Qwiic Pocket Development Board - development board with the ESP32-C6 module

Espressif ESP32-S3 WiFi and BLE chip module with 1.14" TFT LCD display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5691

Development kit with ESP32 module and LoRa communication. It is equipped with an integrated ESP32-C3 chip with a 32-bit RISC-V core processor and a Wio-E5 STM32WLE5JC module as a long-range controller that supports the LoRa protocol. Seeed Studio 114992985

Development board with ESP-WROOM-32 module. It allows communication within the WiFi network and the Bluetooth 4.2 (BLE) standard

A board with an ESP32 module equipped with a 4.3-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication as well as wired communication via RS485, CAN and I2C interfaces. Perfect for developing HMI projects using LVGL libraries. Waveshare ESP32-S3-Touch-LCD-4.3

Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, the module has a built-in system for charging Li-Pol batteries. The plate has soldered goldpin connectors (female extension). Adafruit 3619

Development board with WiFi ESP32-S2 module and 1.54" TFT LCD display. Equipped with a pressure, temperature and humidity sensor. Dedicated to build a home automation system. Adafruit 4985

Development board with Espressif ESP32-S3R8 WiFi and Bluetooth LE module equipped with a dual-core Xtensa 32-bit LX7 processor. It offers 16 MB Flash memory and 8 MB PSRAM. The pins available on the board are compatible with Arduino Nano ESP32. Waveshare ESP32-S3-Nano

Set with Adafruit HUZZAH32 (ESP32) board and expansion module with 8 BME688 sensors (gas, pressure, temperature and humidity sensor). Bosch BME688 Gas Sensor Developer Kit

An Ethernet-Wi-Fi development board that allows you to connect Ethernet devices via Wi-Fi. It consists of two development boards: Ethernet (A) and PoE (B). The Ethernet (A) includes the ESP32-WROVER-E Bluetooth/Wi-Fi module and IP101GRI, and the PoE module (B) provides the power over Ethernet function.

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption, attending to build the IoT hardware platform quickly and conveniently. DFR0482

Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. Uses the ESP32-C6-WROOM-1 module and two USB Type C connectors. ESP32-C6-DEVKITC-1-N8

Advanced module with a 32-bit, single-core RISC-V processor. It has a built-in Bluetooth LE 5 and IEEE 802.15.4 (Thread, Zigbee 3.0) module. Perfect solution for IoT (Internet of Things) projects. Version with connectors for selfassembly. Waveshare ESP32-H2-DEV-KIT-N4

Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripherals - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, SPI, UART, I2S and I2C. SparkFun WRL-20168

Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. Totem TE-X4-KIT1

The KAmod ESP32 POW+RS485 board equipped with the ESP32-WROOM32D 4MB (32Mb) module supports 2.4 GHz Wi-Fi, RS485 communication, also has a USB-UART converter, an efficient power supply system and a 40-pin connector compatible with Raspberry Pi, making it an ideal solution for home and industrial automation

Beetle ESP32 is a small (35 × 34mm) board thanks to which the creation of the Internet of Things (IoT) is very simple. The module was based on the ESP32 system, which allows for Bluetooth communication (compatible with Bluetooth 4.2) and WiFi. DFRrobot DFR0575