ESP32-S3 development board with 1.47″ display 172×320, Wi-Fi, Bluetooth, 16 MB flash - Waveshare 28317

ESP32-S3-Touch-LCD-4B is a ready-to-install development board with ESP32-S3 and a 4" touch screen, intended for use in building automation, HMI systems and voice interfaces. The compact 86×86 mm format facilitates integration in wall enclosures and control panels.

A board with a built-in ESP-WROOM-32 module and an 0.96 "OLED display (SSD1306) with a resolution of 128x64. The ESP32 system enables communication of WiFi 2.4 GHz and Bluetooth BLE v4.2 networks. modESP32_OLED

The ESP32-S3-Touch-LCD-1.69 board integrates Wi-Fi/Bluetooth microcontroller functionality with a color touch screen, IMU sensor, and RTC clock, offering a development platform for compact applications with a user interface. It is dedicated to use in wearable devices, HMI terminals, activity trackers, and modern low-power IoT solutions.

ESP32-S3-Touch-LCD-2.1 in the flat panel version is an advanced platform for developing interactive applications with a touch graphic interface. Thanks to its extensive feature set, including wireless connectivity, PSRAM memory, sensors, and battery power support, it is suitable for mobile devices, HMI interfaces, monitoring systems, and IoT projects.

Development board with WiFi ESP32-S2 module and 1.54" TFT LCD display. Equipped with a pressure, temperature and humidity sensor. Dedicated to build a home automation system. Adafruit 4985

Development kit with an ESP32 module featuring a 1.28-inch round display. Offers Wi-Fi and Bluetooth 5.0 communication. Perfect for IoT projects with a simple GUI. Espressif ESP32-C3-LCDkit

DFRobot FireBeetle 2 ESP32-C5 is a development board featuring Wi-Fi 6 and support for Zigbee, Thread, and Bluetooth 5, equipped with solar charging and power-efficient management functions. Designed for IoT projects, Home Assistant systems, and battery-powered devices, it combines high performance with communication flexibility.

Starter kit based on ESP32-C6 with an included 1.5-inch OLED display, designed for a quick start with Arduino, MicroPython, and ESP-IDF, supported by educational resources for learning programming and IoT projects. Waveshare ESP32-C6-Zero-Basic-Kit

The KAmod ESP32 POW+RS485 board equipped with the ESP32-WROOM32D 4MB (32Mb) module supports 2.4 GHz Wi-Fi, RS485 communication, also has a USB-UART converter, an efficient power supply system and a 40-pin connector compatible with Raspberry Pi, making it an ideal solution for home and industrial automation

Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. Adafruit 3405

Board with the WiFi Espressif ESP32-C3 module. It offers 4 MB of Flash memory and 400 KB of SRAM and an RGB diode. It is equipped with a matrix of WS2812B programmable diodes

An intelligent AI development kit based on the ESP32-S3-WROOM-1-N16R16VA chip, designed for building advanced voice and multimedia interaction systems. The device supports 2.4 GHz Wi-Fi, Bluetooth 5 (LE), and offers integration with AI frameworks such as OpenAI and Gemini, enabling full-duplex voice communication. It features a 1.85-inch 360x360 touchscreen, dual microphones with sound source localization, and a 3W speaker for high-quality audio. With 16MB of Flash, 16MB of PSRAM, a microSD slot, 5V/3.7V power, and a USB-C connector, the EchoEar provides a comprehensive platform for building modern AI and IoT devices.

Powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32E 32MBit (4MB)

A development board that uses the ESP32-C3 chip based on the RISC-V architecture. It has built-in 400 KB of SRAM and 4 MB of Flash memory and a clock frequency of 160 MHz. Pro Micro offers a Qwiic connector that allows you to connect any sensor that communicates via the I2C bus. SparkFun DEV-23484

ESP32-P4-WIFI6-Touch-LCD-3.4C development board with a 3.4-inch AMOLED display, Wi-Fi 6 and Bluetooth 5 (LE) support, two microphones with echo cancellation, and hardware security features. A solution for AI, HMI, and IoT projects requiring high performance and precise touch interaction.

The ESP32-S3-LCD-1.9 board without a touch panel integrates the ESP32-S3R8 microcontroller, a 1.9" LCD display (170×320 px), and a set of peripherals such as a 6-axis IMU, TF card slot, and battery connector. This version includes an RGB WS2812 LED and enables the development of HMI applications, gesture control, motion recording, or interface creation using libraries such as LVGL. Thanks to compatibility with the Raspberry Pi Pico pin layout, the product is perfectly suited as a base for complex electronics and robotics projects.