

zł28.58 tax excl.
ESP32-C6-DEV-KIT-N16 is a versatile development board with support for Wi-Fi 6, Bluetooth 5, and Zigbee/Thread, based on the ESP32-C6 microcontroller with 16 MB of Flash memory. The version without soldered pin headers allows flexible integration in projects with non-standard mounting requirements, while still providing full functionality and a rich set of interfaces for IoT applications, automation, and embedded systems.
Development board with the ESP32-C6-WROOM-1-NX microcontroller featuring a single-core 32-bit RISC-V processor clocked up to 160 MHz and built-in 16 MB Flash memory. Supports modern wireless communication standards including Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread). With integrated CH343 and CH334 chips, it allows simultaneous software development via USB and UART interfaces through a USB Type-C connector.
The pin layout is compatible with the ESP32-C6-DevKitC-1, facilitating project expansion using existing modules and extension boards. Available peripherals include SPI, UART, I2C, I2S, PWM LED, and SDIO. The edge-castellated design allows direct soldering to larger modules. This version comes without pre-soldered pin headers, enabling flexible use in projects with limited mounting space.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Development board with Espressif ESP32-S3-WROOM-1 module. The module has built-in 8 MB Flash memory and 8 MB PSRAM and offers WiFi and Bluetooth LE wireless communication. Espressif Systems ESP32-S3-DevKitC-1-N8R8
No product available!
Versatile ESP32 module with LoRa and Wi-Fi support, designed for monitoring people flow and creating mesh networks in difficult conditions, such as in areas cut off from the network. The device can detect Wi-Fi and Bluetooth signals, allowing estimation of the number of mobile devices in the environment without recording MAC addresses, which protects privacy. The module offers low power consumption, data storage on SD card and data transfer via LoRa WAN or MQTT, making it a reliable and self-sufficient solution for emergency communication. modTTGO LoRa32 v2.1
No product available!
Development board with WiFi / Bluetooth Espressif ESP32-WROVER module. The board is equipped with numerous peripheral systems, eg SD card slot, audio codec, a series of LEDs controlled by one line and a 9-axis IMU system. TTGO TAudio V1.5 ESP32-WROVER
No product available!
A board with an ESP32 module equipped with a 1.28-inch round display. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-LCD-1.28
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico-M
ESP32-C6-Touch-LCD-1.47 is a development board with a touch IPS display and ESP32-C6 chip, providing Wi-Fi 6, Bluetooth 5, and a rich set of peripherals. The standard version without pre-soldered pin headers allows flexible integration into IoT, HMI, and mobile applications.
Evaluation board with the ESP32-S2-SOLO-U-N4R2 module enables the development of 2.4 GHz wireless Wi-Fi applications, offering integrated Flash and PSRAM memory as well as the option to use an external antenna. Thanks to a wide range of interfaces and a high number of available GPIOs, it is suitable for IoT projects, building automation, remote control systems, as well as wearable devices and distributed measurement systems.
M5Stack series development kit equipped with ESP32 Pico. Equipped with a 5x5 RGB LED matrix, it will work in IoT-related projects or in "wearable" devices. M5Stack C008-B
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter. Totem TE-X4-KIT2
ESP32-S3-Touch-LCD-2.1B is a versatile development board featuring an IPS RGB touchscreen display with a circular touch panel, dedicated to HMI interfaces, IoT systems, control panels, and smart devices. It combines the performance of a dual-core processor with advanced communication capabilities and a wide range of peripheral interfaces, enabling rapid prototyping of modern visual and interactive applications.
No product available!
A set with a Doppler radar module and an XIAO ESP32C3 board designed for precise detection of human presence. It allows you to connect additional Grove sensors (analog or with an I2C interface) and expand the functionality. Seeed Studio 110061541
No product available!
Advanced ESP32-based communication module with Wi-Fi and Bluetooth 4.2 support, equipped with LoRa SX1276 chip for long-range transmission in the 868 MHz band. Integrated NEO-6M GPS module and 0.96" OLED display enable real-time location and data viewing, and built-in 18650 cell cage provides mobility and energy independence. T-Beam V1.2 is ideal for projects based on mesh networks, providing reliable connectivity in field and IoT applications. LILYGO TTGO Meshtastic T-Beam V1.2
No product available!
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. Uses the ESP32-C6-WROOM-1 module and two USB Type C connectors. ESP32-C6-DEVKITC-1-N8
Board with the WiFi Espressif ESP32-S2 module. Offers 4MB Flash and 8MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-Pico
ESP32-S3-Touch-LCD-4 is a versatile development board featuring a 4-inch touchscreen and the ESP32-S3 microcontroller, offering high processing power, wireless communication support, and a wide range of interfaces. The touch panel, LVGL-based GUI, multiple connectors, and support for various power sources make it an excellent solution for interactive and control applications in embedded systems and automation.
No product available!
Module with WiFi Espressif ESP32. It offers 8MB Flash, 2MB PSRAM, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5438
ESP32-C6-DEV-KIT-N16 is a versatile development board with support for Wi-Fi 6, Bluetooth 5, and Zigbee/Thread, based on the ESP32-C6 microcontroller with 16 MB of Flash memory. The version without soldered pin headers allows flexible integration in projects with non-standard mounting requirements, while still providing full functionality and a rich set of interfaces for IoT applications, automation, and embedded systems.