JETSON-IO-BASE-B baseboard for Jetson Xavier NX - Waveshare 22452
ID: 1182301
zł396.75
Tax included
zł322.56 tax excl.
A baseboard dedicated to NVIDIA Jetson Xavier NX modules. It offers numerous connectors, including M.2 Key E, M.2 Key M, 40-pin GPIO, Ethernet, USB 3.0, and HDMI and DisplayPort outputs. Waveshare JETSON-IO-BASE-B
Description
A baseboard dedicated to NVIDIA Jetson Xavier NX modules. It offers numerous connectors, including M.2 Key E, M.2 Key M, 40-pin GPIO with I2C, SPI, UART and I2S interfaces, Gigabit Ethernet socket, four USB 3.0 connectors, two MIPI CSI-2 camera inputs and HDMI and DisplayPort video outputs.
The board is a good base for prototyping devices based on NVIDIA modules. It can be used as a replacement for the original base board used in the NVIDIA Jetson Xavier NX development kit. For the kit, the manufacturer offers extensive support in the form of numerous examples and documentation. More information can be found on the product wiki page, among others.
Właściwości
- Connection to Jetson Xavier NX
- 260-pin SO-DIMM connector
- USB
- USB 2.0 Micro B (device only)
- USB 3.1 (Gen2) hub to 4x Type A (host only)
- Gigabit Ethernet (RJ45 connector with PoE and LEDs)
- Display
- HDMI ™ Type A (v2.0a / b)
- VESA® DisplayPort ™ (v1.4)
- Camera connectors
- 2x 15 position flex connectors
- CSI (2.5 Gb / s per pair): 1, x2 (each connector)
- CLK camera, I2C and control
- M.2 key of E.
- PCIe (Gen3) x1 Lane, USB 2.0
- I2S, UART, I2C
- M.2 Key M connector
- PCIe (Gen4) x4 path, control
- Expansion connector
- 40-pin (2x20) header
- I2C (x2), SPI (x2), UART
- I2S, audio clock, GPIO, PWM
- User interface and indicators
- Button header: power, reset and forced recovery
- Power LEDs
- Debugging/serial interface
- Fan connector: 5 V, PWM and tach
- Optional spare RTC battery basket
- Optional CAN connector (5 MHz)
- Power
- DC jack: 9-20 V (19 V power supplied)
- Optional PoE and Ehternet backpower
- 5.0 V main power supply: TPS53015
- 3.3 V main power supply: TPS53015J
- 1.8 V main power supply: TLV70018
- 3.3 V AO power supply (always on): GS7116S5
- USB VBUS supplies: AP22811AW5-7 (x2)
- HDMI 5V power switch: APL3552ABI-TRG
- HDMI 3.3V power supply: GS7616CS-R
- DP 3.3V power switch: APL3552ABI-TRG
- Operating temperature range: from 0 to 35⁰C
- Dimensions: 103 x 90.5 x 31 mm
1182301
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
NVIDIA module with the NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics consisting of 384 cores supporting CUDA technology and 48 Tensor cores. The system is supported by DDR4 RAM with a capacity of 8 GB, DisplayPort interface, HDMI, USB 3.1, PCIe and MIPI-CSI cameras 900-83668-0000-000.
zł3,528.54
Delivery date unknown
No product available!
Minicomputer with built-in NVIDIA Jetson Xavier NX module with 8 GB RAM. In an aluminum housing, it has the JetPack installed. Seeed Studio 110061363
zł4,235.78
Delivery date unknown
No product available!
Minicomputer with built-in NVIDIA Jetson Xavier NX module with 16 GB RAM. In an aluminum housing, it has the JetPack installed. Seeed Studio 110061401
zł4,941.88
Delivery date unknown
No product available!
Minicomputer with built-in NVIDIA Jetson Xavier NX module with 8 GB RAM. In an aluminum housing, it has the JetPack installed. Seeed Studio 110061381
zł4,799.00
Delivery date unknown
No product available!
