Beetle ESP32-C3 - board with ESP32-C3 WiFi and BT module
ID: 1179241
5902186310407
zł35.26
Tax included
zł28.67 tax excl.
Board with WiFi and Bluetooth Espressif ESP32-C3 module. It offers 4MB Flash and 400KB SRAM and a LiPo charging circuit. The set includes an expansion board with a display connector. DFRobot DFR0868
Description
Board with the WiFi Espressif ESP32-C3 module. It has 4 MB of Flash memory, 400 KB of SRAM memory and an integrated 2.4 GHz WiFi and Bluetooth 5 transceiver. The board has a LiPo charging system. On 13 GPIO pins, the user has at his disposal analog inputs, PWM, I2C, UART, SPI and I2S interface.
The set includes an expansion board, on which the user will find several prototype holes and a connector with a GDI interface that allows connection to the display module.
The module offers great possibilities in the field of IoT systems and can be used both to control LEDs and to transfer data to a specific platform. It can also be programmed using Arduino IDE, ESP-IDF or MicroPython. Full documentation is available on the product page.
Features
- RISC-V 32-bit single-core processor
- 4 MB SPI Flash Memory
- 400 KB of SRAM
- Wi-Fi 2.4 GHz, IEEE 802.11b/g/n
- Bluetooth 5 (BLE + Mesh)
- PCB antenna
- LiPo charging circuit
- Power supply: USB type C
- 13 GPIO pins: 6 analog inputs ADC 12-bit, PWM, I2C, UART, SPI, I2S
- Expansion module with GDI connector
- Dimensions: 25 x 20.5 mm
Kit contains
- Beetle ESP32-C3
- Beetle ESP32-C3 expansion module
- 2 x 8-pin straight goldpin connector
1179241
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
zł4.26
24h
Available quantity: 8
Available
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
zł5.08
24h
Available quantity: 38
Available
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
zł5.61
24h
Available quantity: 67
Available
LCD IPS module with a screen diagonal of 2" and a resolution of 320x240 pixels. The display has a built-in ST7789V driver and communicates via the SPI interface. The display can also work via the GDI port. DFRobot DFR0664
zł74.99
24h
Available quantity: 1
Available
Other products in the same category (16)
ESP32 development board with a 3.5inch capacitive IPS touch display 320x480, onboard audio codec, microphone and speaker, supporting Wi-Fi and BLE, supplied with a lithium battery. ESP32-Touch-LCD-3.5 Waveshare 32870
zł130.66
6 weeks
No product available!
Development board based on the ESP32-C5 with a 240 MHz RISC-V processor supports dual-band Wi-Fi 6 (2.4 GHz and 5 GHz), Bluetooth LE, Zigbee, and Thread. The version with pre-soldered pin headers and 16 MB Flash plus 8 MB PSRAM is intended for IoT applications and multi-protocol gateways. Waveshare ESP32-C5-WIFI6-KIT-N16R8-M
zł50.06
6 weeks
No product available!
Development board based on the ESP32-C5 microcontroller with a 240MHz RISC-V processor, supporting dual-band Wi-Fi 6 (2.4GHz and 5GHz), Bluetooth LE, Zigbee, and Thread, equipped with 16MB Flash and 8MB PSRAM, designed for IoT applications and multi-protocol gateways. Waveshare ESP32-C5-WIFI6-KIT-N16R8
zł47.66
6 weeks
No product available!
The ESP32-P4-WIFI6-POE-ETH-D is an advanced Waveshare development board based on the ESP32-P4 and ESP32-C6 microcontrollers, designed for HMI applications, edge computing, multimedia processing, and industrial systems. It supports Wi-Fi 6, Bluetooth 5 LE, 100 Mbps Ethernet with PoE power supply, and a rich set of video, audio, and I/O interfaces. ESP32-P4-WIFI6-POE-ETH-D
zł373.90
6 weeks
No product available!
ESP32-P4-WIFI6-POE-ETH-C is a high-performance Waveshare development board based on the ESP32-P4 and ESP32-C6 microcontrollers, designed for advanced HMI, edge computing, multimedia, and networked systems. It supports Wi-Fi 6, Bluetooth 5 LE, 100 Mbps Ethernet with PoE, and a rich set of video, audio, and I/O interfaces. ESP32-P4-WIFI6-POE-ETH-C
zł168.14
6 weeks
No product available!
ESP32-P4-WIFI6-POE-ETH is a high-performance Waveshare development board based on the ESP32-P4 and ESP32-C6 microcontrollers, designed for advanced HMI, edge computing, multimedia, industrial automation, and networked systems. It supports Wi-Fi 6, Bluetooth 5 LE, 100 Mbps Ethernet with PoE, and a rich set of I/O and multimedia interfaces. ESP32-P4-WIFI6-POE-ETH
zł113.32
6 weeks
No product available!
