ESP32-S3 development board with 2″ display 240×320 and OV5640 camera - Waveshare 30308

Module with WiFi Espressif ESP32-S2. It has 4MB Flash, 2MB PSRAM, and integrates a BME280 sensor, LiPo charging circuit, and RGB LED. Equipped with a STEMMA QT connector. Adafruit 5303

Development board based on the ESP32-S3-WROOM-1-N4 module, equipped with a 240 MHz Xtensa® LX7 processor, offering support for WiFi and Bluetooth 5.0, making it an ideal solution for IoT and AIoT projects. The module supports a wide range of peripheral interfaces and programming methods, such as Arduino IDE, ESP-IDF or MicroPython,. Thanks to the built-in AI acceleration, the board is perfect for applications such as voice recognition, text recognition or sensor data processing. DFRobot DFR1145

Module with WiFi Espressif ESP32-S2. It integrates the TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5300

Versatile ESP32 module with LoRa and Wi-Fi support, designed for monitoring people flow and creating mesh networks in difficult conditions, such as in areas cut off from the network. The device can detect Wi-Fi and Bluetooth signals, allowing estimation of the number of mobile devices in the environment without recording MAC addresses, which protects privacy. The module offers low power consumption, data storage on SD card and data transfer via LoRa WAN or MQTT, making it a reliable and self-sufficient solution for emergency communication. modTTGO LoRa32 v2.1

Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-15663

Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5323

This kit offers an attractive combination of a modern AMOLED display with the advanced functionality of the ESP32-S3, providing a powerful and compact solution for projects requiring graphics, motion sensors, and wireless communication. With a pre-soldered connector and aesthetically pleasing enclosure, the board is suitable for both prototyping and end-use applications. Waveshare ESP32-S3-AMOLED-1.91-M

Evaluation board with ESP32-S2-SOLO-U-N4 module designed for 2.4 GHz Wi-Fi wireless applications where external antenna connection is required. With a rich set of peripheral interfaces, compact dimensions, and 4 MB Flash memory, it is a suitable platform for IoT, automation, monitoring, and smart building and device systems.

ESP32-S3-Touch-LCD-2-C is a versatile development module with an IPS touch screen and OV5640 camera, designed for projects involving image processing, video analysis, and gesture control. With wireless communication, motion sensors, and extensive expansion capabilities, it is well-suited for IoT devices, mobile interactive systems, and compact user terminals.

Development board with WiFi and Bluetooth ESP32 module. It has been equipped with industrial interfaces RS485 and CAN. TTGO T-CAN485 ESP32

A compact IoT device that combines an ESP32S3 processor with a Wio-SX1262 LoRa module, enabling communication distances of up to 5 km in the 868–915 MHz band. With support for LoRaWAN, 2.4 GHz Wi-Fi, Bluetooth 5.0, and expansion options for GNSS and sensors, it is a versatile solution for IoT gateways and nodes. Seeed Studio 113110064

ESP32-S3-USB-OTG board with Wi-Fi, BLE, and USB-OTG for creating modern IoT projects and USB devices. Espressif ESP32-S3-USB-OTG

Integrated circuit, combining Wi-Fi functionality and Bluetooth 4.2 BLE. Integrated 32-bit dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be supplied with 2.2V-3.6V. The system has a QFN48 (5x5mm) housing. ESP32-D0WD

ESP32-P4-Module is a module featuring two chips: ESP32-P4 and ESP32-C6, offering support for 2.4 GHz Wi-Fi in the 802.11 b/g/n/ax standard and Bluetooth 5.3. With large memory, image and voice processing capabilities, and built-in security features, it is suitable for IoT applications, HMI, image and voice recognition systems, and smart industry.

The ESP32-P4-NANO-KIT-C set is an advanced development tool for projects requiring high performance, multiple interfaces, and high reliability. Built-in security features, communication extensions, and the ability to integrate with cameras and displays make it an excellent platform for creating modern IoT solutions, vision systems, and HMI applications with edge data processing.

Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico