NANO-HEATSINK heatsink for NVIDIA Jetson Nano - Waveshare 21599

1 MP camera with USB interface. Equipped with a wide-angle lens with a viewing angle of 140°. DFRobot FIT0892

Base board for NVIDIA Jetson AGX Xavier modules. Equipped with MIPI CSI-2, NVMe M.2 Key M, HDMI, USB 3.1, Ethernet (RJ-45), CAN Bus and power connector. Connect Tech AGX101

Kit for building an intelligent JetBot robot based on Jetson Nano. It consists of an expansion module, camera with Sony IMX219 image sensor, motors, housing and a set of mounting screws. Waveshare JetBot 2GB AI Kit Acce

Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with a USB 3.0, USB 2.0 OTG, HDMI, GbE connector, as well as a micro SD card slot. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG003

Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a viewing angle of 62° and a 30 cm extension cord. ArduCAM B0320

5.5" AMOLED display with touch screen. Equipped with HDMI interface for image display and USB for touch screen. Resolution 1920x1080 pixels. Waveshare 5.5inch HDMI AMOLED

Metal case with fan hole and a camera holder. Designed for the NVIDIA Jetson Nano development kit. Jetson Nano Case (C)

Module with minicamera based on IMX219 matrix with 8 MPx operation for Nvidia Jetson Nano, with 300 mm tape. ArduCAM B0185

2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount. Acrylic housing included. ArduCAM B0221

Mini base board dedicated to NVIDIA Jetson Nano modules. It offers basic connectors, including M.2 Key B, 40-pin GPIO, Ethernet, USB, CSI and HDMI output. It has compact dimensions, making it ideal for projects with limited space. Waveshare JETSON NANO MINI (EU)

10.1" LCD IPS display with touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. High resolution 1024x600 pixels. Waveshare 10.1inch HDMI LCD (E)

A set with two IMX477 cameras with a resolution of 12 MP and an expansion module for Jetson Nano and Xavier NX, which allows you to simultaneously connect two cameras to the minicomputer. ArduCAM B0265N

Uninterruptible power supply (UPS) module for the Jetson Nano, allowing the minicomputer to continue working and shut down safely after a power failure. Uninterruptible power supply included. Waveshare UPS Power Module (EU)

Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and Raspberry Pi Compute Module, RDK X3, VisionFive2, etc. It is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 200°. Waveshare IMX219-200 Camera

The Seeed Studio 102110719 camera module with a Sony IMX219 sensor supports both 15- and 22-pin CSI connectors, offering high flexibility in optics selection and applications. Designed for Jetson platforms and Raspberry Pi CM4, it is suitable for AI projects, surveillance, and robotics. Seeed Studio 102110719

The IMX219-77 camera with an 8 MP Sony sensor and a 77° field of view, designed for Jetson Nano and Xavier NX, enables advanced projects in machine vision and AI. It features low distortion, an MIPI connector, and high image quality in a compact size.