.png)
ESP32-S3 AMOLED touch 2.16" 480x480 - Waveshare 33970
ID: 1204847
5902186338289
zł145.41
Tax included
zł118.22 tax excl.
Development board with ESP32-S3, 2.16" AMOLED touch display 480 x 480 px, 2.4 GHz Wi-Fi, BLE 5, dual microphones. No 3.7 V battery included. Waveshare ESP32-S3-Touch-AMOLED-2.16-EN
Description
Development board based on the ESP32-S3R8 chip with a dual-core Xtensa LX7 processor operating at up to 240 MHz. The system provides 512 kB SRAM, 384 kB ROM, 8 MB PSRAM and 16 MB Flash memory, enabling advanced IoT applications, communication systems and user interfaces.
The board integrates a 2.16" AMOLED display with 480 x 480 px resolution and 16.7M colors, equipped with a capacitive touch panel. AMOLED technology provides high contrast, wide viewing angles and fast response time. The display is driven via QSPI interface with CO5300 controller, while the touch panel uses the CST9220 chip.
The design also includes a 6-axis IMU module, RTC, audio codec and dual microphones with noise reduction and echo cancellation, enabling voice recognition systems and interactive applications. The MX1.25 connector allows connection of a 3.7 V Li-Ion battery (not included) with charging and power management handled by the AXP2101 chip.
Wireless connectivity includes 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 LE. Programming is performed via USB Type-C port, with support for ESP-IDF and Arduino environments.
- ESP32-S3R8 - Wi-Fi and Bluetooth SoC, up to 240MHz operating frequency, with built-in 8MB PSRAM
- 16MB NOR Flash
- AXP2101 - highly integrated power management chip
- Onboard antenna - Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE)
- Type-C port - ESP32-S3 USB port for programming and log printing
- MX1.25 Lithium Batt header - MX1.25 2PIN connector, for 3.7V Lithium Batt, supports charging and discharging
- IPEX 1 antenna connector - enabled via resoldering an onboard resistor
- TF card slot
- Dual microphones design - with onboard echo cancellation circuit, enabling higher-quality audio capture
- GPIO 18 button - supports custom button
- PWR button - for system power supply ON/OFF, supports custom function
- BOOT button - for device startup and function debugging
- QMI8658 - 6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer
- 2.16inch display panel connector
Features
- Microcontroller: ESP32-S3R8 (Xtensa LX7)
- Architecture: Dual-core 32-bit
- Clock frequency: Up to 240 MHz
- SRAM: 512 kB
- ROM: 384 kB
- PSRAM: 8 MB
- Flash memory: 16 MB
- Display: 2.16" AMOLED touch
- Resolution: 480 x 480 px
- Colors: 16.7M
- Brightness: 600 cd/m²
- Contrast ratio: 100000:1
- Display driver: CO5300
- Display interface: QSPI
- Touch controller: CST9220
- Touch type: Capacitive
- Wireless connectivity: Wi-Fi 2.4 GHz, Bluetooth 5 LE
- Antenna: Built-in
- USB interface: USB Type-C
- Memory card slot: TF (microSD)
- IMU: QMI8658 (3-axis accelerometer + 3-axis gyroscope)
- Microphone: Dual with noise reduction and echo cancellation
- Audio codec: Built-in
- Battery connector: MX1.25 3.7 V Li-Ion
- Power management: AXP2101, battery charge and discharge support
- RTC: Built-in
- Buttons: PWR, BOOT, GPIO
- Supported environments: ESP-IDF, Arduino
- Dimensions: 46 x 46 x 22.5 mm
- Weight: 0.031 kg
Kit includes
- ESP32-S3-Touch-AMOLED-2.16 development board
- PC insulating sheet
1204847
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
ESP32-S3-ePaper-1.54 is a compact and energy-efficient development board with an e-paper display, wireless communication and audio features. Designed for portable applications, voice interfaces and information devices, it serves as a universal development platform for IoT projects.
zł84.53
24h
Available quantity: 9
Available
ESP32-S3-DualEye-Touch-LCD-1.28 is a functional AIoT board with two touch displays, Wi-Fi, Bluetooth and voice support. Thanks to the combination of touch control, audio processing and graphic capabilities, it is perfectly suited for building modern user interfaces, robotics, wearable devices and smart home applications.
zł145.40
24h
Available quantity: 3
Available
ESP32-S3-DualEye-LCD-1.28 is a versatile AIoT board with two IPS displays, audio, Wi-Fi/Bluetooth and rich expansion options. Designed for HMI projects, voice control, wearable devices and smart embedded systems, with the ability to expand and adapt to advanced applications.
zł88.60
6 weeks
No product available!
ESP32-H2-Zero-M is a ready-to-use board with pre-soldered connectors, equipped with the ESP32-H2FH4S microcontroller and support for BLE, Zigbee and Thread. Designed for rapid prototyping in wireless communication systems, automation and IoT devices.
zł19.31
6 weeks
No product available!
