Wi-Fi 6 multimedia kit with ESP32-P4 and ESP32-C6, 32 MB PSRAM, 32 MB Flash, 10.1" display, camera and speaker - Waveshare 32022

A development kit based on the ESP32-P4 microcontroller, featuring a 10.1-inch DSI capacitive touch display, 100 Mbps Ethernet with PoE support, camera module, and AI speech capabilities. Designed for advanced HMI, multimedia, and edge computing projects, it offers rich interfaces, high performance, and suitability for IoT and industrial applications. Waveshare ESP32-P4-POE-ETH-KIT-B

Development kit based on the high-performance ESP32-P4 microcontroller with a 100 Mbps Ethernet port, PoE support, and AI voice interaction. The KIT-A version includes the development board, PoE module, camera, and audio accessories, designed for HMI, edge computing, and IoT applications. Waveshare ESP32-P4-POE-ETH-KIT-A

A development board based on the high-performance ESP32-P4 microcontroller, equipped with a 100 Mbps Ethernet port and support for PoE (Power over Ethernet). This version includes the ESP32-P4-ETH-M board together with a PoE module and is intended for integration in HMI projects, edge computing applications, and IoT systems requiring wired network communication. Waveshare ESP32-P4-POE-ETH

Development board based on the high-performance ESP32-P4 microcontroller, featuring a 100 Mbps RJ45 Ethernet port and a rich set of multimedia and communication interfaces. The ESP32-P4-ETH-M version includes only the board with factory-soldered pin headers and is intended for standalone integration in HMI, edge computing, and IoT projects. Waveshare ESP32-P4-ETH-M

Development board based on the high-performance ESP32-P4 microcontroller, equipped with a 100 Mb/s RJ45 Ethernet port and a wide range of multimedia and communication interfaces. The Waveshare 32086 version includes only the ESP32-P4-ETH board without soldered pin headers, intended for custom assembly and integration in HMI, edge computing and IoT projects. Waveshare ESP32-P4-ETH

This development board combines Wi-Fi, Bluetooth, and LoRa technologies, ideal for IoT projects requiring long-range communication. Equipped with a dual-core 240 MHz processor and an 868 MHz SX1262 modem, it provides a transmission range of up to several kilometers with low power consumption. It features a built-in 0.96-inch OLED display, a CP2102 USB-to-UART converter, and a lithium battery charging circuit for mobile operation. Heltec Lora32-V3

An intelligent AI development kit based on the ESP32-S3-WROOM-1-N16R16VA chip, designed for building advanced voice and multimedia interaction systems. The device supports 2.4 GHz Wi-Fi, Bluetooth 5 (LE), and offers integration with AI frameworks such as OpenAI and Gemini, enabling full-duplex voice communication. It features a 1.85-inch 360x360 touchscreen, dual microphones with sound source localization, and a 3W speaker for high-quality audio. With 16MB of Flash, 16MB of PSRAM, a microSD slot, 5V/3.7V power, and a USB-C connector, the EchoEar provides a comprehensive platform for building modern AI and IoT devices.

This compact development board, powered by the ESP32-S3 chip, is equipped with a dual-core 240 MHz Xtensa LX7 processor, a RISC-V coprocessor, 8 MB of Flash, and 8 MB of PSRAM, making it ideal for IoT projects and wireless applications. It features 2.4 GHz Wi-Fi, Bluetooth 5.0 + Mesh, LiPo battery charging with health monitoring, and an RGB LED for signaling. Featuring a 3D high-gain antenna, a u.FL connector, and a USB-C interface with USB Serial JTAG support, the TinyS3[D] combines functionality and a miniature form factor in one versatile platform.

The FeatherS3[D] is a development board based on the ESP32-S3 in the popular Feather form factor, combining the advantages of the previous FeatherS3 and FeatherS3 uFL models. Equipped with a dual-core Xtensa LX7 240MHz processor, a RISC-V coprocessor, 16MB Flash, and 8MB PSRAM, it delivers high performance and the ability to implement complex projects. The board supports 2.4GHz Wi-Fi, Bluetooth 5.0 + Mesh, two 3.3V regulators, a LiPo battery charging system with health monitoring, and an RGB LED.

This ESP32-S3 development board is designed for demanding IoT and embedded systems projects. Equipped with a dual-core 240 MHz processor, a RISC-V coprocessor, 16 MB of Flash, and 8 MB of PSRAM, it offers high performance and flexibility. It also includes two 3.3 V regulators, a LiPo charging circuit with battery monitoring, a STEMMA QT connector, and a software antenna switch between the 3D High Gain antenna and u.FL. ProS3[D]

This ESP32-S3 development board features an M.2 B-Key connector for quick, solderless installation and upgrades. It features a dual-core 240MHz processor, a RISC-V coprocessor, 8MB of Flash, and 2MB of PSRAM for high performance and energy efficiency. The module supports 2.4GHz Wi-Fi, Bluetooth 5.0 + Mesh, and includes a software antenna switch between a 3D High Gain antenna and an external u.FL antenna. EdgeS3[D]

This ESP32-S3-based development board combines high processing power with energy efficiency and rich functionality. Equipped with a dual-core Xtensa LX7 processor (240 MHz), a RISC-V coprocessor, 8 MB of Flash, and 2 MB of PSRAM, it ensures smooth operation even in advanced IoT projects. The module supports 2.4 GHz Wi-Fi and Bluetooth 5.0 + Mesh, and thanks to the built-in LiPo charging circuit and battery monitoring, it can operate for extended periods in low-power mode. OMGS3

This ESP32-S3-based development board features a dual-core 32-bit 240 MHz processor, 8 MB of Flash memory, and 2 MB of PSRAM. Equipped with 2.4 GHz Wi-Fi with a 3D antenna, a built-in 7x7 RGB LED matrix, and 22 GPIO pins, it enables the creation of advanced IoT projects, visualizations, and interactive interfaces. The module includes a LiPo battery management circuit, two 3.3V 700 mA regulators, and a USB-C connector with protection. FeatherS3 Neo

This development board, based on the ESP32-C6 RISC-V microcontroller, combines high performance with energy efficiency. Equipped with a dual-core processor running at up to 160 MHz, it supports modern connectivity standards such as Wi-Fi 6, Bluetooth 5.3 LE, Zigbee, and Thread, making it an excellent platform for IoT projects and intelligent systems. The module features 8 MB of flash memory, a USB-C connector with short-circuit protection, and a LiPo battery charging circuit with voltage monitoring. TinyC6 ESP32-C6

This development board, based on the ESP32-C6 RISC-V microcontroller, combines high performance with energy efficiency. Equipped with a dual-core processor running at up to 160 MHz, it supports modern connectivity standards such as Wi-Fi 6, Bluetooth 5.3 LE, Zigbee, and Thread, making it an excellent platform for IoT projects and intelligent systems. The module features 8 MB of flash memory, a USB-C connector with short-circuit protection, and a LiPo battery charging circuit with voltage monitoring. TinyC6 ESP32-C6

This compact development board, featuring the ESP32-S3 module, offers high performance thanks to the Xtensa LX7 dual-core processor and a RISC-V coprocessor. Equipped with 8MB of Flash, 8MB of PSRAM, and 27 GPIO pins, it\'s ideal for IoT, AI, and memory-intensive applications. The module supports 2.4GHz Wi-Fi, Bluetooth 5.0 with Mesh, and a native USB interface with OTG and JTAG support for easy programming and debugging.