.png)
ESP32-C6 development board with 1.9″ display 170×320 - Waveshare 30937
ID: 1197749
5902186307599
zł72.20
Tax included
zł58.70 tax excl.
ESP32-C6-LCD-1.9 is a compact and energy-efficient development board with a 1.9" color LCD display, support for Wi-Fi 6 and Bluetooth 5, designed for HMI projects, mobile systems, and IoT devices. The version without a touch panel allows for rapid implementation of graphical user interfaces while maintaining a simplified hardware design. Thanks to full compatibility with the Raspberry Pi Pico pinout, it enables easy expansion with additional modules and functions.
Description
Development board with the ESP32-C6FH8 microcontroller featuring a single-core 32-bit RISC-V processor running up to 160 MHz and 8 MB of Flash memory. The integrated 1.9" LCD display with a resolution of 170×320 pixels is based on the ST7789V2 controller and supports 90° hardware image rotation. Version without a touch panel. Supports wireless communication via Wi-Fi 6 (802.11 ax/b/g/n) and Bluetooth 5 (LE and Mesh). The compact design also includes a 6-axis QMI8658 IMU sensor, TF card slot, 3.7 V lithium battery connector, and USB Type-C port.
The board is compatible with the Raspberry Pi Pico pin layout, enabling easy integration with existing extensions. Support for ESP-IDF and Arduino IDE environments and access to SDKs and examples make it easy to get started with the platform.
Features
- ESP32-C6FH8 microcontroller with single-core 32-bit RISC-V processor, up to 160 MHz
- Flash memory: 8 MB
- Supports Wi-Fi 6 (802.11 ax/b/g/n, 2.4 GHz), Bluetooth 5 (LE and Mesh)
- 1.9" LCD display, 170×320 px, 262K colors, brightness 500 cd/m², contrast 900:1
- Display controller: ST7789V2, SPI interface
- No touch panel (non-touch version)
- QMI8658 sensor – 6-axis IMU (accelerometer and gyroscope)
- USB Type-C port for power, programming, and debugging
- TF card slot for data or graphics storage
- MX1.25 connector for 3.7 V lithium battery (charging/discharging)
- Integrated ceramic Wi-Fi antenna
- IPEX1 connector available only in the touch version
- WS2812 RGB LEDs (only in the non-touch version)
- Compatible with Raspberry Pi Pico pinout
1197749
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993068
zł229.22
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993069
zł407.82
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993070
zł266.01
4 weeks
No product available!
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices using a rich set of GPIOs. Seeed Studio 114993071
zł415.00
24h
Available quantity: 1
Available
Board with WiFi and BLE Espressif ESP32-S3 module and OV3660 camera and digital microphone. It offers 8 MB Flash memory and 8 MB PSRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991115
zł91.24
24h
Available quantity: 87
Available
An Ethernet-Wi-Fi development board that allows you to connect Ethernet devices via Wi-Fi. It consists of two development boards: Ethernet (A) and PoE (B). The Ethernet (A) includes the ESP32-WROVER-E Bluetooth/Wi-Fi module and IP101GRI, and the PoE module (B) provides the power over Ethernet function.
zł339.01
24h
Available quantity: 1
Available
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700
zł70.34
24h
Available quantity: 2
Available
Waterproof controller with ESP32 module in an industrial-grade housing designed for demanding applications. It uses the Espressif ESP32 chip with the Xtensa® 32-bit LX6 core and a built-in Wi-Fi module. It is equipped with a 2-inch IPS display with a touch panel. M5stack K034
zł266.00
24h
Available quantity: 1
Available
A set for testing ambient temperature and humidity as well as air quality. It is a combination of the M5Stack Basic host module, the SHT30 temperature and humidity sensor and the PMSA003 digital universal particle concentration sensor. M5Stack K023-b
zł355.80
24h
Available quantity: 1
Available
Development kit from the M5Stack series equipped with the ESP32-S3 module. It will work well in projects related to IoT or in "wearable" devices. M5 Stack C124
zł47.90
1 weeks
No product available!
Development board based on the ESP32-C3-MINI-1 module. It offers the ability to connect via WiFi, Bluetooth version 5 and Bluetooth Mesh. It is equipped with sensors, such as the SHTC3 temperature and humidity sensor or the IMU 6 DoF ICM-42670-P sensor. Espressif Systems ESP32-C3-DevKit-RUST-1
zł123.06
24h
Available quantity: 1
Available
Development board with Espressif ESP32-S3-WROOM-1 module. The module has built-in 8 MB Flash memory and 8 MB PSRAM and offers WiFi and Bluetooth LE wireless communication. Espressif Systems ESP32-S3-DevKitC-1-N8R8
zł89.91
24h
Available quantity: 3
Available
Development board with ESP32-S3-WROOM-1U module, featuring Wi-Fi 2.4 GHz, Bluetooth LE, 8 MB Flash, 8 MB PSRAM and an IPEX connector for an external antenna. Espressif ESP32-S3-DevKitC-1U-N8R8
zł89.90
24h
Available quantity: 6
Available
Espressif ESP32-S3 WiFi module board with 32-bit dual-core Xtensa 32-bit LX7 processor. It offers 4 MB Flash memory and 512 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-S3-Zero
zł24.48
4 weeks
No product available!
Espressif ESP32-C3FH4 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 400 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C3-Zero
zł20.50
4 weeks
No product available!
Espressif ESP32-S3 WiFi module board with 32-bit dual-core Xtensa 32-bit LX7 processor. It offers 4 MB Flash memory and 512 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-S3-Zero-M
zł27.98
4 weeks
No product available!
ESP32-C6-LCD-1.9 is a compact and energy-efficient development board with a 1.9" color LCD display, support for Wi-Fi 6 and Bluetooth 5, designed for HMI projects, mobile systems, and IoT devices. The version without a touch panel allows for rapid implementation of graphical user interfaces while maintaining a simplified hardware design. Thanks to full compatibility with the Raspberry Pi Pico pinout, it enables easy expansion with additional modules and functions.