reServer Industrial J501 – GMSL Extension Board – Seeed Studio 102991855
ID: 1200436
5902186317802
zł715.45
Tax included
zł581.67 tax excl.
reServer Industrial J501 GMSL Extension Board enables integration of up to 8 GMSL cameras in vision systems based on the J501 mainboard. With support for GMSL1 and GMSL2 and MIPI CSI output, the board is suitable for advanced industrial and robotic applications requiring simultaneous operation of multiple cameras. Seeed Studio 102991855
Description
The GMSL extension board for reServer Industrial J501 enables simultaneous connection of up to 8 GMSL cameras. The module uses the MAX96724 deserializer, supporting both GMSL1 and GMSL2, and transmits image data through the MIPI CSI interface. This solution is dedicated to industrial applications and vision systems where simultaneous image capture from multiple cameras with low latency is required.
Properties
- Compatibility: reServer Industrial J501 Carrier Board
- Support for up to 8 GMSL cameras
- Support for GMSL1 and GMSL2
- Deserializer: MAX96724RGTNV
- Image output: MIPI CSI (4-lane from each deserializer, total 8 lanes)
- Dimensions: 103 × 45 mm
- Weight: 47 g
- Operating temperature: -20°C to 60°C
Included
- reServer Industrial J501 GMSL Extension Board ×1
- Standoffs ×4
- Mounting screws ×8
1200436
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
A set of accessories for building an autonomous racing robot based on the popular NVIDIA Jetson Nano development kit. Waveshare JetRacer AI Kit Acce
zł1,175.49
24h
Available quantity: 1
Available
A set with four OV9281 cameras with a resolution of 1MP and an expansion module for Raspberry Pi, Jetson Nano and Xavier NX, which allows you to simultaneously connect four cameras to the minicomputer. ArduCAM B0267
zł1,544.72
4 weeks
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with a USB 3.0, USB 2.0 OTG, HDMI, GbE connector, as well as a micro SD card slot. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG003
zł1,433.02
2 weeks
No product available!
A set with two OV9281 cameras with a resolution of 1MP and an expansion module for Raspberry Pi, Jetson Nano and Xavier NX, which allows you to simultaneously connect two cameras to the minicomputer. ArduCAM B0266
zł1,030.92
4 weeks
No product available!
An 8MP camera designed to work with NVIDIA Jetson boards, as well as other systems such as ARM, DSP, and FPGA, offering a wide field of view and high image quality. The camera is very sensitive to infrared light due to the lack of an IR filter, which allows it to be used in applications such as night vision systems, heat detection, and robotic vision systems. ArduCAM B0193
zł144.51
4 weeks
No product available!
The IMX219-130 camera with a 130° field of view and 8 MP resolution, designed for Jetson Nano and Xavier NX, enables wide field image capture in machine vision and AI projects. Equipped with a MIPI interface, 1.88 mm lens, and IR filter, it provides high image quality with low distortion.
zł106.12
4 weeks
No product available!
5G/4G/3G and GNSS module with SIM8202G-M2 chip. It allows you to make phone calls, SMS support, cloud communication and has support for GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare SIM8202G-M2 5G for Jetson Nano (EU)
zł1,487.92
4 weeks
No product available!
3.2" IPS LCD Display. It is equipped with an HDMI interface for image display and has a resolution of 480x800 pixels. Waveshare 3.2inch HDMI LCD (H)
zł138.07
24h
Available quantity: 2
Available
3D stereo camera module, which was built of two cameras with OV2311 sensor. Designed to work with Raspberry Pi, Jetson Nano and Xavier NX. ArduCAM B0264
zł1,161.45
4 weeks
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with MIPI CSI-2 connector, USB OTG, UART and I2C. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG008
zł982.97
2 weeks
No product available!
Uninterruptible power supply module for Jetson Nano, allowing to continue operation and safe shutdown of the minicomputer after a power failure. AC adapter included. Waveshare UPS Power Module (B) (EU)
zł100.26
24h
Available quantity: 4
Available
Astro Carrier base plate attachment designed to work with the NVIDIA Jetson TX2i module. It has HDMI, USB 3.0 and USB 2.0, Ethernet as well as Mini PCIe and mSATA connectors. The overlay is plugged into the plate-to-board connector available on the Astro base plate. Connect Tech XBG206
zł1,692.68
2 weeks
No product available!
Cooling fan dedicated to the minicomputer NVIDIA Jetson TX2 NX. Waveshare TX2-FAN-PWM
zł54.55
24h
Available quantity: 1
Available
Camera module designed for NVIDIA Jetson Nano/Xavier NX. The camera is equipped with a Sony IMX477 sensor and focus controlled by the I2C interface. ArduCAM B0273
zł423.69
24h
Available quantity: 1
Available
Starter Cable Kit for Rogue Carrier. Connect Tech CKG064
zł2,347.98
2 weeks
No product available!
ArduCAM High Quality IR-CUT Camera - module with HQ IMX477 camera and lens for Jetson Nano/Xavier NX
Camera module designed for NVIDIA Jetson Nano/Xavier. The camera is equipped with a Sony IMX477 sensor with a lens and an IR-CUT filter. ArduCAM B0274
zł374.78
24h
Available quantity: 1
Available
reServer Industrial J501 GMSL Extension Board enables integration of up to 8 GMSL cameras in vision systems based on the J501 mainboard. With support for GMSL1 and GMSL2 and MIPI CSI output, the board is suitable for advanced industrial and robotic applications requiring simultaneous operation of multiple cameras. Seeed Studio 102991855