zł39.46 tax excl.
Development board based on the ESP32-C3FH4 with a 1.47-inch IPS LCD featuring 172 × 320px resolution, 2.4GHz Wi-Fi, Bluetooth 5 LE and a QMI8658 6-axis IMU. Standard version supplied with separate unsoldered pin headers and also equipped with a TF card slot, USB-C and 15 broken-out GPIOs. Waveshare ESP32-C3-LCD-1.47
The device Waveshare ESP32-C3-LCD-1.47 uses the ESP32-C3FH4 microcontroller with a 32-bit single-core RISC-V processor running at up to 160MHz. The controller provides 400KB SRAM, 384KB ROM and 4MB Flash memory. Wireless connectivity includes 2.4GHz IEEE 802.11 b/g/n Wi-Fi and Bluetooth 5 LE, while the onboard ceramic antenna supports integration into IoT devices, embedded systems and compact user interfaces.

The onboard 1.47-inch IPS LCD provides a 172 × 320px resolution and supports 262K colors. The display uses the ST7789 controller and does not include a touch panel. It can be used for status displays, compact HMI interfaces, measurement devices and GUI applications, including projects based on the LVGL library.
The board also integrates a QMI8658 6-axis IMU with a 3-axis accelerometer and 3-axis gyroscope, a TF / microSD card slot, CH32V003F4U6 I/O expander, MP1605GTF-Z power supply circuit and BOOT and RESET buttons. A total of 15 GPIOs are broken out, with interfaces including 3 × SPI, 1 × I2C, 2 × UART, 1 × I2S and 2 × ADC. The USB Type-C port is used for power, programming and debugging. Waveshare 34663 is supplied with two black pin headers included separately and not factory soldered to the board.
Manufacturer
Responsible person
Development board based on the ESP32-C3FH4 with a 1.47-inch 172 × 320px LCD, 2.4GHz Wi-Fi, Bluetooth 5 LE and a QMI8658 6-axis IMU. Version with factory pre-soldered black pin headers, also featuring a TF card slot, USB-C and 15 broken-out GPIOs. Waveshare ESP32-C3-LCD-1.47-M
Waveshare RGB matrix driver board with a HUB75 interface, based on the ESP32-S3-N32R16 module with a dual-core 240MHz Xtensa LX7 processor, 32MB Flash and 16MB PSRAM. The board integrates 2.4GHz WiFi, Bluetooth 5 LE, dual microphones, audio circuitry, a 6-axis IMU, temperature and humidity sensor, RTC and TF card slot for LED matrix interfaces and voice-enabled applications. Waveshare ESP32-S3-RGB-Matrix
No product available!
An HMI panel with a powerful ESP32-P4 chip and an additional ESP32-C6 module, offering Wi-Fi 6 and Bluetooth 5.3 connectivity for IoT, automation, and AIoT applications. The device features a 10.1-inch IPS screen with a resolution of 1024 × 600 pixels and a capacitive touch panel supporting up to 5 touch points, ensuring convenient and smooth interface operation. With 32 MB of PSRAM, 16 MB of Flash, and support for LVGL, Arduino IDE, and ESP-IDF, the panel enables the creation of complex graphical applications and control systems. Elecrow DHE04310D
No product available!
