Power cord with a length of 20 cm with SATA and XH2.54 plug. It allows you to power a hard drive with a SATA connector.

Flexible LED (LED filament) in pink, length 300 mm

A power cable with a built-in Power Delivery (PD) trigger with a working voltage of 20 V. It has a USB type C connector and a 4,5x3mm DC plug used in Dell laptops. Length 1.8 m

Laser sensor module with a range of up to 50 m and an accuracy of 1 mm. Communication with the module takes place via the UART interface.

Diagnostic interface for wireless diagnostics of cars with OBD2 system. The device uses the popular 16-pin connector and is equipped with a Bluetooth 2.0 module. ELM327 Mini V1.5

The DC charging and discharging module provides a stable 5V output with a maximum load current of 2A, regardless of the connected device. Equipped with a charge level indicator, push-button control and battery protection, it is suitable for projects such as DIY power banks, driving recorder power supply or charging mobile devices. DFRobot DFR1026

A power cable with a built-in Power Delivery (PD) trigger with a working voltage of 20 V. It has a USB type C connector and a 4x1,7mm DC plug used in Lenovo laptops. Length 1.8 m

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M0+, 64KB Flash, 8KB SRAM, 2KB EEPROM, LCD, USB, ADC, DAC, AES, LQFP48, STM, RoHS

WiFi module, IEEE802.11b / g / n, I-PEX connector, High-Flying, RoHS

15.6" LCD display with touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. High resolution 1920x1080 pixels. Waveshare 15.6inch HDMI LCD (for EU)

Ultrasonic distance sensor MB1020 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 792

SEN0017

Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0750-Y

Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5291

Module with the PAM8904 controller designed specifically to control piezoelectric elements. The amplifier operates over a wide frequency range, up to 300 kHz, and allows for gain up to approximately 13 Vpp. Adafruit 5791

Wide angle lens with CS-Mount. Focal length 6 mm, FoV 65°, manual focus. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN029

Unshielded UTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCU6-10CC-0150-G

Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0750-G

Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5295