zł81.51 tax excl.
Uninterruptible power supply module for Jetson Nano, allowing to continue operation and safe shutdown of the minicomputer after a power failure. AC adapter included. Waveshare UPS Power Module (B) (EU)
UPS module for NVIDIA Jetson Nano. After connecting four 18650 batteries, it maintains a stable output voltage of 5 V even after a power loss, which allows the device to continue operating and safely shut down. The battery charge status is indicated by built-in LEDs, and full battery status monitoring is possible thanks to the I2C interface. It is connected to the Jetson Nano via pogo pins. Full documentation is available on the product Wiki page.
Attention!
The kit does not include the 18650 batteries. They must be purchased separately. Batteries with a length of up to 67 mm are suitable for the module.

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
18650 Li-Ion battery with a nominal voltage of 3.7V and a capacity of 3000mAh. Sony US18650VTC6
Li-Ion battery type 18650 with a nominal voltage of 3.6 V and a capacity of 3000 mAh. Samsung INR18650-30Q
Uninterruptible power supply module for Raspberry Pi, which allows you to continue work and safely shut down the microcomputer after a power failure. AC adapter included. Waveshare UPS HAT (B) (EU)
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
No product available!
Module with IMX298 sensor working with NVIDIA Jetson Nano. The sensor used has a 16 MP matrix and allows you to record video at resolutions of 16MP/30fps. Acrylic case included. ArduCAM B0214
Kit containing a module with two cameras with a sensor OV5647 with a resolution of 5 MP and an expansion module for NVIDIA Jetson Nano. ArduCAM B0217J5
Camera module with IMX219 sensor with a resolution of 8 MP equipped with programmable focus. Designed for NVIDIA Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0181
Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a viewing angle of 62° and a 30 cm extension cord. ArduCAM B0320
No product available!
Uninterruptible power supply module for Jetson Nano, allowing to continue operation and safe shutdown of the minicomputer after a power failure. AC adapter included. Waveshare UPS Power Module (B) (EU)
No product available!
3.2" IPS LCD Display. It is equipped with an HDMI interface for image display and has a resolution of 480x800 pixels. Waveshare 3.2inch HDMI LCD (H)
IPS 10.1" LCD display with touch screen. Equipped with HDMI interface for image display and USB for touch screen operation. Resolution 1920x1200 pixels. Waveshare 10.1inch HDMI LCD (G) (with case) (EU)
A cooling kit in the form of a fan with an aluminum heat sink dedicated to the minicomputer NVIDIA Jetson Xavier NX. Seeed Studio 114992746
10.5" AMOLED display with touch screen. Equipped with HDMI interface for image display and USB for touch screen. Has a resolution of 2560x1600 pixels. US Plug. Waveshare 10.5inch HDMI AMOLED
No product available!
IPS 4" LCD display with touch screen. Equipped with HDMI interface for image display and USB type C and I2C for touch screen. Resolution 720x720 pixels. Waveshare 4inch HDMI LCD (C)
Base board dedicated to NVIDIA Jetson Nano modules. It offers numerous connectors, including M.2 Key E, 40-pin GPIO, Ethernet, USB 3.0, and HDMI and DisplayPort outputs. Waveshare JETSON-IO-BASE-A
Dedicated heat sink for NVIDIA Jetson Nano minicomputers. Waveshare NANO-HEATSINK
Cooling fan dedicated to the minicomputer NVIDIA Jetson Xavier NX. Waveshare NX-FAN-PWM
1 MP camera with USB interface. Equipped with a wide-angle lens with a viewing angle of 140°. DFRobot FIT0892
No product available!
Expansion module with an industrial interface RS485 and CAN dedicated to minicomputers NVIDIA Jetson Nano. Equipped with protection and electrical insulation. Waveshare RS485 CAN for Jetson Nano
Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 127° angle of view. Waveshare IMX462-127 2MP Starlight Camera
No product available!
Uninterruptible power supply module for Jetson Nano, allowing to continue operation and safe shutdown of the minicomputer after a power failure. AC adapter included. Waveshare UPS Power Module (B) (EU)