Adafruit Feather RP2040 - board with RP2040 microcontroller
ID: 583888
5906623430000
zł79.03
Tax included
zł64.25 tax excl.
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Adafruit 4884
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Adafruit Feather RP2040 is a board equipped with the RP2040 microcontroller designed by the Raspberry Pi foundation. The system has two ARM Cortex M0+ cores operating at a frequency of 133 MHz and 256 KB of RAM. The microcontroller is not equipped with flash memory, but on the board there is an external memory with a capacity of 8 MB connected via QSPI interface.
On the board, in addition to the RP2040 system and Flash memory, the user will find a 3.3 V voltage stabilizer, Boot and Reset buttons, LED and RGB NeoPixel diodes, a USB type C connector for powering and programming the module, and 21 GPIO outputs with such parameters. as four 12-bit ADC inputs, 16 PWM outputs, two I2C, SPI and UART interfaces.
The platform supports the popular MicroPython and C/C++ programming languages. Programs can be loaded to the memory via the USB interface using the built-in UF2 bootloader or an external programmer via the SWD interface.
Features
- RP2040 microcontroller designed by Raspberry Pi
- Dual ARM Cortex-M0+ cores clocked up to 133 MHz
- 264 kB of onboard SRAM
- Real time clock (RTC)
- Voltage regulator 3.3 V 500 mA
- Battery charging circuit 200 mA
- Built-in USB Type-C connector for programming with USB 1.1, operating in Host and Device modes
- 21 x multi-functional GPIO pins
- 4 x 12-bit ADC inputs with internal temperature sensor, 0.5 MSa / s
- 16 PWM channels
- 2 x UART
- 2 x I2C
- 2 x SPI
- Reset and Boot buttons
- LEDs and NeoPixel
- STEMMA QT connector compatible with Qwiic and Grove systems
- SWD interface connector
- 8 MB external flash memory
- Supported programming languages: MicroPython and C/C++
- Dimensions: 50.8 x 22.8 x 7 mm
583888
Data sheet
- Microcontroller
- RP2040
- Flash memory
- 8 MB
- Number of I/O
- 21
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 50,8 mm
- Width
- 22,8 mm
- USB connector type
- microUSB type B
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
zł4.10 24hAvailable quantity: 27 AvailableCable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
zł5.71 24hAvailable quantity: 37 AvailableCable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
zł5.77 24hAvailable quantity: 62 Available
Other products in the same category (16)
Adafruit Feather nRF52840 Express is an advanced development board with Bluetooth LE and native USB, perfect for mobile and portable applications. With ample memory, support for CircuitPython and Arduino IDE, and numerous interfaces, it is an excellent tool for creating advanced projects. Adafruit 4062
zł150.29 24hAvailable quantity: 2 AvailableLow-power, 2.4GHz spectrum wireless protocol that you can use with iOS without needing special certification. Supported by all modern smart phones - excellent for use in portable projects that will make use of an iOS or Android phone or tablet; it also is supported in Mac OS X and Windows 8+. Adafruit 2995
zł195.89 24hAvailable quantity: 1 AvailableAt the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip. Adafruit 3179
zł206.63 24hAvailable quantity: 2 AvailableAdafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. Adafruit 3405
zł117.08 24hAvailable quantity: 1 AvailableDevelopment kit with SAMD21G18 microcontroller with ARM Cortex M0 core and LoRa RFM95 868/915 MHz radio communication module. Adafruit 3178
zł193.31 24hAvailable quantity: 1 AvailableModule with ATSAMD21G18 microcontroller and 900 MHz wireless transceiver. The module can be used for transmission in the ISM 868 MHz band after the appropriate software configuration. The ATSAMD21G18 microcontroller (ARM Cortex-M0) is clocked at 48 MHz and operates at 3.3 V. Adafruit 3176
zł147.12 24hAvailable quantity: 1 AvailableModule with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5477
zł97.61 24hAvailable quantity: 2 AvailableA board with an RP2040 microcontroller and a radio module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and a STEMMA QT connector. Adafruit 5712
zł121.44 24hAvailable quantity: 4 AvailableModule with WiFi and BLE Espressif ESP32-S3 system and LCD TFT display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5483
zł155.03 24hAvailable quantity: 7 AvailableModule with WiFi Espressif ESP32. It offers 8MB Flash, 2MB PSRAM, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5438
zł111.87 24hAvailable quantity: 3 AvailableAdafruit Feather 32u4 RFM95 is a development board with built-in ATmega32u4 AVR microcontroller (8MHz, 32kB Flash, 2kB RAM) and RFM95W module enabling wireless communication in the 868 MHz or 915 MHz band. The board is compatible with Arduino IDE. Adafruit 3078
zł191.01 24hAvailable quantity: 1 AvailableAdafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, the module has a built-in system for charging Li-Pol batteries. The plate has soldered goldpin connectors (female extension). Adafruit 3619
zł157.76 24hAvailable quantity: 1 AvailableModule with WiFi Espressif ESP32-S2. It integrates two 3.3 V stabilizers, SPI Flash memory, LiPo charging circuit, light sensor and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4769
zł183.63 24hAvailable quantity: 1 AvailableDevelopment board with ESP8266 microcontroller with built-in Wi-Fi communication. The system is clocked at 80 MHz and powered by 3.3 V. It includes a Tensillica core and a full Wi-Fi stack. Adafruit 3046
zł111.73 24hAvailable quantity: 3 AvailableThe board is equipped with ATSAME51 microcontroller (ARM Cortex-M core) with CAN bus and SPI Flash memory, GPIO pins and a connector for connecting the battery with the charging circuit. Adafruit 4759
zł143.34 24hAvailable quantity: 3 AvailableBoard with RP2040 microcontroller and HDMI video connector. Has a built-in LiPo charging circuit and STEMMA QT connector. Allows the use of the Feather module to display data on a monitor. Adafruit 5710
zł85.77 24hAvailable quantity: 5 Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Adafruit 4884