UPS HAT (B) (EU) with UPS for Raspberry Pi - Waveshare 20568
ID: 587376
5906623426003
zł105.42
Tax included
zł85.71 tax excl.
Uninterruptible power supply module for Raspberry Pi, which allows you to continue work and safely shut down the microcomputer after a power failure. AC adapter included. Waveshare UPS HAT (B) (EU)
Description
Uninterruptible power supply module designed for Raspberry Pi. The power supply, after connecting two 18650 batteries, maintains a stable output voltage of 5 V even after the loss of power, which allows the device to continue operating and safely shut down. The battery charge status is indicated by built-in LEDs, and full battery status monitoring is possible thanks to the I2C interface. It is connected to the Raspberry Pi via a pogo pins. Full documentation is available on the product Wiki page.
Attention!
The kit does not include the 18650 batteries. They must be purchased separately. Batteries with a length of up to 67 mm are suitable for the module.
Features
- I2C communication
- Real-time monitoring of battery voltage, current, power and capacity
- Overcharge / discharge protection circuits, overcurrent protection, short circuit protection and reverse polarity protection
- Battery warning indicators
- Charging: 8.4V 2A
- Power supply: 2 x 18650 battery
- 5 V / 5 A voltage stabilizer
- Voltage stabilizer 3.3 V
- Pogo pins with I2C interface
- Output voltage: 5V
- Dimensions: 56 x 85 mm
Kit contains
- UPS HAT (EU) module
- AC adapter
- Protective plate
- A set of screws
587376
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Uninterruptible power supply module for Raspberry Pi, allowing you to continue working and safely turn off the microcomputer after a power failure. DFRobot DFR0494
zł77.80
24h
Available quantity: 1
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
24h
Available quantity: 148
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł252.90
Delivery date unknown
No product available!
18650 Li-Ion battery with a nominal voltage of 3.7V and a capacity of 3000mAh. Sony US18650VTC6
zł36.64
24h
Available quantity: 19
Available
UPS HAT for Raspberry Pi minicomputers. serves to provide a constant power supply when the power supply of the minicomputer is turned off, so you can avoid damage to the system and ensure a safe shutdown. DFRobot DFR0528
zł133.01
24h
Available quantity: 2
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł348.90
24h
Available quantity: 119
Available
Li-Ion battery type 18650 with a nominal voltage of 3.6 V and a capacity of 3000 mAh. Samsung INR18650-30Q
zł33.60
24h
Available quantity: 32
Available
Uninterruptible power supply module for Raspberry Pi, which allows you to continue work and safely shut down the microcomputer after a power failure. Waveshare UPS HAT (EU)
zł85.17
24h
Available quantity: 6
Available
Other products in the same category (16)
HAT PoE shield for Raspberry Pi. It allows you to use the PoE interface to power the minicomputer via an Ethernet cable. ArduCAM U6241
zł119.00
24h
Available quantity: 5
Available
Uninterruptible power supply module for Raspberry Pi, which allows you to continue work and safely shut down the microcomputer after a power failure. Waveshare UPS HAT (EU)
zł85.17
24h
Available quantity: 6
Available
Improved version of the official HAT module, designed to power Raspberry Pi 4 and Raspberry Pi 3B + via Ethernet (PoE) cable. The use of the module eliminates the need for a separate power supply and reduces the number of cables needed. Raspberry Pi SC1022
zł105.01
24h
Available quantity: 235
Available
Overlay with Li-po battery management module for Raspberry Pi minicomputers. It integrates the SW6106 power management system, enables the provision of regulated 5V power supply. Waveshare Li-polymer Battery HAT
zł84.05
24h
Available quantity: 6
Available
Power management module designed for the Raspberry Pi. Equipped with a microUSB connector and a minicomputer power supply button. Pimoroni PIM269
zł38.90
24h
Available quantity: 2
Available
HAT PoE overlay for Raspberry Pi. Allows you to use the Power over Ethernet interface to power a minicomputer via an RJ45 connector. Waveshare PoE HAT (E)
zł60.15
24h
Available quantity: 10
Available
PoE power supply module designed for Raspberry Pi 3B + and 4B. It allows you to use the PoE interface to power the Raspberry Pi via an Ethernet cable, eliminating the need for a separate power supply. Waveshare PoE HAT (B)
zł78.47
24h
Available quantity: 10
Available
HAT for powering over Ethernet (PoE) for Raspberry Pi. It allows you to use the PoE interface to power the minicomputer via an Ethernet cable
zł113.90
6 weeks
No product available!
HAT adapter for PoE supply for Raspberry Pi 3B+ and Raspberry Pi 4B. It allows you to use the PoE interface to power the Raspberry Pi via an Ethernet cable, eliminating the need for a separate power supply. Uctronics U6110
zł197.18
24h
Available quantity: 4
Available
Uninterruptible power supply module for Raspberry Pi Zero, which allows you to continue work and safely shut down the microcomputer after a power failure. UPS Lite V1.0
zł136.85
24h
Available quantity: 1
Available
PoE adapter for Raspberry Pi 5 that provides direct power over Ethernet, compliant with IEEE 802.3af/at standards. It features a metal heatsink and a powerful fan to efficiently dissipate heat, and supports PCI-E×1 Gen2 and Gen3 modes, enabling fast data transfer on M.2 drives of various sizes. Additionally, the adapter offers 5V at 4.5A output on GPIO and 12V at 2A on the 2-pin connector, allowing you to power additional devices, making it ideal for IoT and networking applications that require reliability. Waveshare POE M.2 HAT+
zł97.96
24h
Available quantity: 5
Available
UPS module that ensures uninterrupted operation of Raspberry Pi 5 by automatically switching between external and battery power. With fast charging function, power failure detection and the ability to control the system via software, it is an ideal choice for mobile applications such as smart vehicles or monitoring systems. Its design allows for easy integration with Raspberry Pi 5 without interfering with other HATs, and built-in LED indicators provide a convenient view of the working status and charge level. DFRobot FIT0992
zł285.58
4 weeks
No product available!
PoE power supply module designed for Raspberry Pi 3B+ and 4B. It allows you to use the PoE interface to power the Raspberry Pi via an Ethernet cable, eliminating the need for a separate power supply. Waveshare PoE HAT (C)
zł80.33
24h
Available quantity: 11
Available
UPS uninterruptible power supply module for Raspberry Pi Zero, allowing the microcomputer to continue working and shut down safely after a power failure. Comes with a battery pack. Waveshare UPS HAT (C)
zł109.79
4 weeks
No product available!
Uninterruptible power supply module for Raspberry Pi, allowing you to continue working and safely turn off the microcomputer after a power failure. DFRobot DFR0494
zł77.80
24h
Available quantity: 1
Available
HAT for powering over Ethernet (PoE) for Raspberry Pi. It allows you to use the PoE interface to power the minicomputer via an Ethernet cable
zł62.29
6 weeks
No product available!
Uninterruptible power supply module for Raspberry Pi, which allows you to continue work and safely shut down the microcomputer after a power failure. AC adapter included. Waveshare UPS HAT (B) (EU)