RS485 and CAN interface module for Jetson Nano - Waveshare 22026
ID: 1180720
22026
zł93.53
Tax included
zł76.04 tax excl.
Expansion module with an industrial interface RS485 and CAN dedicated to minicomputers NVIDIA Jetson Nano. Equipped with protection and electrical insulation. Waveshare RS485 CAN for Jetson Nano
Description
Expansion module with an industrial interface RS485 and CAN dedicated to minicomputers NVIDIA Jetson Nano. It uses the CAN MCP2515 controller communicating via the SPI interface and the SIT65HVD230DR transceiver and the SP3485 transceiver for communication within the RS485 bus.
The module has built-in anti-electrostatic and overvoltage protection and a digital insulation system.
The board connects to Jetson Nano via a 40-pin GPIO connector, but the board can also connect to other development boards. It can be used in industrial priming applications. Full documentation and examples of use are available on the product page.
Features
- 40-pin GPIO connector, direct connection to Jetson Nano
- Built-in CAN MCP2515 controller via SPI interface and SIT65HVD230DR transceiver
- RS485 communication controlled by UART, built-in SP3485 transceiver
- TVS (Transient Voltage Suppressor) protection, effectively suppresses overvoltages
- Built-in digital isolation system
- Control pins, enabling cooperation with other boards
- Power supply: 3.3 V
- Dimensions: 100 x 79 mm
Kit contains
- RS485 CAN for Jetson Nano
- A set of screws
1180720
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
NVIDIA module with ARM Cortex A57 1.43GHz CPU and Maxwell graphics chip consisting of 128 cores supporting CUDA technology. The module has DDR4 4GB RAM memory. NVIDIA Jetson Nano Module
zł682.61
24h
Available quantity: 1
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł975.01
24h
Available quantity: 1
Available
Other products in the same category (16)
1 MPx camera module with OV9281 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount, it is characterized by good sensitivity. ArduCAM B0223
zł311.17
24h
Available quantity: 4
Available
Module with IMX298 sensor working with NVIDIA Jetson Nano. The sensor used has a 16 MP matrix and allows you to record video at resolutions of 16MP/30fps. Acrylic case included. ArduCAM B0214
zł457.77
24h
Available quantity: 1
Available
Kit containing a module with two cameras with a sensor OV5647 with a resolution of 5 MP and an expansion module for NVIDIA Jetson Nano. ArduCAM B0217J5
zł605.68
24h
Available quantity: 1
Available
Camera module with IMX219 sensor with a resolution of 8 MP equipped with programmable focus. Designed for NVIDIA Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0181
zł108.20
24h
Available quantity: 1
Available
Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a viewing angle of 62° and a 30 cm extension cord. ArduCAM B0320
zł249.25
4 weeks
No product available!
Uninterruptible power supply module for Jetson Nano, allowing to continue operation and safe shutdown of the minicomputer after a power failure. AC adapter included. Waveshare UPS Power Module (B) (EU)
zł100.26
4 weeks
No product available!
3.2" IPS LCD Display. It is equipped with an HDMI interface for image display and has a resolution of 480x800 pixels. Waveshare 3.2inch HDMI LCD (H)
zł135.79
24h
Available quantity: 2
Available
IPS 10.1" LCD display with touch screen. Equipped with HDMI interface for image display and USB for touch screen operation. Resolution 1920x1200 pixels. Waveshare 10.1inch HDMI LCD (G) (with case) (EU)
zł542.06
24h
Available quantity: 2
Available
A cooling kit in the form of a fan with an aluminum heat sink dedicated to the minicomputer NVIDIA Jetson Xavier NX. Seeed Studio 114992746
zł136.31
24h
Available quantity: 5
Available
10.5" AMOLED display with touch screen. Equipped with HDMI interface for image display and USB for touch screen. Has a resolution of 2560x1600 pixels. US Plug. Waveshare 10.5inch HDMI AMOLED
zł884.23
24h
Available quantity: 1
Available
IPS 4" LCD display with touch screen. Equipped with HDMI interface for image display and USB type C and I2C for touch screen. Resolution 720x720 pixels. Waveshare 4inch HDMI LCD (C)
zł268.30
24h
Available quantity: 5
Available
Base board dedicated to NVIDIA Jetson Nano modules. It offers numerous connectors, including M.2 Key E, 40-pin GPIO, Ethernet, USB 3.0, and HDMI and DisplayPort outputs. Waveshare JETSON-IO-BASE-A
zł202.51
24h
Available quantity: 2
Available
Dedicated heat sink for NVIDIA Jetson Nano minicomputers. Waveshare NANO-HEATSINK
zł30.49
24h
Available quantity: 4
Available
Cooling fan dedicated to the minicomputer NVIDIA Jetson Xavier NX. Waveshare NX-FAN-PWM
zł58.62
24h
Available quantity: 1
Available
1 MP camera with USB interface. Equipped with a wide-angle lens with a viewing angle of 140°. DFRobot FIT0892
zł95.09
4 weeks
No product available!
Expansion module with an industrial interface RS485 and CAN dedicated to minicomputers NVIDIA Jetson Nano. Equipped with protection and electrical insulation. Waveshare RS485 CAN for Jetson Nano
zł93.53
24h
Available quantity: 1
Available
Expansion module with an industrial interface RS485 and CAN dedicated to minicomputers NVIDIA Jetson Nano. Equipped with protection and electrical insulation. Waveshare RS485 CAN for Jetson Nano