Category: Audio

Sound recording module with I2C interface. It can store sounds up to 100 seconds long. DFRobot SEN0197

Audio recorder module that allows for multiple recording and playback of sounds. Comes with a loudspeaker

Stereo audio amplifier with Bluetooth 5.0 communication. It can be powered with the voltage from 5 to 24 V and has two outputs with a power of 50 W. Assembly kit. ZK-502L

Stereo audio amplifier with Bluetooth 5.0 communication. It can be powered with the voltage from 5 to 24 V and has two outputs with a power of 100 W. ZK-1002L

Pmod I2S2 is a module with 24-bit A / C and D / C audio converters derived from standard 3,5 mm Jack connectors. Thanks to them, it is possible to send and receive stereo audio signals using the I2S protocol. Digilent 410-379

Module with audio amplifier and 8 Ω speaker with a power of 1 W. The board is equipped with a STEMMA connector. Adafruit 3885

Class D digital audio amplifier. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 11 to 26 V

MEMS microphone module that will allow voice detection, sound recording or audio transmission. It communicates via an I2S interface. DFRobot SEN0526

Bluetooth 4.1 audio receiver with 3.5mm Jack audio output. It allows you to play files via Bluetooth, from mass memory (pendrive) or microSD card and supports WAV, APE, MP3 and FLAC formats. XY-BT-L

Crossover for woofers with a division frequency of 300 Hz. Works with 4 to 8 ohm speakers and offers up to 200 watts of power

Sound card in the form of an expansion module with a USB adapter designed for NVIDIA Jetson Nano development kits. Waveshare Audio Card for Jetson Nano

Expansion module with audio and video outputs dedicated to Raspberry Pi Pico boards. It has a VGA output, SD card slot, audio outputs and control buttons. Pimoroni PIM553

Audio module with speakers designed to work with the Raspberry Pi Pico. Waveshare Pico-Audio

Analog audio level indicator in the form of a panel meter. Powered with AC or DC voltage from 6 to 12 V, it has a built-in green backlight

The PAM8403 class D stereo digital audio amplifier module is equipped with Bluetooth communication. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 3 W

Audio module with DAC, stereo amplifier and display, designed to work with the Raspberry Pi. Pimoroni PIM484

The module with a digital stereo audio amplifier is equipped with Bluetooth communication. The system allows you to connect two speakers with an impedance of 6 Ω or 8 Ω with a power of 6 W per channel

Class A power amplifier with one channel (mono) with the power of 10 W. Built on the popular design of J. Hood from 1969

Class-D mono audio amplifier module based on the MAX98357 chip. It can work with a 4 to 8 ohm speaker of up to 2.5 W and communicates via an I2S interface. DFRobot DFR0954

The audio module with the PCM5100A DAC converter is designed to work with the Raspberry Pi. Pimoroni PIM542