Category: Electronic modules

Single-channel DC motor driver with an operating voltage from 8 to 28 V and a continuous current up to 160 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDS160A

USB - UART converter based on the PL2303 chip

Waveshare Core429I is a PCB with STM32F429IGT6 microcontroller, contains necessary elements for microcontroller operation, all GPIOs connected to goldpin connectors

WIFI-LPT100 Eval Kit module enables UART data transmission via WiFi, ultra low power consumption, encrypted communication

The expansion module to support two cameras is designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via CSI connectors to one minicomputer connector. ArduCAM B016601

Class D PAM8410 class D stereo digital audio amplifier. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 15 W per channel

The S9V11F3S5CMA switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.)

The S9V11MA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whether it is higher or lower than the input voltage, which can range from 2 V to 16 V.  Pololu 2869 

TPA3110 digital stereo audio amplifier module. The system allows you to connect two speakers with an impedance from 4 Ω to 8 Ω and a power of 15 W

The camera module is based on a CMOS sensor - AR0134. It has a resolution of 1280 x 960 px (1.2 MPx). The module supports recording of video sequences: 1280 x 960 @ 54fps and 1280 x 720 @ 60Ffps. Intended for use only with the ArduCam USB Shield module. Arducam B0100

Pololu Dual G2 High-Power Motor Driver 18v22 is an extension that allows you to control two DC motors designed for Raspberry Pi. The motors can be powered with 6.5-30V and draw up a maximum current of 22A. Pololu 3754

Pololu Dual G2 High-Power Motor Driver 24v18 is an extension that allows you to control two DC motors designed for Raspberry Pi. The motors can be supplied with 6.5-36V voltage and can draw a maximum current of 18A. Pololu 3756

Pololu Dual G2 High-Power Motor Driver 18v22 is an extension that allows you to control two DC motors designed for Arduino tiles. The motor can be supplied with 6.5 ... 30V voltage and can draw up a maximum current of 22A. Polol 2517

HAT module with a driver for two DC motors designed for Raspberry Pi. Motors can be powered with the voltage from 6.5 to 30 V and draw a maximum current of up to 18 A. Pololu 3751

Module with LM2596 step-down converter and LM2577 step-up converter. The inverter has a battery and battery indicator with constant current

Stereo audio amplifier based on the TDA7498 chip. It can be powered with the voltage from 20 to 36 V and has two 100 W outputs

The Arducam Mini Multi-Camera Adapter Board is an expander that can connect up to 4 ArduCam cameras. ArduCam B0074

Module with 4 SSR relays with a load of up to 3 A. The board communicates via the USB interface. Numato Lab SSR40001-AC