Development module equipped with two ESP32-S3 microcontrollers, designed for developing USB HID devices that communicate with computers, USB mice, and keyboards. The board features three USB ports, multiple communication and debugging interfaces, and supports the ESP-IDF development framework. MAKCU ESP32-S3
Matter, Thread and Zigbee gateway based on the ESP32-S3 controller and ESP32-H2 module, designed for integrating IoT devices operating in the IEEE 802.15.4 standard. The device features a 2" IPS touch display, camera, motion sensors, USB OTG interface and two HY2.0-4P expansion connectors. Designed for DIN rail mounting, the platform supports Matter, Thread and Zigbee protocols, making it suitable for smart home systems, building automation and sensor network applications. M5Stack K149
Development kit with the ESP32-PICO-V3-ZERO module featuring 2.4 GHz WiFi and Bluetooth LE for designing IoT devices and wireless applications. The board offers Arduino Zero pin compatibility, a built-in USB-to-UART bridge, a PCB antenna, and support for the Amazon Alexa Connect Kit (ACK) platform. Espressif Systems ESP32-PICO-V3-ZERO-DEVKIT
CrowPanel Advance HMI module with an ESP32-S3 microcontroller, a 7" 800 × 480px IPS display and capacitive touchscreen. Equipped with 16MB Flash, 8MB PSRAM, 2.4GHz Wi-Fi, Bluetooth 5 LE, an onboard microphone, RTC, microSD card slot and UART and I2C interfaces. Supports LVGL, Arduino IDE, ESP-IDF and PlatformIO, with wireless connectivity expansion through a replaceable communication module. Version without an acrylic enclosure. Elecrow DIS02170A-1
CrowPanel HMI module with an ESP32-S3 microcontroller, a 7" 800 × 480px TN TFT display and capacitive touchscreen. Equipped with 4MB Flash, 8MB PSRAM, 2.4GHz Wi-Fi, Bluetooth 5 LE, a microSD card slot and UART, I2C and GPIO interfaces. Supports Arduino IDE, ESP-IDF, PlatformIO, MicroPython and the LVGL graphics library. Version without an acrylic enclosure. Elecrow DIS08070H-1
CrowPanel HMI module with an ESP32-S3 microcontroller, a 4.3" 480 × 272px TN TFT display and resistive touchscreen. Equipped with 4MB Flash, 2MB PSRAM, 2.4GHz Wi-Fi, Bluetooth 5 LE, a microSD card slot and UART and GPIO interfaces. Supports Arduino IDE, ESP-IDF, PlatformIO, MicroPython and the LVGL graphics library. Version without an acrylic enclosure, with a touchscreen stylus included. Elecrow DIS06043H-1
Development board based on the ESP32-P4NRW32X microcontroller, featuring a dual-core RISC-V processor running at up to 400MHz and an additional low-power core operating at up to 40MHz. Equipped with 32MB PSRAM, 32MB NOR Flash, MIPI-CSI and MIPI-DSI interfaces, USB 2.0 OTG High Speed, and GPIO expansion headers. Supports hardware image processing and H.264 encoding. Supplied with two factory-soldered 20-pin headers. Waveshare ESP32-P4-Core-DEV-KIT-M
No product available!
Development board based on the ESP32-P4NRW32X microcontroller, featuring a dual-core RISC-V processor running at up to 400MHz and an additional low-power core operating at up to 40MHz. Equipped with 32MB PSRAM, 32MB NOR Flash, MIPI-CSI and MIPI-DSI interfaces, USB 2.0 OTG High Speed, and GPIO expansion connections. Supports hardware image processing and H.264 encoding. Supplied without pre-soldered headers, with two separate 20-pin headers included. Waveshare ESP32-P4-Core-DEV-KIT
No product available!
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and capacitive touch panel. Supports Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4 and integrates a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot and USB-C. EN variant. Waveshare ESP32-C6-Touch-LCD-1.54-EN
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and capacitive touch panel. Supports Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4 and integrates a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot and USB-C. Variant supplied with a 3.7V battery. Waveshare ESP32-C6-Touch-LCD-1.54
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and support for Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4. Features a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot, USB-C and 3.7V battery interface; non-touch EN variant. Waveshare ESP32-C6-LCD-1.54-EN
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and support for Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4. Features a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot, USB-C and 3.7V battery support; non-touch version supplied with a 1000mAh battery. Waveshare ESP32-C6-LCD-1.54
Development board based on the ESP32-C3FH4 with a 1.47-inch 172 × 320px LCD, 2.4GHz Wi-Fi, Bluetooth 5 LE and a QMI8658 6-axis IMU. Version with factory pre-soldered black pin headers, also featuring a TF card slot, USB-C and 15 broken-out GPIOs. Waveshare ESP32-C3-LCD-1.47-M
Development board based on the ESP32-C3FH4 with a 1.47-inch IPS LCD featuring 172 × 320px resolution, 2.4GHz Wi-Fi, Bluetooth 5 LE and a QMI8658 6-axis IMU. Standard version supplied with separate unsoldered pin headers and also equipped with a TF card slot, USB-C and 15 broken-out GPIOs. Waveshare ESP32-C3-LCD-1.47
Development board based on the ESP32-C3FH4 with a 1.47-inch IPS LCD featuring 172 × 320px resolution, 2.4GHz Wi-Fi, Bluetooth 5 LE and a QMI8658 6-axis IMU. Standard version supplied with separate unsoldered pin headers and also equipped with a TF card slot, USB-C and 15 broken-out GPIOs. Waveshare ESP32-C3-LCD-1.47