- New
zł71.79 tax excl.
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and capacitive touch panel. Supports Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4 and integrates a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot and USB-C. Variant supplied with a 3.7V battery. Waveshare ESP32-C6-Touch-LCD-1.54
The device Waveshare ESP32-C6-Touch-LCD-1.54 uses the ESP32-C6 microcontroller with a 32-bit single-core RISC-V processor running at up to 160MHz. The controller provides 512KB SRAM, 320KB ROM and 16MB Flash memory. Wireless connectivity includes 2.4GHz Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4, supporting projects based on protocols including Zigbee 3.0 and Thread.
The onboard 1.54-inch IPS LCD provides a 240 × 240px resolution and supports 262K colors. The ST7789 display controller communicates through a 4-wire SPI interface, while the capacitive touch panel uses the CST816 controller. The active display area measures 27.72 × 27.72mm. The display and touch interface can be used for compact HMI systems, control terminals, IoT devices and graphical applications.
The module also integrates a QMI8658 6-axis IMU, dual microphones, an ES7210 audio capture IC, ES8311 codec, NS4150B amplifier and onboard speaker. The hardware provides a platform for audio recording and playback, noise reduction, echo cancellation, voice functions and applications responding to device motion and orientation. A TF / microSD card slot provides additional storage for data and multimedia files.
The USB Type-C port is used for programming and communication, while I2C and UART interfaces allow external devices to be connected. The module also includes programmable function buttons and an MX1.25 2PIN connector for a 3.7V lithium battery with charging and discharging support. Waveshare 34659 is supplied with a 3.7V battery. The manufacturer's factory firmware includes functions such as AI conversation, audio playback, photo album, text reading and a motion-controlled gravity ball game.
Processor and memory
Wireless connectivity
Display and touch
Sensors and audio
Interfaces and power
Manufacturer
Responsible person
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and capacitive touch panel. Supports Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4 and integrates a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot and USB-C. EN variant. Waveshare ESP32-C6-Touch-LCD-1.54-EN
No product available!
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and support for Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4. Features a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot, USB-C and 3.7V battery interface; non-touch EN variant. Waveshare ESP32-C6-LCD-1.54-EN
No product available!
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and support for Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4. Features a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot, USB-C and 3.7V battery support; non-touch version supplied with a 1000mAh battery. Waveshare ESP32-C6-LCD-1.54
No product available!
A small USB-UART TTL converter module based on the CH340 system with a USB type A connector. Designed for the ESP-01 and ESP-01S modules
A small DIP adapter with a 2.54 mm goldpin connector. Designed for the ESP-01 and ESP-01S modules
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-17381
No product available!
LILYGO T8-S3 V1.2 development board featuring a dual-core ESP32-S3 microcontroller running at 240 MHz, 16 MB Flash memory and 8 MB PSRAM. Supports 2.4 GHz WiFi and Bluetooth 5.0 LE, and includes a microSD card slot, USB Type-C connector, GPIO pins, WiFi antenna and 3.7 V Li-Po battery connector. LILYGO T8-S3 [H669]
No product available!
Development board with WiFi and Bluetooth ESP32 module. It is equipped with an IPS 1.14" LCD display, a USB-UART converter and a Li-Ion battery charging system. LilyGo T-Display ESP32 4MB
Module with 9-axis IMU LSM9DS1 system dedicated to ESP Thing board. Equipped with a connector for connecting GPS and a microSD slot. SparkFun DEV-14430
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1
No product available!
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter. Totem TE-X4-KIT2
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter and Li-Ion battery. Totem TE-X4-KIT3
Module with WiFi Espressif ESP32-S2 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, SPI, UART, I2S and I2C. SparkFun WRL-15663
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFRobot DFR0654
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F
Development board with ESP-WROOM-32 module. It allows communication within the WiFi network and the Bluetooth 4.2 (BLE) standard
Module with ATSAMD51J19 microcontroller and ESP32 WiFi system dedicated to matrix displays with HUB75 interface. Adafruit 4745
Module with WiFi Espressif ESP32-S2. It integrates two regulators, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4775
Development board with WiFi ESP32-S2 module and 1.54" TFT LCD display. Equipped with a pressure, temperature and humidity sensor. Dedicated to build a home automation system. Adafruit 4985
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and capacitive touch panel. Supports Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4 and integrates a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot and USB-C. Variant supplied with a 3.7V battery. Waveshare ESP32-C6-Touch-LCD-1.54