zł243.09 tax excl.
Base board dedicated to NVIDIA Jetson Nano modules. It offers numerous connectors, including M.2 Key E, 40-pin GPIO, Ethernet, USB and HDMI output. Waveshare JETSON-IO-BASE-LITE
Base board dedicated to NVIDIA Jetson Nano modules. It offers numerous connectors, including M.2 Key E, 40-pin GPIO with I2C, SPI, UART and I2S interfaces, a Gigabit Ethernet port, one USB 3.2, two USB 2.0 and one micro USB, as well as a MIPI CSI camera input - 2 and HDMI video output.

| 1. Main module socket | 9. Gigabit Ethernet |
| 2. microSD | 10. 2 x USB 2.0 |
| 3. M.2 Key E | 11. USB 3.2 Gen 1 |
| 4. Fan connector 1,25mm | 12. HDMI |
| 5. PoE pins | 13. USB typu C |
| 6. 40-pin GPIO | 14. PWR button |
| 7. Fan connector 2,54mm | 15. RST button |
| 8. Micro USB | 16. MIPI CSI |
The board is a good base for prototyping devices based on NVIDIA modules. Compared to the original baseplate used in the NVIDIA Jetson Nano B01 Development Kit, Waveshare has made several changes:
Full documentation with configuration examples are available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Case made of transparent plastic designed for Nvidia Jetson Nano. It protects the minicomputer against dust and mechanical damage. Waveshare Jetson Nano Case (A)
NVIDIA module with ARM Cortex A57 1.43GHz CPU and Maxwell graphics chip consisting of 128 cores supporting CUDA technology. The module has DDR4 4GB RAM memory. NVIDIA Jetson Nano Module
No product available!
Dedicated cooling fan for NVIDIA Jetson Nano mini computers. Powered by 5V, controlled by PWM signal. Waveshare Fan-4020-PWM-5V
Metal case with fan hole and a camera holder. Designed for the NVIDIA Jetson Nano development kit. Jetson Nano Case (C)
No product available!
5" LCD TFT display with touch screen. The display is equipped with HDMI and VGA interface for image display and USB for touch screen. Resolution 800x480 pixels. Waveshare 5inch HDMI LCD (H)
Camera module with IMX219 sensor with a resolution of 8 MP equipped with programmable focus. Designed for NVIDIA Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0181
Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and Raspberry Pi Compute Module, RDK X3, VisionFive2, etc. It is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 200°. Waveshare IMX219-200 Camera
Base plate for NVIDIA Jetson TX2 / TX2i and Jetson TX1 modules. Equipped with MIPI CSI-2, Mini-PCIe / mSATA extension, HDMI Video, USB 3.0 and 2.0 as well as two serial ports for RS-232/485. Connect Tech ASG002
No product available!
5.5" AMOLED display with touch screen. Equipped with HDMI interface for image display and USB for touch screen. Resolution 1920x1080 pixels. Waveshare 5.5inch HDMI AMOLED
The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano
1 MPx camera module with OV9281 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount, it is characterized by good sensitivity. ArduCAM B0223
No product available!
2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount. Acrylic housing included. ArduCAM B0221
Kit for building an intelligent JetBot robot based on Jetson Nano. It consists of an expansion module, camera with Sony IMX219 image sensor, motors, housing and a set of mounting screws. Waveshare JetBot 2GB AI Kit Acce
Uninterruptible power supply (UPS) module for the Jetson Nano, allowing the minicomputer to continue working and shut down safely after a power failure. Uninterruptible power supply included. Waveshare UPS Power Module (EU)
No product available!
Dedicated cooling fan for NVIDIA Jetson Nano mini computers. Powered by 5V, controlled by PWM signal. Waveshare Fan-4020-PWM-5V
Module with IMX298 sensor working with NVIDIA Jetson Nano. The sensor used has a 16 MP matrix and allows you to record video at resolutions of 16MP/30fps. Acrylic case included. ArduCAM B0214
The IMX219-77 camera with an 8 MP Sony sensor and a 77° field of view, designed for Jetson Nano and Xavier NX, enables advanced projects in machine vision and AI. It features low distortion, an MIPI connector, and high image quality in a compact size.
No product available!
Universal case adapted to most popular single-board computers, incl. ODYSSEY-X86J4105, Raspberry Pi, BeagleBone, and Jetson Nano. Seeed Studio 114992152
Metal housing with a camera holder and a hole for a fan. Designed for the NVIDIA Jetson Orin Nano or Jetson Orin NX development kit. Waveshare JETSON-ORIN-CASE-A
10.5" AMOLED display with touch screen. Equipped with HDMI interface for image display and USB for touch screen. Has a resolution of 2560x1600 pixels. US Plug. Waveshare 10.5inch HDMI AMOLED
Base board dedicated to NVIDIA Jetson Nano modules. It offers numerous connectors, including M.2 Key E, 40-pin GPIO, Ethernet, USB and HDMI output. Waveshare JETSON-IO-BASE-LITE