UPS power module for Jetson Nano (EU) - Waveshare 18307
ID: 1182294
zł115.45
Tax included
zł93.86 tax excl.
Uninterruptible power supply (UPS) module for the Jetson Nano, allowing the minicomputer to continue working and shut down safely after a power failure. Uninterruptible power supply included. Waveshare UPS Power Module (EU)
Description
UPS uninterruptible power supply module designed for NVIDIA Jetson Nano. When connected to four 18650-type batteries, it maintains a stable 5V output voltage even after power loss, allowing the device to continue operating and shut down safely. The state of charge of the battery is indicated by built-in LEDs, and full monitoring of the battery status is possible through the I2C interface and the built-in OLED display. It is connected to the Jetson Nano via a 6-pin connector. Full documentation is available on the product wiki page.
Attention!
The kit does not include the 18650 batteries. They must be purchased separately. Batteries with a length of up to 67 mm are suitable for the module.
Features
- I2C communication
- 0.91" OLED to display information such as battery voltage, IP address, RAM usage
- Real-time monitoring of battery voltage, current, power and capacity
- Overcharge/discharge protection circuitry, overcurrent protection, short circuit protection and reverse polarity protection
- Battery warning indicators
- Charging: 8.4 V 2 A
- Power supply: 4 x 18650 battery
- 5 V/2.5 A voltage stabilizer
- 6-pin connector with I2C interface
- Output voltage: 5 V
- Dimensions: 113 x 79 mm
Kit contains
- UPS Power Module (EU)
- AC adapter
- 6-pin 9 cm cable
- Set of screws
1182294
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Astro Carrier base plate attachment designed to work with the NVIDIA Jetson TX2i module. It has HDMI, USB 3.0 and USB 2.0, Ethernet as well as Mini PCIe and mSATA connectors. The overlay is plugged into the plate-to-board connector available on the Astro base plate. Connect Tech XBG206
zł1,692.68
2 weeks
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 4GB or NVIDIA Jetson TX2i modules. It is equipped with an Ethernet connector, microSD, UART, I2C and GPIO interfaces, USB 2.0 OTG, USB 3.0 ports, 4-line MIPI (I-PEX), CAN, HDMI 2.0 connector and a 7-pin SATA connector. Connect Tech ASG016
zł2,190.84
2 weeks
No product available!
Starter Cable Kit for Rogue Carrier. Connect Tech CKG064
zł2,347.98
2 weeks
No product available!
Adapter for NVIDIA Jetson modules to connect the NVIDIA Jetson AGX Xavier module to the NVIDIA Jetson TX1, TX2 and TX2i carrier. Connect Tech AGX001
zł2,471.64
2 weeks
No product available!
Base board for NVIDIA Jetson AGX Xavier modules. Equipped with MIPI CSI-2, NVMe M.2 Key M, HDMI, USB 3.1, Ethernet (RJ-45), CAN Bus and power connector. Connect Tech AGX101
zł7,986.13
2 weeks
No product available!
A two-part metal case with a fan designed to build a set with Orbitty Carrier and NVIDIA Jetson TX1 or NVIDIA Jetson TX2. Connect Tech ENC001+XHG302
zł1,012.65
2 weeks
No product available!
Starter Cable Kit for Spacely Carrier. Connect Tech CKG045
zł790.08
2 weeks
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with MIPI CSI-2 connector, USB OTG, UART and I2C. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG008
zł982.97
2 weeks
No product available!
Starter Cable Kit for Astro Breakout Board. Connect Tech CKG041
zł1,198.11
2 weeks
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. The board is equipped with a Mini PCI Express and mSATA connector, as well as a micro SD card slot. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG001
zł4,012.21
2 weeks
No product available!
Kit for the construction of the intelligent JetBot robot based on Jetson Nano. It consists of a board (module with OLED display, battery basket and motor controller), expansion module with connectors, cameras with Sony IMX219 image sensor, motors, housing and a set of mounting screws. It is also equipped with a 2.4/5 GHz WiFi module and Bluetooth 4.2. Waveshare JetBot AI Kit Accesories
zł495.91
24h
Available quantity: 3
Available
Case made of transparent plastic designed for Nvidia Jetson Nano. It protects the minicomputer against dust and mechanical damage. Waveshare Jetson Nano Case (A)
zł22.96
24h
Available quantity: 10
Available
Dedicated cooling fan for NVIDIA Jetson Nano mini computers. Powered by 5V, controlled by PWM signal. Waveshare Fan-4020-PWM-5V
Regular pricezł17.70zł11.89
24h
Available quantity: 285
Available
Set with camera and wide angle lens. The set is designed to work with the NVIDIA Jetson Nano computer. ArduCAM B0249
zł297.13
24h
Available quantity: 1
Available
Universal case adapted to most popular single-board computers, incl. ODYSSEY-X86J4105, Raspberry Pi, BeagleBone, and Jetson Nano. Seeed Studio 114992152
zł163.25
24h
Available quantity: 3
Available
10.1" LCD IPS display with touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. High resolution 1024x600 pixels. Waveshare 10.1inch HDMI LCD (E)
zł428.41
24h
Available quantity: 5
Available
Uninterruptible power supply (UPS) module for the Jetson Nano, allowing the minicomputer to continue working and shut down safely after a power failure. Uninterruptible power supply included. Waveshare UPS Power Module (EU)