ESP32-H2-Zero is a miniature development board with the ESP32-H2FH4S microcontroller, offering support for BLE 5, Zigbee and Thread, intended for IoT applications and wireless communication in compact embedded systems. Thanks to extensive peripherals and support for ESP-IDF and Arduino, it is a universal tool for rapid prototyping and application deployment.
zł18.17
24h
Available quantity: 28
Available
ESP32-S3-AUDIO-Board is a versatile development board with support for voice processing, AI and wireless communication, designed for smart speakers, HMI and IoT applications. Equipped with microphones, audio output, RGB lighting and interfaces for displays and cameras, it provides a comprehensive platform for creating modern devices with voice interaction.
zł75.87
6 weeks
No product available!
ESP32-S3-AUDIO-Board development board with two microphones and RGB lighting (battery included) -...
ESP32-S3-AUDIO-Board is a versatile development board with support for voice processing, AI and wireless communication, designed for smart speakers, HMI and IoT applications. Equipped with microphones, audio output, RGB lighting and interfaces for displays and cameras, it provides a comprehensive platform for creating modern devices with voice interaction.
zł83.09
24h
Available quantity: 7
Available
DFRobot FireBeetle 2 ESP32-C5 is a development board featuring Wi-Fi 6 and support for Zigbee, Thread, and Bluetooth 5, equipped with solar charging and power-efficient management functions. Designed for IoT projects, Home Assistant systems, and battery-powered devices, it combines high performance with communication flexibility.
zł44.08
24h
Available quantity: 13
Available
ESP-PROG-2 is a compact tool enabling convenient programming and debugging of ESP systems via UART and JTAG. Thanks to wide compatibility and selectable power supply voltage, it is suitable for working with various development boards, facilitating development and testing of applications in the ESP-IDF environment.
zł87.00
24h
Available quantity: 13
Available
M5Stack AtomS3R-AI Chatbot is a compact and efficient kit for developing voice assistants and projects in the field of AIoT and speech recognition. Thanks to the ESP32-S3, support for various development platforms and a ready-to-use audio base, it is ideal for smart devices, voice interfaces and next-generation IoT applications.
zł124.57
24h
Available quantity: 5
Available
The ESP32-P4-EYE module enables the creation of wireless real-time image and audio processing systems. Its integrated camera, microphone, display, and wireless communication make it a versatile solution for projects in the fields of surveillance, machine vision, and edge AI. Espressif Systems ESP32-P4-EYE
zł199.90
24h
Available quantity: 4
Available
A communication interface for the 2-wire eBUS bus, designed for integrating heating, ventilation, and building automation systems. Based on the ESP32-C6 chip, the module offers Wi-Fi connectivity, full galvanic isolation, and compliance with eBUS Class 0, preventing it from drawing power directly from the bus. The device works with eBUSD and micro-eBUSD software, enabling advanced control and monitoring of heating systems. eBUS Adapter Shield C6
zł199.00
4 weeks
No product available!
This development kit features the ESP32-C3-MINI-1 module and a 1.28-inch 240x240 color LCD display with a GC9A01 controller. It allows you to create interactive projects using a rotary encoder, built-in speaker, and infrared transmitter and receiver. The kit supports the LVGL library for building graphical user interfaces and wireless Wi-Fi and Bluetooth connectivity.
zł109.37
24h
Available quantity: 2
Available
Crowtail – ESP8266 NodeMCU 2.0 is a universal WiFi module for IoT projects with a ready Crowtail interface, microUSB port, and Li-Po battery charging function. It works well in mobile and stationary applications based on Arduino IDE or NodeMCU Lua.
zł45.15
24h
Available quantity: 4
Available
A compact ESP32-S3-based LoRa transceiver offering stable field communication without the need for a cellular network. The device comes pre-installed with Meshtastic, a 1.3" OLED display, and an SX1262 transceiver supporting the EU868 MHz band. A built-in 1000 mAh battery ensures long battery life, while Bluetooth and USB-C support simplify setup and everyday use. The Elecrow ThinkNode M2 Walkie-Talkie Mini
zł228.99
24h
Available quantity: 2
Available
This compact development board features Wi-Fi 6, Bluetooth 5 LE, and 802.15.4, ideal for Zigbee and Matter-based IoT projects. It offers numerous GPIOs, onboard LiPo charging, and battery monitoring thanks to the MAX17048 chip. It includes a NeoPixel LED and a STEMMA QT port for quick sensor connection. Its energy-efficient design, with a deep sleep mode of approximately 17µA, is ideal for battery-powered applications. Adafruit 5933
zł75.99
24h
Available quantity: 4
Available
Development board with ESP32-S3, 2.16" AMOLED touch display 480 x 480 px, 2.4 GHz Wi-Fi, BLE 5, dual microphones. No 3.7 V battery included. Waveshare ESP32-S3-Touch-AMOLED-2.16-EN