ESP32-S3 development board with 1.9″ display 170x320 - Waveshare 30995

Development board with WiFi / Bluetooth Espressif ESP32-WROVER module. The board is equipped with numerous peripheral systems, eg SD card slot, audio codec, a series of LEDs controlled by one line and a 9-axis IMU system. TTGO TAudio V1.5 ESP32-WROVER

Advanced development board equipped with a 2.8-inch 240x320 pixel LCD display and 5-point touch control, making it ideal for IoT and HMI applications. With a dual-core 240MHz ESP32-S3 processor, 16MB Flash and 8MB PSRAM, the board supports advanced applications and real-time interactions. Additionally, built-in Wi-Fi, Bluetooth 5.0, a 6-axis sensor, a micro SD slot and battery power make the device versatile and ideal for mobile projects. Waveshare ESP32-S3-Touch-LCD-2.8

Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter. Totem TE-X4-KIT2

Development board with WiFi and Bluetooth ESP32 module. It is equipped with an IPS 1.14" LCD display, a USB-UART converter and a Li-Ion battery charging system. ModESPttgo1.14"

Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993069

ESP32-S3-DevKitC-1U-N8R8 board with Wi-Fi, BLE, 8 MB flash, and 8 MB PSRAM for IoT projects and AI applications. Espressif ESP32-S3-DevKitC-1U-N8R8

ESP32-S3-LCD-1.69 is a versatile development board for IoT projects, portable applications, and user interfaces. Its integrated display, wireless communication, motion sensors, and advanced power options make it an excellent platform for rapid prototyping and deployment of smart solutions using the ESP32-S3.

The kit is equipped with a module with a Himax WiseEye2 HX6538 processor, a XIAO ESP32C3 module and an OV5647 camera. It enables efficient AI processing thanks to the support of the TensorFlow and PyTorch frameworks and ready-made models such as Yolo v5 and v8. Thanks to the simplicity of integration with the XIAO, Arduino and Raspberry Pi platforms and support for tinyML applications, it is perfect for IoT projects, industrial automation and smart cities. Seeed Studio E23011220

Espressif ESP32-C6 WiFi module board with RISC-V core. It offers 4 MB Flash and 512 KB SRAM and RGB diode. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C6-Zero

ESP32‑S3‑Touch‑LCD‑7 is a comprehensive solution for developing HMI panels, automation systems, industrial controllers, and IoT applications with a graphical interface. Its large touchscreen display, wireless connectivity, and extensive peripheral interfaces enable flexible and rapid deployment of projects requiring visualization and interaction with the environment.

Development board based on the ESP32-C3-MINI-1 module. It offers the ability to connect via WiFi, Bluetooth version 5 and Bluetooth Mesh. It is equipped with sensors, such as the SHTC3 temperature and humidity sensor or the IMU 6 DoF ICM-42670-P sensor. Espressif Systems ESP32-C3-DevKit-RUST-1

Development board based on Bluetooth Low Energy and IEEE 802.15.4 ESP32-H2-MINI-1 module. The ESP32-H2-MINI-1 integrates a 2.4GHz transceiver compliant with Bluetooth Low Energy and IEEE 802.15.4 technologies, supporting Bluetooth 5 (LE), Bluetooth Mesh, Thread, Matter, and Zigbee. Espressif Systems ESP32-H2-DevKitM-1-N4

Development kit based on the ESP-WROOM-32 module, equipped with a dual-core 32-bit Tensilica LX6 microcontroller (up to 240 MHz), offers 2.4GHz WiFi and Bluetooth connectivity. Thanks to numerous interfaces (GPIO, SPI, I2C, UART), it is perfect for IoT projects, smart homes and remote control systems.

The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8-M

ESP32-S3-Touch-AMOLED-1.8-EN is a high-performance, compact module with an AMOLED display and capacitive touch, designed for creating modern user interfaces in wearable devices, portable data acquisition systems, IoT controllers, and solutions with gesture and voice interaction. Thanks to advanced power management and rich peripheral features, it is well-suited for projects requiring independent power supply and high integration.

ESP32-S3-Touch-AMOLED-2.41-B is a high-performance module with an AMOLED display and touch panel, enclosed in a protective housing. Thanks to its rich peripheral resources and wireless connectivity, it is well suited for HMI projects, interactive devices, and IoT systems that require high-quality display and responsive touch control.