ESP32-S3 development board featuring a dual-core 240MHz processor, 2.4GHz Wi-Fi connectivity, 32MB Flash and 16MB PSRAM, supplied in a version with factory pre-soldered pin headers, designed for AIoT and embedded system projects. Waveshare ESP32-S3-DEV-KIT-N32R16V-M
zł75.45
6 weeks
No product available!
Development board based on the ESP32-S3-WROOM module with a dual-core 240 MHz processor, 32 MB Flash and 16 MB PSRAM, supporting 2.4 GHz Wi-Fi and Bluetooth LE, designed for IoT and AIoT projects. Waveshare ESP32-S3-DEV-KIT-N32R16V
zł68.01
6 weeks
No product available!
Development board based on the ESP32-S3 microcontroller, featuring a round 1.32-inch AMOLED capacitive touch display with a resolution of 466 × 466, support for 2.4 GHz Wi-Fi and Bluetooth 5 LE, as well as audio circuitry and expansion interfaces. Designed for wearable projects, user interfaces, IoT applications, and voice interaction solutions. ESP32-S3-Touch-AMOLED-1.32
zł103.16
6 weeks
No product available!
ESP32-C6 1.32inch AMOLED Round Touch Display Board, 466×466 Pixels, QSPI Interface - Waveshare 32766
ESP32-C6 1.32inch AMOLED Round Touch Display Development Board, 466×466 Pixels, QSPI Interface, Supports Wi-Fi 6 and Bluetooth 5. ESP32-C6-Touch-AMOLED-1.32
zł97.31
6 weeks
No product available!
ESP32-C6-based programmable smartwatch development board featuring a 2.06-inch AMOLED touch display with a resolution of 410 × 502, supporting Wi-Fi 6, Bluetooth 5 and Zigbee, designed for DIY wearable device development and prototyping. Waveshare ESP32-C6-Touch-AMOLED-2.06-EN
zł135.61
6 weeks
No product available!
A smartwatch-style development board based on the ESP32-C6 microcontroller, featuring a 2.06-inch AMOLED touch display with 410 × 502 resolution, supporting Wi-Fi 6, Bluetooth 5 and Zigbee, designed for DIY construction and prototyping of wearable devices, with an MX1.25 lithium battery included. Waveshare ESP32-C6-Touch-AMOLED-2.06
zł139.48
6 weeks
No product available!
Development board based on the ESP32-S3 microcontroller, featuring a 1.83 inch IPS touch display with a resolution of 240 x 284, WiFi and Bluetooth 5 connectivity, onboard audio codec, microphones, and speaker, designed for IoT projects and interactive applications. Waveshare ESP32-S3-Touch-LCD-1.83-EN
zł99.22
6 weeks
No product available!
Development board based on the ESP32-S3 microcontroller, featuring a 1.83 inch IPS touch display with a resolution of 240 x 284, WiFi and Bluetooth 5 connectivity, onboard audio codec, microphones, speaker, and an included 3.7 V lithium battery, designed for IoT projects and interactive applications. Waveshare ESP32-S3-Touch-LCD-1.83
zł103.98
6 weeks
No product available!
An intelligent digital photo frame based on the ESP32-S3 microcontroller, featuring a 7.3-inch full-color E Ink Spectra 6 (E6) e-paper display with a resolution of 800 × 480 pixels, enclosed in an elegant solid wood frame. The device offers ultra-low power consumption, Wi-Fi and Bluetooth connectivity, AIoT capabilities, voice interaction, and photo and information display, making it ideal for decorative and informational applications. ESP32-S3-PhotoPainter (no BAT)
zł347.29
6 weeks
No product available!
An intelligent digital photo frame based on the ESP32-S3 microcontroller, equipped with a 7.3-inch full-color E Ink Spectra 6 (E6) e-paper display with a resolution of 800 × 480 px, enclosed in an elegant solid wood frame. Support for Wi-Fi, Bluetooth, AIoT, and voice interaction, combined with ultra-low power consumption and the option of powering from a 3.7 V lithium battery, makes it suitable for decorative and informational applications. Waveshare ESP32-S3-PhotoPainter
zł346.71
6 weeks
No product available!
Board with WiFi and Bluetooth Espressif ESP32-C3 module. It offers 4MB Flash and 400KB SRAM and a LiPo charging circuit. The set includes an expansion board with a display connector. DFRobot DFR0868