- -zł380.94
ESP32-S3-SIM7670G-4G-EN - development board with ESP32-S3 and SIM7670G module
ID: 1190056
5906623486823
zł615.87
zł234.93
Save zł380.94
Tax included
zł191.00 tax excl.
Lowest price 30 days:
zł615.87
The ESP32-S3 SIM7670G 4G development board combines the ESP32-S3R2 microcontroller with the SIM7670G module, offering global LTE Cat-1, Wi-Fi, Bluetooth, and GNSS connectivity for advanced IoT applications. With support for lithium batteries and solar panels, as well as a built-in OV2640 camera, the board is ideal for remote monitoring projects, smart homes, and low-power applications.. Waveshare ESP32-S3-SIM7670G-4G-EN
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The ESP32-S3 SIM7670G 4G development board is designed for IoT applications, combining high performance with global LTE Cat-1 connectivity, Wi-Fi, Bluetooth, and precise GNSS positioning. The module is based on the ESP32-S3R2, equipped with a dual-core Xtensa® 32-bit LX7 microcontroller running at up to 240 MHz, 512KB of SRAM, 2MB of PSRAM, and 16MB of Flash memory. With the integrated SIM7670G module, the board offers global support for LTE Cat-1, including 4G networks, and positioning technologies such as GPS, BeiDou, GLONASS, and Galileo.
| 1. ESP32-S3R2 | 17. Nano SIM card slot |
| 2. SIM7670G | 18. Solar panel input interface (5V/6V/9V/12V/18V) |
| 3. EA3036C | 19. Built-in antenna |
| 4. ETA6098 battery charging IC | 20. IPEX 1 WiFi antenna connector |
| 5. CN3791 solar energy charging IC | 21. IPEX 1 GNSS antenna connector |
| 6. MAX17048G battery voltage monitoring IC | 22. IPEX 1 LTE antenna connector |
| 7. CH343 (UART to USB IC) | 23. WS2812B LED |
| 8. CH334 (USB HUB) | 24. Power indicator |
| 9. W25Q128JVSIQ (16MB Flash) | 25. Reverse polarity battery indicator |
| 10. FSUSB42UMX (USB switching IC) | 26. Solar power input indicator |
| 11. TXB0104PWR (Voltage level translator) | 27. Network status indicator |
| 12. 24-pin camera interface (compatible with OV2640/OV5640) | 28. Solar panel voltage selection jumper (default 5V) |
| 13. MicroSD card slot | 29. SY8105IADC (DC-DC input converter) |
| 14. USB Type-C connector | 30. DIP switches (CAM, HUB, 4G, USB) |
| 15. RESET button | 31. ON/OFF power switch |
| 16. BOOT button | 32. 18650 battery holder |
The device is equipped with various features, including an integrated 2.4GHz Wi-Fi and Bluetooth Low Energy module, making it ideal for applications like 4G mobile hotspots, monitoring, smart homes, or projects requiring low power consumption. The board supports lithium battery charging through both USB and solar panels, making it a great option for powering devices in remote locations. It also includes an OV2640 camera, allowing for use in image recognition systems.
With a wide range of interfaces, such as USB, a microSD card slot, GPIO, and more, the board is versatile and easy to integrate into various IoT projects. Additionally, development resources and usage examples are provided, enabling a quick start for IoT projects, cloud server monitoring, or GPS tracking of devices or animals. The ESP32-S3 SIM7670G 4G is a complete solution for anyone looking for a reliable platform to deploy IoT applications in real-world environments.
