3-CH Relay for Jetson Nano - module with three relays for Jetson Nano
ID: 583765
5906623422388
€16.63
Tax included
€13.52 tax excl.
The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano
Description
Module with electromechanical relays designed to work with NVIDIA Jetson Nano. It is equipped with three 5A / 250VAC relays controlled by digital outputs, and the relay contacts are led out to the ARK screw terminals. The module connects to the minicomputer via a 40-pin GPIO connector. The set includes an acrylic pad isolating the plate from Jetson Nano. The module uses optocouplers that prevent interference from high voltage circuits. There are also LED indicators on the board that indicate the operating status of the relays.
| 1. GPIO 40-pin header | 5. Relay LED indicators |
| 2. Relay screw terminals | 6. Power supply indicator |
| 3. Relay components | 7. Relay control pin selection jumpers |
| 4. Optocouplers |
Pinout description
Features
- 40-pin GPIO connector, plugs directly into Jetson Nano
- Number of channels: 3
- Maximum load: ≤5A 250VAC or ≤5A 30VDC
- Optocoupler isolation, prevents interference from high voltage circuits
- Indicators for monitoring the operating status of the relay
- The control pins can be configured with jumpers
- Acrylic bottom panel isolating the Jetson Nano from the expansion module
- Dimensions: 100 x 79 mm
Kit contains
- 3-CH Relay for Jetson Nano module
- Insulating washer
- Set of screws
583765
Data sheet
- Output current
- 5A
- Number of channels
- 3
- Executive element
- Przekaźnik
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU chip and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has a DDR4 4GB RAM memory. NVIDIA Jetson Nano Development Kit rev. B01 945-13450-0000-100
Delivery date unknown No product available!
Other products in the same category (16)
Camera module with IMX477 sensor with a resolution of 12.3 MP for NVIDIA Jetson Nano/Xavier and Raspberry Pi Compute Module. ArduCAM B0279
€84.65 24hAvailable quantity: 3 AvailableAdapter for NVIDIA Jetson modules to connect the NVIDIA Jetson AGX Xavier module to the NVIDIA Jetson TX1, TX2 and TX2i carrier. Connect Tech AGX001
€595.66 6 weeks No product available!
A set with two OV9281 cameras with a resolution of 1MP and an expansion module for Raspberry Pi, Jetson Nano and Xavier NX, which allows you to simultaneously connect two cameras to the minicomputer. ArduCAM B0266
€248.45 4 weeks No product available!
- ArduCAM High Quality IR-CUT Camera - module with HQ IMX477 camera and lens for Jetson Nano/Xavier NX
Camera module designed for NVIDIA Jetson Nano/Xavier. The camera is equipped with a Sony IMX477 sensor with a lens and an IR-CUT filter. ArduCAM B0274
€124.38 24hAvailable quantity: 1 Available The kit includes a module with two cameras with an IMX219 sensor with a resolution of 8 MP and an expansion module for NVIDIA Jetson Nano. ArduCAM B0217J8
€173.38 24hAvailable quantity: 1 AvailableBase board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with MIPI CSI-2 connector, USB OTG, UART and I2C. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG008
€236.89 6 weeks No product available!
Kit for the construction of the intelligent JetBot robot based on Jetson Nano. It consists of a board (module with OLED display, battery basket and motor controller), expansion module with connectors, cameras with Sony IMX219 image sensor, motors, housing and a set of mounting screws. It is also equipped with a 2.4/5 GHz WiFi module and Bluetooth 4.2. Waveshare JetBot AI Kit Accesories
€119.51 24hAvailable quantity: 4 Available3.2" IPS LCD Display. It is equipped with an HDMI interface for image display and has a resolution of 480x800 pixels. Waveshare 3.2inch HDMI LCD (H)
€36.51 24hAvailable quantity: 3 Available5G/4G/3G and GNSS module with SIM8202G-M2 chip. It allows you to make phone calls, SMS support, cloud communication and has support for GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare SIM8202G-M2 5G for Jetson Nano (EU)
€358.59 4 weeks No product available!
Cooling fan dedicated to the NVIDIA Jetson Orin NX and Orin Nano minicomputers. Waveshare Orin-FAN-PWM
€13.99 24hAvailable quantity: 5 AvailableBase plate for NVIDIA Jetson TX2 / TX2i and Jetson TX1 modules. Equipped with MIPI CSI-2, Mini-PCIe / mSATA extension, HDMI Video, USB 3.0 and 2.0 as well as two serial ports for RS-232/485. Connect Tech ASG002
€974.10 6 weeks No product available!
Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and Raspberry Pi Compute Module, RDK X3, VisionFive2, etc. It is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 200°. Waveshare IMX219-200 Camera
€27.57 24hAvailable quantity: 1 AvailableBase plate for NVIDIA Jetson TX2 / TX2i and Jetson TX1 modules. Equipped with 2 Gigabit Ethernet, HDMI, USB 3.0, USB 2.0, USB CLIENT ports, as well as miniPCIe extension, mSATA and optional GPS / GNSS module. Connect Tech ASG006 / ASG009
€1,400.22 6 weeks No product available!
5" LCD TFT display with touch screen. The display is equipped with HDMI and VGA interface for image display and USB for touch screen. Resolution 800x480 pixels. Waveshare 5inch HDMI LCD (H)
€61.56 24hAvailable quantity: 3 AvailableCamera module designed for NVIDIA Jetson Nano/Xavier NX. The camera is equipped with a Sony IMX477 sensor and focus controlled by the I2C interface. ArduCAM B0273
€102.11 24hAvailable quantity: 1 AvailableA two-part metal case with a fan designed to build a set with Orbitty Carrier and NVIDIA Jetson TX1 or NVIDIA Jetson TX2. Connect Tech ENC001+XHG302
€244.05 6 weeks No product available!
The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano