IoT Wi-Fi / BT development board with ESP32 chip and 0.96 "OLED display
ID: 570606
5906623456383
zł35.72
Tax included
zł29.04 tax excl.
A board with a built-in ESP-WROOM-32 module and an 0.96 "OLED display (SSD1306) with a resolution of 128x64. The ESP32 system enables communication of WiFi 2.4 GHz and Bluetooth BLE v4.2 networks. modESP32_OLED
Description
The board with the built-in ESP-WROOM-32 module and the 0.96 "OLED display (SSD1306) with a resolution of 128x64 pixels The ESP32 system enables communication of 2.4 GHz WiFi networks and Bluetooth BLE v4.2. The system has interfaces: UART, SPI, I2C. The evaluation set can be programmed, among others, in the Arduino environment, in the set with connectors for soldering.
Specification
- The ESP-WROOM-32 system
- Flash memory: 512 kb
- Clock timing: up to 240 MHz
- WiFi standard: 802.11 b / g / n / d / e / i / k / y
- Bandwidth: from 2.412 GHz to 2.484 GHz
- Bluetooth standard: Bluetooth v4.2
- Wi-Fi security: WEP, WPA / WPA2, PSK / Enterprise, AES / SHA2 / Elliptical Curve Cryptography / RSA-4096
- MicroUSB connector for power supply and programming
- 2 buttons: Enable and Boot
- Power supply voltage: from 3.3 V
- Goldpin connectors, 2.54 mm pitch (in the set, solder required)
- Dimensions: 64 x 28 x 8 mm (without connectors)
Included
- IoT Wi-Fi / BT development board with ESP32 chip and 0.96 "OLED display
- Goldpin connector for self-soldering
570606
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. Adafruit 3405
zł105.37
24h
Available quantity: 1
Available
Pmod ESP32 is a module with the ESP-WROOM-32 system, allowing for WiFi communication, Bluetooth BLE 4.0 and Bluetooth. For communication, the SPI or UART interface is used (selected by means of the slide switch), which were output on the 12-pin Pmod connector. Digilent 410-377
zł201.38
24h
Available quantity: 3
Available
Module from the ESP32 series, combining a powerful microcontroller, Wi-Fi and Bluetooth 4.2 BLE. ESP-WROVER-B has a built-in PCB antenna, a large number of GPIO lines and small dimensions. Adafruit 3979
zł49.18
24h
Available quantity: 1
Available
An Ethernet-Wi-Fi development board that allows you to connect Ethernet devices via Wi-Fi. It consists of two development boards: Ethernet (A) and PoE (B). The Ethernet (A) includes the ESP32-WROVER-E Bluetooth/Wi-Fi module and IP101GRI, and the PoE module (B) provides the power over Ethernet function.
zł339.01
24h
Available quantity: 1
Available
Other products in the same category (16)
ESP32-P4-WIFI6-POE-ETH-C is a high-performance Waveshare development board based on the ESP32-P4 and ESP32-C6 microcontrollers, designed for advanced HMI, edge computing, multimedia, and networked systems. It supports Wi-Fi 6, Bluetooth 5 LE, 100 Mbps Ethernet with PoE, and a rich set of video, audio, and I/O interfaces. ESP32-P4-WIFI6-POE-ETH-C
zł168.14
6 weeks
No product available!
ESP32-P4-WIFI6-POE-ETH is a high-performance Waveshare development board based on the ESP32-P4 and ESP32-C6 microcontrollers, designed for advanced HMI, edge computing, multimedia, industrial automation, and networked systems. It supports Wi-Fi 6, Bluetooth 5 LE, 100 Mbps Ethernet with PoE, and a rich set of I/O and multimedia interfaces. ESP32-P4-WIFI6-POE-ETH
zł113.32
6 weeks
No product available!
ESP32-S3 development board featuring a dual-core 240MHz processor, 2.4GHz Wi-Fi connectivity, 32MB Flash and 16MB PSRAM, supplied in a version with factory pre-soldered pin headers, designed for AIoT and embedded system projects. Waveshare ESP32-S3-DEV-KIT-N32R16V-M
zł75.45
6 weeks
No product available!
Development board based on the ESP32-S3-WROOM module with a dual-core 240 MHz processor, 32 MB Flash and 16 MB PSRAM, supporting 2.4 GHz Wi-Fi and Bluetooth LE, designed for IoT and AIoT projects. Waveshare ESP32-S3-DEV-KIT-N32R16V
zł68.01
6 weeks
No product available!
Development board based on the ESP32-S3 microcontroller, featuring a round 1.32-inch AMOLED capacitive touch display with a resolution of 466 × 466, support for 2.4 GHz Wi-Fi and Bluetooth 5 LE, as well as audio circuitry and expansion interfaces. Designed for wearable projects, user interfaces, IoT applications, and voice interaction solutions. ESP32-S3-Touch-AMOLED-1.32
zł103.16
6 weeks
No product available!
