Aluminum heatsink with fan for Jetson Orin NX / Orin Nano / Xavier NX – Seeed Studio 110991904

reServer Industrial J501 GMSL Extension Board enables integration of up to 8 GMSL cameras in vision systems based on the J501 mainboard. With support for GMSL1 and GMSL2 and MIPI CSI output, the board is suitable for advanced industrial and robotic applications requiring simultaneous operation of multiple cameras. Seeed Studio 102991855

The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano

Camera module designed for NVIDIA Jetson Nano/Xavier NX. The camera is equipped with a Sony IMX477 sensor and focus controlled by the I2C interface. ArduCAM B0273

The SIM7600G-H HAT module adds global 4G LTE connectivity and GNSS functions to the Jetson Nano, supporting data transmission, SMS, and voice calls. With UART, USB, and GPIO interfaces and support for AT Commands, it is suitable for IoT projects, remote monitoring systems, and mobile AI applications.

Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 4GB or NVIDIA Jetson TX2i modules. It is equipped with an Ethernet connector, microSD, UART, I2C and GPIO interfaces, USB 2.0 OTG, USB 3.0 ports, 4-line MIPI (I-PEX), CAN, HDMI 2.0 connector and a 7-pin SATA connector. Connect Tech ASG016

Astro Carrier base plate attachment designed to work with the NVIDIA Jetson TX2i module. It has HDMI, USB 3.0 and USB 2.0, Ethernet as well as Mini PCIe and mSATA connectors. The overlay is plugged into the plate-to-board connector available on the Astro base plate. Connect Tech XBG206

Module with IMX298 sensor working with NVIDIA Jetson Nano. The sensor used has a 16 MP matrix and allows you to record video at resolutions of 16MP/30fps. Acrylic case included. ArduCAM B0214

Camera module with IMX219 sensor with a resolution of 8 MP equipped with programmable focus. Designed for NVIDIA Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0181

Metal housing with a camera holder and a hole for a fan. Designed for the NVIDIA Jetson Orin Nano or Jetson Orin NX development kit. Waveshare JETSON-ORIN-CASE-A

The JETSON-ORIN-POE-MODULE offers a compact IEEE 802.3af/at-compliant solution for simultaneous power supply and data transmission in devices based on Jetson Orin Nano and NX. It is ideal for environments where cable minimization and space-saving are essential, such as in industrial applications, robotics, automation, and edge AI systems.

Adapter for NVIDIA Jetson modules to connect the NVIDIA Jetson AGX Xavier module to the NVIDIA Jetson TX1, TX2 and TX2i carrier. Connect Tech AGX001

Sound card in the form of an expansion module with a USB adapter designed for NVIDIA Jetson Nano development kits. Waveshare Audio Card for Jetson Nano

The Seeed Studio 102110719 camera module with a Sony IMX219 sensor supports both 15- and 22-pin CSI connectors, offering high flexibility in optics selection and applications. Designed for Jetson platforms and Raspberry Pi CM4, it is suitable for AI projects, surveillance, and robotics. Seeed Studio 102110719

Uninterruptible power supply (UPS) module for the Jetson Nano, allowing the minicomputer to continue working and shut down safely after a power failure. Uninterruptible power supply included. Waveshare UPS Power Module (EU)

IPS 4" LCD display with touch screen. Equipped with HDMI interface for image display and USB type C and I2C for touch screen. Resolution 720x720 pixels. Waveshare 4inch HDMI LCD (C)

AR0234 sensor module that works with NVIDIA Jetson Nano and Xavier NX kits. The sensor used has a 2.3 MP sensor and allows video recording at 1920×1200@30fps. It is equipped with a global shutter. ArduCAM B0429