ArduCAM High Quality IR-CUT Camera - module with HQ IMX477 camera and lens for Jetson Nano/Xavier NX

Kit for building an intelligent JetBot robot based on Jetson Nano. It consists of an expansion module, camera with Sony IMX219 image sensor, motors, housing and a set of mounting screws. Waveshare JetBot 2GB AI Kit Acce

Base plate for NVIDIA Jetson TX2 / TX2i and Jetson TX1 modules. Equipped with MIPI CSI-2, Mini-PCIe / mSATA extension, HDMI Video, USB 3.0 and 2.0 as well as two serial ports for RS-232/485. Connect Tech ASG002

The Seeed Studio 102110719 camera module with a Sony IMX219 sensor supports both 15- and 22-pin CSI connectors, offering high flexibility in optics selection and applications. Designed for Jetson platforms and Raspberry Pi CM4, it is suitable for AI projects, surveillance, and robotics. Seeed Studio 102110719

A baseboard dedicated to NVIDIA Jetson Xavier NX modules. It offers numerous connectors, including M.2 Key E, M.2 Key M, 40-pin GPIO, Ethernet, USB 3.0, and HDMI and DisplayPort outputs. Waveshare JETSON-IO-BASE-B

Dedicated cooling fan for NVIDIA Jetson Nano mini computers. Powered by 5V, controlled by PWM signal. Waveshare Fan-4020-PWM-5V

The IMX219-160IR camera with an 8 MP sensor and a 160° field of view, designed for Jetson Nano and Xavier NX, provides a wide image and night monitoring capability thanks to two IR LED modules. Dedicated to applications in robotics, AI systems, and computer vision in variable lighting conditions.

Module with minicamera based on IMX219 matrix with 8 MPx operation for Nvidia Jetson Nano, with 300 mm tape. ArduCAM B0185

Kit for the construction of the intelligent JetBot robot based on Jetson Nano. It consists of a board (module with OLED display, battery basket and motor controller), expansion module with connectors, cameras with Sony IMX219 image sensor, motors, housing and a set of mounting screws. It is also equipped with a 2.4/5 GHz WiFi module and Bluetooth 4.2. Waveshare JetBot AI Kit Accesories

Metal case with fan hole and a camera holder. Designed for the NVIDIA Jetson Nano development kit. Jetson Nano Case (C)

Camera module with IMX219 sensor with a resolution of 8 MP equipped with programmable focus. Designed for NVIDIA Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0181

Camera module designed for NVIDIA Jetson Nano/Xavier NX. The camera is equipped with a Sony IMX477 sensor and focus controlled by the I2C interface. ArduCAM B0273

The IMX219-130 camera with a 130° field of view and 8 MP resolution, designed for Jetson Nano and Xavier NX, enables wide field image capture in machine vision and AI projects. Equipped with a MIPI interface, 1.88 mm lens, and IR filter, it provides high image quality with low distortion.

A cooling kit in the form of a fan with an aluminum heat sink dedicated to the minicomputer NVIDIA Jetson Xavier NX. Seeed Studio 114992746

reServer Industrial J501 GMSL Extension Board enables integration of up to 8 GMSL cameras in vision systems based on the J501 mainboard. With support for GMSL1 and GMSL2 and MIPI CSI output, the board is suitable for advanced industrial and robotic applications requiring simultaneous operation of multiple cameras. Seeed Studio 102991855

3.2" IPS LCD Display. It is equipped with an HDMI interface for image display and has a resolution of 480x800 pixels. Waveshare 3.2inch HDMI LCD (H)

AR0234 sensor module that works with NVIDIA Jetson Nano and Xavier NX kits. The sensor used has a 2.3 MP sensor and allows video recording at 1920×1200@30fps. It is equipped with a global shutter. ArduCAM B0429