zł133.51 tax excl.
ESP32-S3-Touch-LCD-4 is a versatile development board featuring a 4-inch touchscreen and the ESP32-S3 microcontroller, offering high processing power, wireless communication support, and a wide range of interfaces. The touch panel, LVGL-based GUI, multiple connectors, and support for various power sources make it an excellent solution for interactive and control applications in embedded systems and automation.
ESP32-S3-Touch-LCD-4 is an advanced development board featuring the ESP32-S3N16R8 microcontroller and a 4" IPS display with a 480×480 resolution and a 5-point capacitive touch panel. The main unit is powered by a dual-core Xtensa LX7 processor running at up to 240 MHz, and integrates 8 MB of PSRAM and 16 MB of Flash memory. It supports 2.4 GHz Wi-Fi and Bluetooth 5 LE connectivity, making it ideal for HMI applications, control systems, interactive panels, smart home gateways, and industrial automation devices.
The board includes a range of communication interfaces such as CAN, RS485, I2C, and USB, along with a TF card slot and connectors for battery power. GUI support (e.g. LVGL), DIN rail mounting capability, and flexible wiring options (via rear and bottom screw terminals) ensure easy integration into target solutions.
Manufacturer
Responsible person
This ESP32-S3 development board features an M.2 B-Key connector for quick, solderless installation and upgrades. It features a dual-core 240MHz processor, a RISC-V coprocessor, 8MB of Flash, and 2MB of PSRAM for high performance and energy efficiency. The module supports 2.4GHz Wi-Fi, Bluetooth 5.0 + Mesh, and includes a software antenna switch between a 3D High Gain antenna and an external u.FL antenna. EdgeS3[D]
This ESP32-S3-based development board combines high processing power with energy efficiency and rich functionality. Equipped with a dual-core Xtensa LX7 processor (240 MHz), a RISC-V coprocessor, 8 MB of Flash, and 2 MB of PSRAM, it ensures smooth operation even in advanced IoT projects. The module supports 2.4 GHz Wi-Fi and Bluetooth 5.0 + Mesh, and thanks to the built-in LiPo charging circuit and battery monitoring, it can operate for extended periods in low-power mode. OMGS3
This ESP32-S3-based development board features a dual-core 32-bit 240 MHz processor, 8 MB of Flash memory, and 2 MB of PSRAM. Equipped with 2.4 GHz Wi-Fi with a 3D antenna, a built-in 7x7 RGB LED matrix, and 22 GPIO pins, it enables the creation of advanced IoT projects, visualizations, and interactive interfaces. The module includes a LiPo battery management circuit, two 3.3V 700 mA regulators, and a USB-C connector with protection. FeatherS3 Neo
This development board, based on the ESP32-C6 RISC-V microcontroller, combines high performance with energy efficiency. Equipped with a dual-core processor running at up to 160 MHz, it supports modern connectivity standards such as Wi-Fi 6, Bluetooth 5.3 LE, Zigbee, and Thread, making it an excellent platform for IoT projects and intelligent systems. The module features 8 MB of flash memory, a USB-C connector with short-circuit protection, and a LiPo battery charging circuit with voltage monitoring. TinyC6 ESP32-C6
No product available!
This compact development board, featuring the ESP32-S3 module, offers high performance thanks to the Xtensa LX7 dual-core processor and a RISC-V coprocessor. Equipped with 8MB of Flash, 8MB of PSRAM, and 27 GPIO pins, it\'s ideal for IoT, AI, and memory-intensive applications. The module supports 2.4GHz Wi-Fi, Bluetooth 5.0 with Mesh, and a native USB interface with OTG and JTAG support for easy programming and debugging.
This compact development board, featuring the ESP32-S3 module, offers high performance thanks to the Xtensa LX7 dual-core processor and a RISC-V coprocessor. Equipped with 8MB of Flash, 8MB of PSRAM, and 27 GPIO pins, it\'s ideal for IoT, AI, and memory-intensive applications. The module supports 2.4GHz Wi-Fi, Bluetooth 5.0 with Mesh, and a native USB interface with OTG and JTAG support for easy programming and debugging.
