zł68.72 tax excl.
ESP32-S3-ePaper-1.54 V2 development board featuring a dual-core Xtensa LX7 processor running at 240 MHz, 8 MB Flash, 8 MB PSRAM, and a 1.54" black-and-white ePaper display with a resolution of 200 × 200 px. Supports 2.4 GHz WiFi and Bluetooth 5 LE, as well as audio recording and playback via the ES8311 codec. Equipped with an SHTC3 temperature and humidity sensor, PCF85063 RTC, microSD card slot, USB Type-C port, and GPIO expansion connectors. Designed for building portable IoT terminals, electronic labels, information displays, and voice interfaces. Non-touch version with a 3.7 V lithium battery included. Waveshare 32298.
AIoT development board with a 1.54" black-and-white ePaper display featuring a resolution of 200 × 200 pixels, designed for building portable IoT devices, electronic labels, information terminals, and voice interfaces. Waveshare ESP32-S3-ePaper-1.54 hardware revision V2 uses the ESP32-S3-PICO-1-N8R8 module with a dual-core Xtensa LX7 processor running at up to 240 MHz, 8 MB Flash, and 8 MB PSRAM. It supports 2.4 GHz WiFi and Bluetooth 5 LE connectivity, enabling wireless data exchange with devices and network services. The ePaper display retains its image without continuous power and provides good readability in daylight. Revision V2 also features optimized power consumption of the entire board in sleep mode.
The ePaper display uses an SPI interface and supports full and partial screen refresh. The 1.54" black-and-white panel can display text, icons, measurement readings, and simple graphics. The integrated SHTC3 temperature and humidity sensor supports environmental monitoring projects, while the PCF85063 real-time clock provides timekeeping functionality. The microSD card slot allows data, images, and application files to be stored.
The board features a microphone, ES8311 audio codec, and speaker for audio recording and playback. The audio system supports the development of voice-controlled interfaces, audio notifications, and devices that interact with external speech recognition services and AI models. GPIO, UART, and I2C pins are available through two 6-pin female headers with a 2.54 mm pitch for connecting additional devices and sensors. The USB Type-C port supports microcontroller programming and communication with a computer, while the BOOT and PWR buttons provide control over selected board functions.
The integrated 3.7 V lithium battery charging management circuit supports the development of portable devices. The included battery can be installed inside the enclosure. The board supports Arduino IDE and ESP-IDF, and the manufacturer provides technical documentation, instructions, and example programs. Hardware revision V2 requires software examples specifically designed for the updated hardware, as V1 and V2 programs are not interchangeable. The Waveshare 32298 variant does not support touchscreen functionality.

Manufacturer
Responsible person
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 433 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.2
No product available!
IoT development board equipped with ESP32 chip with WiFi and Bluetooth, has a USB-UART interface allowing programming via the USB port of the computer. DFRobot DFR0625
A device with modifiable functionality that works under the control of the NodeMCU ESP32 system. It combines two wireless technologies: Bluetooth 4.1 and WiFi. iNode MCU USB
Evaluation kit with WiFi/Bluetooth module BLE ESP32-WROOM-32U. The board is equipped with a USB-UART converter, which through the microUSB connector allows you to power and program the board. Espressif ESP32-DevKitC-32U
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-15663
M5Stack series development kit equipped with WiFi and Bluetooth ESP32 module. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K010
No product available!
Compact development platform based on the ESP32-PICO-D4 microcontroller, featuring WiFi and Bluetooth connectivity, a Grove interface, a programmable RGB LED, an infrared transmitter, and a USB Type-C connector. Its compact dimensions, exposed GPIO pins, and extensive expansion capabilities make it suitable for IoT projects, automation systems, wearable devices, and embedded applications. M5Stack C008
Compact development platform based on the ESP32-PICO-D4 microcontroller, featuring WiFi and Bluetooth connectivity, a 5 × 5 programmable RGB LED matrix, a 6-axis IMU sensor, a Grove interface, and a USB Type-C connector. Its compact dimensions, rich set of interfaces, and integrated display and motion-sensing capabilities make it suitable for IoT projects, automation systems, wearable devices, and embedded applications. M5Stack C008-B
Compact M5Stack series development kit equipped with ESP32 Pico. It is based on a loudspeaker, I2S amplifier and a microphone. It will work in IoT-related projects, as a portable Bluetooth speaker or a voice-controlled device. M5Stack C008-C
MicroMod main module with ESP32 chip. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun WRL-16781
No product available!
A small USB-UART TTL converter module based on the CH340 system with a USB type A connector. Designed for the ESP-01 and ESP-01S modules
A small DIP adapter with a 2.54 mm goldpin connector. Designed for the ESP-01 and ESP-01S modules
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-17381
No product available!
LILYGO T8-S3 V1.2 development board featuring a dual-core ESP32-S3 microcontroller running at 240 MHz, 16 MB Flash memory and 8 MB PSRAM. Supports 2.4 GHz WiFi and Bluetooth 5.0 LE, and includes a microSD card slot, USB Type-C connector, GPIO pins, WiFi antenna and 3.7 V Li-Po battery connector. LILYGO T8-S3 [H669]
No product available!
Development board with WiFi and Bluetooth ESP32 module. It is equipped with an IPS 1.14" LCD display, a USB-UART converter and a Li-Ion battery charging system. LilyGo T-Display ESP32 4MB
No product available!
Module with 9-axis IMU LSM9DS1 system dedicated to ESP Thing board. Equipped with a connector for connecting GPS and a microSD slot. SparkFun DEV-14430
ESP32-S3-ePaper-1.54 V2 development board featuring a dual-core Xtensa LX7 processor running at 240 MHz, 8 MB Flash, 8 MB PSRAM, and a 1.54" black-and-white ePaper display with a resolution of 200 × 200 px. Supports 2.4 GHz WiFi and Bluetooth 5 LE, as well as audio recording and playback via the ES8311 codec. Equipped with an SHTC3 temperature and humidity sensor, PCF85063 RTC, microSD card slot, USB Type-C port, and GPIO expansion connectors. Designed for building portable IoT terminals, electronic labels, information displays, and voice interfaces. Non-touch version with a 3.7 V lithium battery included. Waveshare 32298.