3D stereo camera module, which was built of two cameras with a monochrome OV2311 sensor. The sensor used has a matrix with a resolution of 2 MP and a viewing angle of 83°. The module is attached to the evaluation kit through a dedicated socket and FPC cable, and uses the MIPI-CSI interface specially designed to work with cameras. The kit is designed for Raspberry Pi, Jetson Nano and Xavier NX development kits and allows you to implement AI vision applications, such as deep vision and stereo vision or SLAM algorithms. The kit includes documentation for the camera configuration with Raspberry Pi and NVIDIA Jetson kits and 15-pin tape for connecting the camera to the Raspberry Pi model B/A and Jetson Nano, and a 22-pin tape for the Raspberry Pi Zero 2W and the Compute module.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
3D stereo camera module, which was built of two cameras with OV2311 sensor. Designed to work with Raspberry Pi, Jetson Nano and Xavier NX. ArduCAM B0264
No product available!
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
A development kit dedicated to creating modern solutions based on artificial intelligence. It consists of a Jetson Orin Nano Super 8GB module and a base board that can connect to all versions of Orin Nano and Orin NX modules. It is an ideal platform for creating prototypes of next-generation edge-AI products. NVIDIA 945-13766-0005-000
Camera for Raspberry Pi minicomputers. Works with all versions of minicomputers with a CSI socket. The camera is equipped with a Sony IMX477R sensor with a resolution of 12.3MPx and a built-in IR filter. Raspberry Pi HQ Camera
The 8MP NoIR camera is designed for low-light conditions and complete darkness. Utilizing a Sony IMX219 sensor without an IR filter, it captures images in infrared light, ideal for nighttime surveillance or wildlife observation. Compatible with the Raspberry Pi and equipped with a CSI connector, it provides high image quality and full support for standard resolutions and video modes. ArduCAM B0395
Camera for Raspberry Pi CM3, CM3+ and NVIDIA Jetson Nano. It was equipped with a Sony IMX477R sensor with a resolution of 12.3MPx and a built-in IR filter. Waveshare IMX477 12.3MP Camera
Image recognition sensor with built-in deep learning engine. The small module is equipped with an Omnivision OV7725 camera and various image recognition algorithms. Communication with the module is via the I2C and UART interface, as well as WiFi. DFRobot SEN0314
OV7725 based on Omnivision OV7725 image sensor; low voltage CMOS device provides the full functionality of a single-chip VGA camera and image processor as well as the extraordinary high frame rate and low light performance. It provides full-frame, sub-sampled or windowed 8-bit/10-bit images in a wide range of formats, controlled through the Serial Camera Control Bus (SCCB) interface. ArduCAM U3182
Camera module with OV5647 sensor that works with Raspberry Pi. It has an integrated IR filter and a Fisheye lens with a 220° viewing angle. ArduCAM B0428
A compact 8MP USB camera module with an autofocus lens and built-in microphone. Based on the Sony IMX219 sensor, it captures 3280 x 2464 px video at 30 FPS, providing detailed image and sound in a single device. UVC compliance and a wide 62° field of view make it ideal for VR, surveillance, microscopy, and embedded applications without the need for additional drivers. ArduCAM B0431
1 MPx camera module with OV9281 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter and an IR filter, it is characterized by good sensitivity. Waveshare OV9281-120 Camera
This kit includes four 16MP IMX519 cameras and a baseboard for the Raspberry Pi and NVIDIA Jetson AGX Orin, Orin Nano, and Orin NX platforms. The cameras are equipped with a Sony IMX519 sensor with autofocus that works in manual, automatic, and continuous modes, offering complete control over image sharpness. With single, dual, and quad modes, the kit is ideal for robotics, surveillance, and advanced computer vision systems, ensuring synchronization and high image quality. ArduCAM B0388
Camera module with Sony IMX219 sensor works with all versions of Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx, the maximum video resolution is 1080p. ArduCAM B0103
No product available!
The IMX296 1.58MP camera module with Global Shutter eliminates motion-related image distortion, making it ideal for dynamic applications like machine vision and AI systems. The camera features an M12 lens with a 45° field of view and manual focus, and supports RAW10 format and 1440x1080 video recording at 60 frames per second. Compatible with the Raspberry Pi and working with the libcamera and Picamera2 libraries, it\'s easy to integrate thanks to the included FPC ribbon cables and compact design. ArduCAM B0445
A set with four cameras equipped with IMX219 sensors with a resolution of 8 MPx and an adapter for Raspberry Pi minicomputers. ArduCAM B0178
Camera with OV7251 CMOS sensor with a resolution of 640x480 px. Equipped with a snapshot, it communicates via 1-lane MIPI interface. ArduCAM U6070
Thermal-45 Camera ESP32 Module is a precise thermal imaging camera with a 45° field of view, enabling temperature distribution capture in a narrow field. Thanks to integration with ESP32-S3, wireless connectivity, and battery power option, it is suitable for mobile applications and measurement systems.
No product available!
Module with two GC0328 cameras designed to work with Sipeed MAix kits. The set has been designed for AI and stereo vision applications. Seeed Studio 114991702
Raspberry Pi Camera Module, Fisheye Lens, Wider Field of View. Waveshare RPi Camera (J)
3D stereo camera module, which was built of two cameras with OV2311 sensor. Designed to work with Raspberry Pi, Jetson Nano and Xavier NX. ArduCAM B0264