Orin-FAN-PWM fan for NVIDIA Jetson Orin - Waveshare 24076

Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with MIPI CSI-2 connector, USB OTG, UART and I2C. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG008

Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a viewing angle of 62° and a 30 cm extension cord. ArduCAM B0320

Cooling fan dedicated to the minicomputer NVIDIA Jetson Xavier NX. Waveshare NX-FAN-PWM

Metal housing with a camera holder and a hole for a fan. Designed for the NVIDIA Jetson Orin Nano or Jetson Orin NX development kit. Waveshare JETSON-ORIN-CASE-A

Astro Carrier base plate attachment designed to work with the NVIDIA Jetson TX2i module. It has HDMI, USB 3.0 and USB 2.0, Ethernet as well as Mini PCIe and mSATA connectors. The overlay is plugged into the plate-to-board connector available on the Astro base plate. Connect Tech XBG206

A cooling kit in the form of a fan with an aluminum heat sink dedicated to the minicomputer NVIDIA Jetson Xavier NX. Seeed Studio 114992746

Expansion board with 5G module RM520N-GL dedicated to NVIDIA Jetson Nano minicomputers. The module supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. It also offers the ability to support GNSS positioning systems, including GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare RM520N-GL 5G for Jetson Nano (EU)

10.1" LCD IPS display with touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. High resolution 1024x600 pixels. Waveshare 10.1inch HDMI LCD (E)

Base board dedicated to NVIDIA Jetson Nano modules. It offers numerous connectors, including M.2 Key E, 40-pin GPIO, Ethernet, USB 3.0, and HDMI and DisplayPort outputs. Waveshare JETSON-IO-BASE-A

The GMSL adapter with the MAX9296A chip enables integration of two GMSL cameras with Jetson Orin platforms, ensuring reliable high-bandwidth, low-latency video transmission. With support for PoC and broad compatibility with camera models and development boards, the module is suitable for use in ADAS systems, industrial automation, surveillance, and smart city applications.

Camera module with IMX219 sensor with a resolution of 8 MP equipped with programmable focus. Designed for NVIDIA Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0181

A set with four OV9281 cameras with a resolution of 1MP and an expansion module for Raspberry Pi, Jetson Nano and Xavier NX, which allows you to simultaneously connect four cameras to the minicomputer. ArduCAM B0267

Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and Raspberry Pi Compute Module. It is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 120°. Waveshare IMX219-120 Camera

Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and Raspberry Pi Compute Module, RDK X3, VisionFive2, etc. It is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 200°. Waveshare IMX219-200 Camera

Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with a USB 3.0, USB 2.0 OTG, HDMI, GbE connector, as well as a micro SD card slot. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG003

Starter Cable Kit for Rogue Carrier. Connect Tech CKG064