The ESP32-PICO-D4 development board combines the high performance of a dual-core 240MHz processor with Wi-Fi and Bluetooth BLE 4.2 connectivity. Equipped with the CH9102F USB-UART chip, a 3.3V (700mA) regulator, 4MB of PSRAM, and an on-board LiPo battery management system, it delivers powerful functionality with minimal power consumption. Compatible with the Arduino IDE, MicroPython, CircuitPython, and ESP-IDF. TinyPICO V3 USB-C
The ESP32-PICO-D4 development board combines the high performance of a dual-core 240MHz processor with Wi-Fi and Bluetooth BLE 4.2 connectivity. Equipped with the CH9102F USB-UART chip, a 3.3V (700mA) regulator, 4MB of PSRAM, and an on-board LiPo battery management system, it delivers powerful functionality with minimal power consumption. Compatible with the Arduino IDE, MicroPython, CircuitPython, and ESP-IDF. TinyPICO V3 USB-C
This compact ESP32-based board offers full functionality in a package measuring just 13 x 27 mm. Equipped with a 3.3 V regulator (700 mA), 4 MB of PSRAM, a battery charger, and 27 GPIO pins, it delivers high performance with minimal power consumption. Separate 5 V and 3.3 V power paths and automatic disconnection of unused components increase energy efficiency. The TinyPICO NANO works with the Arduino IDE, MicroPython, and ESP-IDF.
ESP32-P4-WIFI6-Touch-LCD-7B-C development board with IPS touch display and OV5647 camera designed for applications based on image recognition, voice interaction and remote control. High performance, Wi-Fi 6 support and a wide range of interfaces make it a comprehensive tool for modern AIoT and HMI projects.
Integrated board with ESP32-P4 and ESP32-C6-MINI and a 7-inch IPS touch screen with a resolution of 1024 × 600 intended for advanced IoT, AIoT, HMI and multimedia processing applications. Thanks to Wi-Fi 6 support, many industrial interfaces and strong security functions, it constitutes a versatile solution for next-generation embedded systems.
No product available!
ESP32-S3-Touch-LCD-4B is a ready-to-install development board with ESP32-S3 and a 4" touch screen, intended for use in building automation, HMI systems and voice interfaces. The compact 86×86 mm format facilitates integration in wall enclosures and control panels.
No product available!
ESP32-P4-WIFI6-KIT-B is a comprehensive kit with a touch display and camera, enabling the creation of advanced user interfaces, control systems and IoT applications with multimedia and voice data processing. It provides Wi-Fi 6 and BLE connectivity and advanced security mechanisms.
No product available!
ESP32-P4-WIFI6-KIT-A is a comprehensive kit for implementing HMI applications, voice control and image processing, integrating a camera, microphone and speaker as well as Wi-Fi 6 and BLE wireless communication. Intended for advanced projects in the field of human–machine interaction and IoT solutions with hardware security.
No product available!
ESP32-P4-WIFI6 is an advanced development board for HMI and multimedia processing applications, equipped with two ESP32 chips and Wi-Fi 6 and BLE connectivity. A rich set of interfaces and 32 MB PSRAM memory enable the development of complex projects with displays, cameras and sound.
No product available!
ESP32-S3-Touch-LCD-3.49 in the Case B version without a lithium-polymer battery is a compact and advanced development platform with dimensions of 98.50 × 28.99 × 22.80 mm, designed for creating projects in the field of IoT, HMI interfaces and systems with speech recognition.
No product available!
ESP32-S3-Touch-LCD-4 is a versatile development board featuring a 4-inch touchscreen and the ESP32-S3 microcontroller, offering high processing power, wireless communication support, and a wide range of interfaces. The touch panel, LVGL-based GUI, multiple connectors, and support for various power sources make it an excellent solution for interactive and control applications in embedded systems and automation.