This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 100.37:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.

Key specs at 12 V: 320 RPM and 100 mA with no load, 30 oz-in (2.2 kg-cm) and 0.8 A at stall.

A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 100 RPM, operating voltage 6 V. GA1036-N20M-0055

DC motor with 1:84 planetary gear with a supply voltage from 6 to 24 V and a rotational speed of 140 RPM. Maximum current consumption up to 1.3 A. SparkFun ROB-15277

Pololu low-power miniature engine, with a 15:1 transmission, shaft speed is 1400 rpm, torque is 0.2 kg * cm (0.02 Nm). Pololu 4783

Motor with 37 mm diameter and 65 mm length, 10:1 metal gear, 12 V operating voltage, 0,2 A to 5,5 A power consumption, 1000 RPM speed, 4,9 maximum torque and 64 CPR encoder. Pololu 4758

Motor with 25 mm diameter and 58 mm length, 378:1 metal gear, 12 V operating voltage, 0,1 A to 1,1 A power consumption, 14 RPM speed and 23 maximum torque. Pololu 3258

Small motor with metal gear and encoder, rotation speed 200 RPM, operating voltage 12 V. Waveshare DCGM-N20-12V-EN-200RPM

DC Micro motor module with metal gear with a gear ratio of 75:1. The motor is connected to the board containing the driver. DFRobot DFR0399

50:1 Micro Metal Gearmotor HP with Extended Motor Shaft

DC motor with plastic gear 1:48. Equipped with an incremental encoder with Hall sensors.

DC motor equipped with a metal gear 1:90 with a cut shaft on both sides

Solarbotics GM8 143:1 Gear Motor Offset Output

Motor with 37 mm diameter and 57 mm length, 150:1 metal gear, 24 V operating voltage, 0,1 A to 3 A power consumption, 68 RPM speed and 56 maximum torque. Pololu 4687

Pololu high power miniature motor with carbon brushes. 100:1 gear motor, shaft speed is 330 rpm, torque 1.3 kg*cm. Pololu 3041

This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.

Key specs at 6 V: 290 RPM and 40 mA with no load, 17 oz-in (1.2 kg-cm) and 0.7 A at stall.

Motor with 20 mm diameter and 41 mm length, 25:1 metal gear, 6 V operating voltage, 0.15 A to 2.9 A power consumption, 570 RPM speed and 1.6 kg*cm maximum torque. Pololu 3462

This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 4.995:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.

DC motor with 1:48 plastic gearbox. equipped with incremental encoder with Hall sensors. Includes bracket, mounting hardware and cord

High-power brushed DC motor with a 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is perpendicular to the motor shaft, and a built-in safety clutch. Pololu 1511

This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.