A development kit dedicated to creating modern solutions based on artificial intelligence. It consists of a Jetson Orin Nano Super 8GB module and a base board that can connect to all versions of Orin Nano and Orin NX modules. It is an ideal platform for creating prototypes of next-generation edge-AI products. NVIDIA 945-13766-0005-000
zł1,999.06
24h
Available quantity: 26
Available
Other products in the same category (16)
Cooling fan dedicated to the minicomputer NVIDIA Jetson Xavier NX. Waveshare NX-FAN-PWM
zł58.62
24h
Available quantity: 1
Available
1 MP camera with USB interface. Equipped with a wide-angle lens with a viewing angle of 140°. DFRobot FIT0892
zł94.27
24h
Available quantity: 2
Available
Expansion module with an industrial interface RS485 and CAN dedicated to minicomputers NVIDIA Jetson Nano. Equipped with protection and electrical insulation. Waveshare RS485 CAN for Jetson Nano
zł93.53
4 weeks
No product available!
Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 127° angle of view. Waveshare IMX462-127 2MP Starlight Camera
zł326.49
4 weeks
No product available!
Cooling fan dedicated to the minicomputer NVIDIA Jetson TX2 NX. Waveshare TX2-FAN-PWM
zł54.55
24h
Available quantity: 1
Available
Uninterruptible power supply (UPS) module for the Jetson Nano, allowing the minicomputer to continue working and shut down safely after a power failure. Uninterruptible power supply included. Waveshare UPS Power Module (EU)
zł115.45
4 weeks
No product available!
A baseboard dedicated to NVIDIA Jetson Xavier NX modules. It offers numerous connectors, including M.2 Key E, M.2 Key M, 40-pin GPIO, Ethernet, USB 3.0, and HDMI and DisplayPort outputs. Waveshare JETSON-IO-BASE-B
zł396.75
4 weeks
No product available!
The case is designed for NVIDIA Jetson Nano minicomputers. It is made of aluminum, has a built-in power and reset button and space for a fan or heatsink. Waveshare Jetson Nano Case (F)
zł116.53
4 weeks
No product available!
Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and Raspberry Pi Compute Module, RDK X3, VisionFive2, etc. It is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 200°. Waveshare IMX219-200 Camera
zł103.54
4 weeks
No product available!
Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and Raspberry Pi Compute Module. It is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 120°. Waveshare IMX219-120 Camera
zł94.14
4 weeks
No product available!
Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and Raspberry Pi Compute Module. It is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 79,3°. Waveshare IMX219-77 Camera
zł89.67
4 weeks
No product available!
Base board dedicated to NVIDIA Jetson Nano modules. It offers numerous connectors, including M.2 Key E, 40-pin GPIO, Ethernet, USB and HDMI output. Waveshare JETSON-IO-BASE-LITE
zł299.00
4 weeks
No product available!
AR0234 sensor module that works with NVIDIA Jetson Nano and Xavier NX kits. The sensor used has a 2.3 MP sensor and allows video recording at 1920×1200@30fps. It is equipped with a global shutter. ArduCAM B0429
zł473.41
4 weeks
No product available!
Cooling fan dedicated to the NVIDIA Jetson Orin NX and Orin Nano minicomputers. Waveshare Orin-FAN-PWM
zł51.86
4 weeks
No product available!
Base board dedicated to the Jetson Orin Nano and Orin NX modules. Ideal for creating state-of-the-art solutions based on artificial intelligence. It will prove itself as a platform for prototyping next-generation edge-AI products. Waveshare JETSON-ORIN-IO-BASE
zł357.18
4 weeks
No product available!
Metal housing with a camera holder and a hole for a fan. Designed for the NVIDIA Jetson Orin Nano or Jetson Orin NX development kit. Waveshare JETSON-ORIN-CASE-A
zł61.09
4 weeks
No product available!
A baseboard dedicated to NVIDIA Jetson Xavier NX modules. It offers numerous connectors, including M.2 Key E, M.2 Key M, 40-pin GPIO, Ethernet, USB 3.0, and HDMI and DisplayPort outputs. Waveshare JETSON-IO-BASE-B