Lanberg Cat. 6A patch cord with Fluke Passed certification guarantees the highest quality and reliability, enabling optimal network connection compatible with various network devices in any environment. Lanberg PCF6A-10CC-1000-G

WiFi module based on ESP8266. It has an embedded antenna and 0.96 "OLED display. The module can be programmed in Lua (under NodeMCU firmware control) or in the Arduino IDE. Provides 12 GPIO lines.

A power cable with a built-in Power Delivery (PD) trigger with a working voltage of 20 V. It has a USB type C connector and a 4x1,7mm DC plug used in Lenovo laptops. Length 1.8 m

ARM Cortex-M0 CPU, 16kB Flash, 4kB RAM, UART, I2C, SPI, ADC, TSSOP20, STM, RoHS

A power cable with a built-in Power Delivery (PD) trigger with a working voltage of 20 V. It has a USB type C connector and a 4,5x3mm DC plug used in Dell laptops. Length 1.8 m

Ultrasonic distance sensor MB1020 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 792

STM32G050K8T6, 32-bit STM32G0 family microcontroller, Arm Cortex-M0+ core, 64 MHz, 64 KB of Flash memory, 16 KB of RAM, LQFP32

The module with the MAX30100 chip that monitors the oxygen content in the blood and the heart rate. It consists of two LED diodes, a photodetector, optimized optics and low noise analog signal processing. modMAX30100

Full spectrum LED module with a supply voltage of 230 V AC and a power of 50 W. Dedicated to growing plants

Module with the HR1124S DC motor controller with a maximum current of 1.2 A. It can be powered with the voltage from 1.8 V to 6.8 V and is controlled by two PWM signals

Pulse Electronics JK0-0136NL is a single-pass RJ45 connector module (ICM) for 100/1000 Base-T connections, designed for network cards, LAN-on-Motherboard solutions and computer applications. Compatible with the IEEE 802.3 standard, provides high performance and EMI suppression, available in TAB-UP configuration with green and yellow LEDs.

Lanberg Cat. 6A patch cord with Fluke Passed certification guarantees the highest quality and reliability, enabling optimal network connection compatible with various network devices in any environment. Lanberg PCF6A-10CC-1000-R

Module of a 4-channel driver of DC motors with RP2040 microcontroller. It allows the connection of encoders and is equipped with a QW/ST connector. Pimoroni PIM636

Power cord with a built-in Power Delivery (PD) trigger with a working voltage of 15 V. Has a USB type C connector and a DC plug 5.5x2.5 mm. Length 3 m

Toggle switch, two-position with cover and LED illumination. It can switch voltage up to 12 V and current up to 20 A

ARM Cortex-M4 MCU, 128 KB Flash, 64kB SRAM, 84 MHz CPU, DSP with FPU, Art Accelerator, LQFP64, STM, RoHS

The 250mm SATA Cable Kit enables you to connect your HDD/SSD in your ODROID-H4 Case Type 4 enclosure, providing a tidy installation in tight spaces. Includes a SATA 3.0 data cable with securing latches and a Mini 4-pin to SATA 15-pin power cable with 18 AWG wires

40-pin ZIF socket dedicated to DIP packages. It allows for multiple plugging without the risk of damaging the leads. Waveshare DIP 40 Pin ZIF Socket (Green)