zł230.55 tax excl.
Camera for Raspberry Pi Compute Module and NVIDIA Jetson Nano. It was equipped with a Sony IMX477 sensor with a resolution of 12.3 MPx and a built-in IR filter. Waveshare IMX477-160 12.3MP Camera
Camera designed for SoM Raspberry Pi Compute Module and NVIDIA Jetson Nano. It was equipped with a Sony IMX477 sensor with a resolution of 12.3 MPx and a built-in IR filter. The camera can mount lenses with CS mount (6mm) and C mount (16mm) using an adapter. The installation and configuration of the camera is very intuitive. It is designed for industrial and consumer applications, such as: monitoring or automatic systems that require the highest video quality. Full documentation is available on the Product Wiki page.
Attention!
The camera can only support Raspberry Pi Compute Module series, cannot be used with Raspberry Pi boards such as Raspberry Pi Model 4B.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Compute Module IO Board Plus is a prototype board that allows you to connect Raspberry Pi CM3 module and CM3L module. It is equipped with numerous GPIO pins, HDMI port, USB ports, camera and display ports. Compute Module IO Board Plus
No product available!
Raspberry Pi Compute Module 3+ (CM3 +) is a SoM module containing key elements of the Raspberry Pi 3 A + / B + computer, including Broadcom BCM2837B0 processor, 1 GB RAM, 8 GB eMMC memory. The module is equipped with a 200-pin SODIMM connector.
No product available!
The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM and 8 GB eMMC. Raspberry Pi CM4001008
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
Camera module with OV5640 sensor with a resolution of 5 MP. Equipped with fisheye lens, it communicates via the SCCB interface. Waveshare OV5640 Camera Board (B)
Camera module with OV5640 sensor with a resolution of 5 MP. It communicates via the SCCB interface. Waveshare OV5640 Camera Board (A)
Camera module with OV5640 sensor with a resolution of 5 MP. Equipped with auto focus and flash LED, it communicates via the SCCB interface. Waveshare OV5640 Camera Board (C)
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero V1.3 and Zero W. Equipped with a lens with a viewing angle of 70°. Waveshare RPi Zero V1.3 Camera
8 MPx camera module with IMX219 sensor and wide-angle lens. To be used as a replacement on the RPI Camera Board V2. Waveshare IMX219-D160
No product available!
Camera with a resolution of 2 MPx with a USB interface in a metal case. Equipped with CMOS IMX291 sensor with "Fisheye" lens with 175° viewing angle and microphone. ArduCAM B026101
No product available!
Camera with a USB interface with a resolution of 16 MPx in a metal housing. Equipped with a Sony CMOS IMX298 sensor and a wide-angle lens with a viewing angle of 105°. ArduCAM B026801
No product available!
Camera with a resolution of 8 MPx with a USB interface. Equipped with CMOS IMX179 sensor with 105° lens, microphone and housing. ArduCAM UB022901
No product available!
Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 127° angle of view. Waveshare IMX462-127 2MP Starlight Camera
Module with a camera with a resolution of 2 MP OV2640 and a Himax HX6537-A processor. Dedicated to applications that use artificial intelligence in image processing. Seeed Studio 114992866
Set with a camera with a resolution of 108 MP, USB 3.0 adapter and a cable. ArduCAM EK030
No product available!
Module with a 64 MP camera designed for Raspberry Pi minicomputers. Equipped with autofocus and 10x digital zoom. ArduCAM B0399
A set with a 64 MP camera and an adapter enabling the transmission of the CSI signal via an HDMI cable. Designed for Raspberry Pi and Jetson Nano minicomputers. The adapter module is also equipped with an audio connector and allows you to connect a microphone and headphones. ArduCAM B0399B0091
A set with a 64 MP camera and a 2 DOF control platform designed for Raspberry Pi minicomputers. The camera has an integrated IR filter and autofocus. The control platform is based on two digital servos that allow you to control the position of the camera in two dimensions. ArduCAM B0399B0283
No product available!
2 MP camera module with OV2311 sensor, compatible with Raspberry Pi. Without IR filter, equipped with shutter and M12 lens mount. Acrylic housing included. ArduCAM B0381
Camera module with OV5647 sensor with a resolution of 5 MP and optical image stabilization. Works with all versions of the Raspberry Pi. Waveshare OV5647-70 5MP OIS Camera
No product available!
Camera for Raspberry Pi Compute Module and NVIDIA Jetson Nano. It was equipped with a Sony IMX477 sensor with a resolution of 12.3 MPx and a built-in IR filter. Waveshare IMX477-160 12.3MP Camera