD module ESP32-S3R8 with built-in 8 MB Octal PSRAM, 16 MB Quad SPI flash, and IPEX antenna connector.
zł29.90
24h
Available quantity: 10
Available
Espressif ESP32-S3 WiFi and BLE module board. It offers 8 MB of flash memory and 8 MB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991114
zł35.81
24h
Available quantity: 63
Available
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8-M
zł49.47
4 weeks
No product available!
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8
zł50.45
4 weeks
No product available!
Starter kit with 15 modules useful for learning (button, LED, display, sensors, etc.) and ESP32-S3-Pico-M board. Ideal for starting your electronics and programming adventure. Waveshare ESP32-S3-Pico-Sensor-Kit-B
zł201.25
24h
Available quantity: 4
Available
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico-M
zł43.60
4 weeks
No product available!
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico
zł37.72
24h
Available quantity: 7
Available
Espressif ESP32-S3 WiFi and BLE chip module with 1.14" TFT LCD display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5691
zł133.68
24h
Available quantity: 3
Available
Development board based on Bluetooth Low Energy and IEEE 802.15.4 ESP32-H2-MINI-1 module. The ESP32-H2-MINI-1 integrates a 2.4GHz transceiver compliant with Bluetooth Low Energy and IEEE 802.15.4 technologies, supporting Bluetooth 5 (LE), Bluetooth Mesh, Thread, Matter, and Zigbee. Espressif Systems ESP32-H2-DevKitM-1-N4
zł59.90
24h
Available quantity: 4
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993068
zł230.77
4 weeks
No product available!
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993069
zł407.82
24h
Available quantity: 2
Available
ESP32-P4-WIFI6-Touch-LCD-3.4C development board with a 3.4-inch AMOLED display, Wi-Fi 6 and Bluetooth 5 (LE) support, two microphones with echo cancellation, and hardware security features. A solution for AI, HMI, and IoT projects requiring high performance and precise touch interaction.