Features
- ESP32-S3R2 with 32-bit dual-core Xtensa LX7 processor up to 240 MHz
- Built-in: 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB Flash
- Integrated 2.4GHz Wi-Fi and Bluetooth LE communication
- Frequency bands:
- LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66
- LTE-TDD: B34, B38, B39, B40, B41
- GNSS: GPS, BeiDou, GLONASS, Galileo
- Built-in OV2640 camera
- Powering methods: USB port, 18650 lithium battery holder (battery not included), 2.54 mm connector
- 5V (USB port / 5V connector)
- 3.7 to 4.2V (18650 lithium battery holder / VBAT connector)
- Logic level: 3.3V
- Dimensions: 125 x 31.6 x 34 mm
Kit contains
- ESP32-S3-SIM7670G-4G
- Clear acrylic case and screw set
- Ceramic GNSS antenna
- OV2640 camera
- 2P terminal block
- 40-pin yellow straight pin header
- 1m USB Type A to Type C cable
- FPC antenna
- Screwdriver
- 4 x double-sided tape
1190056
You might also like
Espressif ESP32-S3 WiFi and BLE module board. It offers 8 MB of flash memory and 8 MB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991114
zł40.07
24h
Available quantity: 26
Available
Board with WiFi and BLE Espressif ESP32-S3 module and OV2640 camera and digital microphone. It offers 8 MB Flash memory and 8 MB SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991115
zł73.71
24h
Available quantity: 103
Available
Other products in the same category (16)
M5Stack series development kit equipped with ESP32 Pico. It will work in IoT-related projects or in "wearable" devices. M5Stack C008
zł47.60
24h
Available quantity: 5
Available
Development board with WiFi and Bluetooth module Espressif ESP32-WROVER. It is equipped with a microSD card slot, a USB-UART converter and a Li-Ion battery charging system. TTGO T8 V1.1 ESP32
zł90.26
24h
Available quantity: 2
Available
Development kit with ESP32 module and LoRa communication. It is equipped with an integrated ESP32-C3 chip with a 32-bit RISC-V core processor and a Wio-E5 STM32WLE5JC module as a long-range controller that supports the LoRa protocol. Seeed Studio 114992985
zł220.69
Delivery date unknown
No product available!
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-17381
zł154.62
4 weeks
No product available!
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. Adafruit 5398
zł122.77
24h
Available quantity: 2
Available
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. Uses the ESP32-C6-WROOM-1 module and two USB Type C connectors. ESP32-C6-DEVKITC-1-N8
zł64.98
24h
Available quantity: 10
Available
Module with WiFi Espressif ESP32-S2. It has 4MB Flash, 2MB PSRAM, and integrates a BME280 sensor, LiPo charging circuit, and RGB LED. Equipped with a STEMMA QT connector. Adafruit 5303
zł149.90
24h
Available quantity: 2
Available
M5Stack series kit equipped with ESP32 and camera with OV2640 sensor. It has a built-in W5500 chip and can be powered by the RJ45 (PoE) connector. M5Stack U121
zł269.00
24h
Available quantity: 1
Available
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8
zł54.66
24h
Available quantity: 24
Available
ESP32-S3 development board equipped with a 32-bit dual-core Xtensa 32-bit LX7 processor. It is equipped with a 1.14-inch IPS LCD display with a resolution of 240 x 135 pixels and a micro SD card slot. It has the format of a USB dongle with a type A connector, which makes it convenient and handy to use. Waveshare ESP32-S3-GEEK
zł57.34
4 weeks
No product available!
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, the module has a built-in system for charging Li-Pol batteries. The plate has soldered goldpin connectors (female extension). Adafruit 3619
zł157.76
24h
Available quantity: 1
Available
Board with the WiFi Espressif ESP32-S3 module. It offers 8 MB of Flash memory and 512 KB of SRAM and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5426
zł66.42
24h
Available quantity: 4
Available
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. Equipped with a STEMMA QT connector. Adafruit 5401
zł173.04
24h
Available quantity: 1
Available
Board with WiFi Espressif ESP32-S2 module and 0.96" LCD display. It offers 4 MB Flash memory and 8 MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-LCD-0.96-M
zł70.48
24h
Available quantity: 5
Available
Set with Adafruit HUZZAH32 (ESP32) board and expansion module with 8 BME688 sensors (gas, pressure, temperature and humidity sensor). Bosch BME688 Gas Sensor Developer Kit
zł674.69
24h
Available quantity: 2
Available
Advanced module with a 32-bit, single-core RISC-V processor. It has a built-in Bluetooth LE 5 and IEEE 802.15.4 (Thread, Zigbee 3.0) module. Perfect solution for IoT (Internet of Things) projects. Version with connectors for selfassembly. Waveshare ESP32-H2-DEV-KIT-N4
zł30.02
24h
Available quantity: 9
Available
The ESP32-S3 SIM7670G 4G development board combines the ESP32-S3R2 microcontroller with the SIM7670G module, offering global LTE Cat-1, Wi-Fi, Bluetooth, and GNSS connectivity for advanced IoT applications. With support for lithium batteries and solar panels, as well as a built-in OV2640 camera, the board is ideal for remote monitoring projects, smart homes, and low-power applications.. Waveshare ESP32-S3-SIM7670G-4G-EN