

zł56.09 tax excl.
The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano
Module with electromechanical relays designed to work with NVIDIA Jetson Nano. It is equipped with three 5A / 250VAC relays controlled by digital outputs, and the relay contacts are led out to the ARK screw terminals. The module connects to the minicomputer via a 40-pin GPIO connector. The set includes an acrylic pad isolating the plate from Jetson Nano. The module uses optocouplers that prevent interference from high voltage circuits. There are also LED indicators on the board that indicate the operating status of the relays.
1. GPIO 40-pin header | 5. Relay LED indicators |
2. Relay screw terminals | 6. Power supply indicator |
3. Relay components | 7. Relay control pin selection jumpers |
4. Optocouplers |
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU chip and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has a DDR4 4GB RAM memory. NVIDIA Jetson Nano Development Kit rev. B01 945-13450-0000-100
No product available!
Starter Cable Kit for Elroy Carrier. Connect Tech CKG059
No product available!
A set with four OV9281 cameras with a resolution of 1MP and an expansion module for Raspberry Pi, Jetson Nano and Xavier NX, which allows you to simultaneously connect four cameras to the minicomputer. ArduCAM B0267
No product available!
Base plate for NVIDIA Jetson TX2 / TX2i and Jetson TX1 modules. Equipped with 2 Gigabit Ethernet, HDMI, USB 3.0, USB 2.0, USB CLIENT ports, as well as miniPCIe extension, mSATA and optional GPS / GNSS module. Connect Tech ASG006 / ASG009
No product available!
IPS 4" LCD display with touch screen. Equipped with HDMI interface for image display and USB type C and I2C for touch screen. Resolution 720x720 pixels. Waveshare 4inch HDMI LCD (C)
Base board for NVIDIA Jetson AGX Xavier modules. Equipped with MIPI CSI-2, NVMe M.2 Key M, HDMI, USB 3.1, Ethernet (RJ-45), CAN Bus and power connector. Connect Tech AGX101
No product available!
A set of accessories for building an autonomous racing robot based on the popular NVIDIA Jetson Nano development kit. Waveshare JetRacer AI Kit Acce
Mini base board dedicated to NVIDIA Jetson Nano modules. It offers basic connectors, including M.2 Key B, 40-pin GPIO, Ethernet, USB, CSI and HDMI output. It has compact dimensions, making it ideal for projects with limited space. Waveshare JETSON NANO MINI (EU)
An expansion module for NVIDIA Jetson Nano development kits. It is equipped with a number of environmental sensors. Waveshare Environment Sensor for Jetson Nano
Camera for Raspberry Pi Compute Module and NVIDIA Jetson Nano. It was equipped with a Sony IMX477 sensor with a resolution of 12.3 MPx and a built-in IR filter. Waveshare IMX477-160 12.3MP Camera
Module with IMX298 sensor working with NVIDIA Jetson Nano. The sensor used has a 16 MP matrix and allows you to record video at resolutions of 16MP/30fps. Acrylic case included. ArduCAM B0214
The kit includes a module with two cameras with an IMX219 sensor with a resolution of 8 MP and an expansion module for NVIDIA Jetson Nano. ArduCAM B0217J8
Metal housing with a camera holder and a hole for a fan. Designed for the NVIDIA Jetson Orin Nano or Jetson Orin NX development kit. Waveshare JETSON-ORIN-CASE-A
1 MPx camera module with OV9281 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount, it is characterized by good sensitivity. ArduCAM B0223
5" LCD TFT display with touch screen. The display is equipped with HDMI and VGA interface for image display and USB for touch screen. Resolution 800x480 pixels. Waveshare 5inch HDMI LCD (H)
Case made of transparent plastic designed for Nvidia Jetson Nano. It protects the minicomputer against dust and mechanical damage. Waveshare Jetson Nano Case (A)
The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano