zł269.01
ESP32-S3 development board with 5″ touch display 1024×600 - Waveshare 28151
ID: 1197417
5902186308497
zł181.94
Tax included
zł147.92 tax excl.
ESP32-S3-Touch-LCD-5B is an advanced development platform featuring a high-resolution 5" IPS display with a five-point touch panel, designed for embedded projects, HMI panels, and automation. Its high processing power, versatile interfaces, and support for programming in C/C++ and MicroPython make the module suitable for both prototyping and fully developed industrial solutions.
Description
ESP32-S3-Touch-LCD-5B is an enhanced version of Waveshare's development board featuring the ESP32-S3 microcontroller, equipped with a 5-inch IPS display with a high resolution of 1024×600 and a capacitive touch panel supporting up to 5 touch points. The board is powered by a dual-core Xtensa LX7 processor (up to 240 MHz), integrates 16 MB of Flash memory and 8 MB of PSRAM, and supports 2.4 GHz Wi-Fi and Bluetooth 5 LE connectivity.
Designed for HMI and automation applications, it offers a rich set of interfaces: CAN, RS485, I2C, USB, opto-isolated digital inputs and outputs, and a TF card slot. With a wide power supply range of 7–36 V and support for lithium battery operation, the device can function autonomously in industrial environments.
Specifications
- Processor: Xtensa 32-bit LX7 dual-core, up to 240 MHz
- Memory: 512 KB SRAM, 384 KB ROM, 16 MB Flash, 8 MB PSRAM
- Connectivity: Wi-Fi 802.11 b/g/n 2.4 GHz, Bluetooth 5 LE
- Display: 5" IPS, 1024×600, 65K colors, 178° viewing angle
- Touch panel: capacitive, 5-point, tempered glass
- Communication interfaces: CAN, RS485, I2C, USB
- Digital inputs: 2×, 5–36 V, passive and active (NPN/PNP), opto-isolated
- Digital outputs: 2×, 5–36 V, open collector, up to 450 mA per channel, opto-isolated
- TF card slot
- Battery support: GH1.25 connector (3.7 V Li-Ion), with charging circuit and status indicators
- Power supply: USB Type-C 5 V, DC terminal 7–36 V
- LED indicators: power, charging, fully charged
- RTC with battery backup
- Buttons: BOOT, RESET
- Dimensions: 192.96 × 110.76 mm
- GUI support (e.g. LVGL), SDK, supported languages: C/C++, MicroPython
Included in the set
- ESP32-S3-Touch-LCD-5B module ×1
- 16-pin screw terminal (bottom wiring) ×1
1197417
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico-M
zł43.60
4 weeks
No product available!
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico
zł37.65
24h
Available quantity: 27
Available
Espressif ESP32-S3 WiFi and BLE chip module with 1.14" TFT LCD display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5691
zł133.68
24h
Available quantity: 3
Available
Development board based on Bluetooth Low Energy and IEEE 802.15.4 ESP32-H2-MINI-1 module. The ESP32-H2-MINI-1 integrates a 2.4GHz transceiver compliant with Bluetooth Low Energy and IEEE 802.15.4 technologies, supporting Bluetooth 5 (LE), Bluetooth Mesh, Thread, Matter, and Zigbee. Espressif Systems ESP32-H2-DevKitM-1-N4
zł59.90
24h
Available quantity: 3
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993068
zł227.59
24h
Available quantity: 4
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993069
zł407.82
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993070
zł266.01
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices using a rich set of GPIOs. Seeed Studio 114993071
zł415.00
24h
Available quantity: 1
Available
Board with WiFi and BLE Espressif ESP32-S3 module and OV3660 camera and digital microphone. It offers 8 MB Flash memory and 8 MB SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991115
zł64.98
24h
Available quantity: 105
Available
An Ethernet-Wi-Fi development board that allows you to connect Ethernet devices via Wi-Fi. It consists of two development boards: Ethernet (A) and PoE (B). The Ethernet (A) includes the ESP32-WROVER-E Bluetooth/Wi-Fi module and IP101GRI, and the PoE module (B) provides the power over Ethernet function.
zł339.01
24h
Available quantity: 1
Available
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700
zł74.24
24h
Available quantity: 1
Available
Development board equipped with ESP32-S3-WROOM-1 module. It is an interesting alternative to Arduino Uno boards. It has a compatible shape and pin layout, while making available the large resources offered by the ESP32 microcontroller. It can be programmed with Arduino, ESP-IDF, MicroPython and CircuitPython. SB Components 26647
Regular pricezł128.68zł105.31
24h
Available quantity: 2
Available
Waterproof controller with ESP32 module in an industrial-grade housing designed for demanding applications. It uses the Espressif ESP32 chip with the Xtensa® 32-bit LX6 core and a built-in Wi-Fi module. It is equipped with a 2-inch IPS display with a touch panel. M5stack K034
zł264.47
24h
Available quantity: 1
Available
A set for testing ambient temperature and humidity as well as air quality. It is a combination of the M5Stack Basic host module, the SHT30 temperature and humidity sensor and the PMSA003 digital universal particle concentration sensor. M5Stack K023-b
zł355.80
24h
Available quantity: 1
Available
Development kit from the M5Stack series equipped with the ESP32-S3 module. It will work well in projects related to IoT or in "wearable" devices. M5 Stack C124
zł44.90
24h
Available quantity: 4
Available
Development board based on the ESP32-C3-MINI-1 module. It offers the ability to connect via WiFi, Bluetooth version 5 and Bluetooth Mesh. It is equipped with sensors, such as the SHTC3 temperature and humidity sensor or the IMU 6 DoF ICM-42670-P sensor. Espressif Systems ESP32-C3-DevKit-RUST-1
zł123.06
24h
Available quantity: 1
Available
ESP32-S3-Touch-LCD-5B is an advanced development platform featuring a high-resolution 5" IPS display with a five-point touch panel, designed for embedded projects, HMI panels, and automation. Its high processing power, versatile interfaces, and support for programming in C/C++ and MicroPython make the module suitable for both prototyping and fully developed industrial solutions.