ESP32-C6 1.32inch AMOLED Round Touch Display Board, 466×466 Pixels, QSPI Interface - Waveshare 32766
ESP32-C6 1.32inch AMOLED Round Touch Display Development Board, 466×466 Pixels, QSPI Interface, Supports Wi-Fi 6 and Bluetooth 5. ESP32-C6-Touch-AMOLED-1.32
zł97.31
6 weeks
No product available!
ESP32-C6-based programmable smartwatch development board featuring a 2.06-inch AMOLED touch display with a resolution of 410 × 502, supporting Wi-Fi 6, Bluetooth 5 and Zigbee, designed for DIY wearable device development and prototyping. Waveshare ESP32-C6-Touch-AMOLED-2.06-EN
zł135.61
6 weeks
No product available!
A smartwatch-style development board based on the ESP32-C6 microcontroller, featuring a 2.06-inch AMOLED touch display with 410 × 502 resolution, supporting Wi-Fi 6, Bluetooth 5 and Zigbee, designed for DIY construction and prototyping of wearable devices, with an MX1.25 lithium battery included. Waveshare ESP32-C6-Touch-AMOLED-2.06
zł139.48
6 weeks
No product available!
Development board based on the ESP32-S3 microcontroller, featuring a 1.83 inch IPS touch display with a resolution of 240 x 284, WiFi and Bluetooth 5 connectivity, onboard audio codec, microphones, and speaker, designed for IoT projects and interactive applications. Waveshare ESP32-S3-Touch-LCD-1.83-EN
zł99.22
6 weeks
No product available!
Development board based on the ESP32-S3 microcontroller, featuring a 1.83 inch IPS touch display with a resolution of 240 x 284, WiFi and Bluetooth 5 connectivity, onboard audio codec, microphones, speaker, and an included 3.7 V lithium battery, designed for IoT projects and interactive applications. Waveshare ESP32-S3-Touch-LCD-1.83
zł103.98
6 weeks
No product available!
An intelligent digital photo frame based on the ESP32-S3 microcontroller, featuring a 7.3-inch full-color E Ink Spectra 6 (E6) e-paper display with a resolution of 800 × 480 pixels, enclosed in an elegant solid wood frame. The device offers ultra-low power consumption, Wi-Fi and Bluetooth connectivity, AIoT capabilities, voice interaction, and photo and information display, making it ideal for decorative and informational applications. ESP32-S3-PhotoPainter (no BAT)
zł347.29
6 weeks
No product available!
An intelligent digital photo frame based on the ESP32-S3 microcontroller, equipped with a 7.3-inch full-color E Ink Spectra 6 (E6) e-paper display with a resolution of 800 × 480 px, enclosed in an elegant solid wood frame. Support for Wi-Fi, Bluetooth, AIoT, and voice interaction, combined with ultra-low power consumption and the option of powering from a 3.7 V lithium battery, makes it suitable for decorative and informational applications. Waveshare ESP32-S3-PhotoPainter
zł346.71
6 weeks
No product available!
A compact development platform based on the dual-core ESP32-S3 processor, designed for prototyping embedded systems and IoT projects. The device features a 1.14-inch LCD display, a 56-key keyboard, and extensive audio features with a microphone, speaker, and headphone jack. A built-in accelerometer, IR emitter, microSD slot, and Grove connectors enable easy expansion and integration with sensors. Powered by a 1750 mAh Li-ion battery, it offers portability and long battery life. M5Stack K132-Adv
zł171.90
24h
Available quantity: 24
Available
ESP32 development board with Ethernet interface and support for passive PoE 9–57 V, featuring USB-C, 17 GPIO and a 5 V 2 A power output, designed for IoT projects requiring a stable wired network connection. Elecrow CQE0005P1
zł177.37
24h
Available quantity: 2
Available
An educational kit for learning machine learning and tinyML, based on the XIAO ESP32-S3 Sense module with a built-in camera and microphone. It includes an expansion board with a 6-axis IMU sensor, OLED display, and microSD card reader, allowing you to work with video, audio, and motion data. The kit supports the Arduino IDE, TensorFlow Lite, and the SenseCraft AI platform, allowing you to easily train and deploy ML models on edge devices. Seeed Studio E2025080501
zł229.63
4 weeks
No product available!
Development board based on the ESP32-C6 microcontroller with a 1.8-inch capacitive AMOLED touch display at 368 x 448 resolution, supporting Wi-Fi 6, BLE 5, Zigbee, and Thread, designed for advanced IoT projects and user interfaces. Waveshare ESP32-C6-Touch-AMOLED-1.8
zł135.94
6 weeks
No product available!
A board with a built-in ESP-WROOM-32 module and an 0.96 "OLED display (SSD1306) with a resolution of 128x64. The ESP32 system enables communication of WiFi 2.4 GHz and Bluetooth BLE v4.2 networks. modESP32_OLED