zł63.41 tax excl.
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and support for Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4. Features a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot, USB-C and 3.7V battery support; non-touch version supplied with a 1000mAh battery. Waveshare ESP32-C6-LCD-1.54
The device Waveshare ESP32-C6-LCD-1.54 uses the ESP32-C6 microcontroller with a 32-bit single-core RISC-V processor running at up to 160MHz. The controller provides 512KB SRAM, 320KB ROM and 16MB Flash memory. Wireless connectivity includes 2.4GHz Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4, allowing the module to be used in projects based on protocols including Zigbee 3.0 and Thread.

The onboard 1.54-inch IPS LCD provides a 240 × 240px resolution and supports 262K colors. The display uses the ST7789 controller and communicates through a 4-wire SPI interface. Waveshare 34658 does not include a touch panel. The display can be used for status screens, HMI interfaces, IoT devices and compact graphical applications.
The module also integrates a QMI8658 6-axis IMU with a 3-axis accelerometer and 3-axis gyroscope, dual microphones, ES7210 and ES8311 audio ICs, an NS4150B amplifier and a speaker. The hardware configuration supports projects involving audio capture and playback, voice-based interaction and applications responding to device motion and orientation.
Additional hardware includes a TF / microSD card slot, PLUS, PWR and BOOT buttons, an onboard antenna and a USB Type-C port for programming and communication. I2C and UART interfaces are provided for connecting external devices. The MX1.25 2PIN connector supports a 3.7V lithium battery together with charging and discharging functions. Waveshare 34658 is supplied with a 3.7V 1000mAh battery designed for installation inside the enclosure.
Manufacturer
Responsible person
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and capacitive touch panel. Supports Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4 and integrates a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot and USB-C. EN variant. Waveshare ESP32-C6-Touch-LCD-1.54-EN
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and capacitive touch panel. Supports Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4 and integrates a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot and USB-C. Variant supplied with a 3.7V battery. Waveshare ESP32-C6-Touch-LCD-1.54
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and support for Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4. Features a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot, USB-C and 3.7V battery interface; non-touch EN variant. Waveshare ESP32-C6-LCD-1.54-EN
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F
Development board with ESP-WROOM-32 module. It allows communication within the WiFi network and the Bluetooth 4.2 (BLE) standard
Module with ATSAMD51J19 microcontroller and ESP32 WiFi system dedicated to matrix displays with HUB75 interface. Adafruit 4745
Module with WiFi Espressif ESP32-S2. It integrates two regulators, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4775
Development board with WiFi ESP32-S2 module and 1.54" TFT LCD display. Equipped with a pressure, temperature and humidity sensor. Dedicated to build a home automation system. Adafruit 4985
Adapter for ESP8266 modules dedicated to control addressable RGB LEDs from the WS2812 series
Powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32E 32MBit (4MB)
Function module designed for MicroMod boards. It allows you to add WiFi wireless communication based on the ESP32 chip to the project. SparkFun WRL-18430
Development board with WiFi and Bluetooth ESP32 module. It has been equipped with industrial interfaces RS485 and CAN. TTGO T-CAN485 ESP32
No product available!
Board with WiFi Espressif ESP32-S2 module and 0.96" LCD display. It offers 4 MB Flash memory and 8 MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-LCD-0.96
Board with WiFi Espressif ESP32-S2 module and 0.96" LCD display. It offers 4 MB Flash memory and 8 MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-LCD-0.96-M
Board with the WiFi Espressif ESP32-S2 module. Offers 4MB Flash and 8MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare 21178
Board with the WiFi ESP-12F (ESP8266) module and a 5 V relay. Equipped with an AC adapter
Board with the WiFi Espressif ESP32-S2 module. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5325
Module with WiFi Espressif ESP32-S2. It integrates the TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5300
Board with WiFi Espressif ESP32-S2 module and u.FL connector. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5348
No product available!
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and support for Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4. Features a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot, USB-C and 3.7V battery support; non-touch version supplied with a 1000mAh battery. Waveshare ESP32-C6-LCD-1.54