New products
New products
zł609.00
Delivery date unknown
zł462.10
24h
Available
Seeed studio LoRa / GPS HAT - extension for Raspberry Pi
ID: 565703
zł184.73
Tax included
zł150.19 tax excl.
Seeed studio LoRa / GPS HAT is an extension designed for Raspberry Pi 2 minicomputers (model B) and Raspberry Pi 3. It has a LoRa communication module (868 MHz) and a GPS module. Seeed Studio 113990254
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Seeed studio LoRa / GPS HAT is an extension designed for Raspberry Pi 2 (model B) and Raspberry Pi 3 minicomputers. It has a LoRa communication module (868 MHz) and a GPS module. In addition to the HAT Raspberry Pi LoRa / GPS HAT cover itself, there are also mounting elements (nuts, screws, distances) and an antenna for the communication module (868 MHz).
properties
- Compatible with Raspberry Pi 2 Model B and Raspberry Pi 3
- LoRa module:
- Frequency: 868 MHz
- Programmable Baudrate up to 300 kbps
- Maximum sensitivity: -148 dBm
- Power consumption: approximately 10.3 mA
- Full integration of the 61 Hz synthesizer
- Modulations: FSK, GHSK, MSK, GMSK, OOK
- Preamble detection
- Dynamic RSSI range: 127 dB
- Built-in temperature sensor and low battery indicator
- GPS module:
- Power consumption: 20 ... 25 mA
- Compatible with GPS and SBAS systems
- Programmable Baudrate up to 300 kbps
- UART transmission speed: 4800-115 200 bps (default: 9600 bps)
- Refresh rate: 1-10 Hz (default 1 Hz)
- Protocol: NMEA 0183, PMTK
- Localization accuracy: <2.5 m
- Support for EASY technology (based on AGPS without external memory)
- Sensitivity: -148 dBm
- Dimensions: 60 x 53 x 25 mm
- Weight: 30 g
Included
- 1 x Raspberry Pi LoRa / GPS HAT extension
- 4 x Distances
- 4 x Screws (M2.5 x 5)
- 4 x Nuts (M2.5)
- 1 x Antenna (868 MHz)
565703
Data sheet
- Compatible with
- Raspberry Pi 3/2/B+
You might also like
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
Regular pricezł197.00zł175.89
Delivery date unknown
No product available!
Small GPS location module with L80-39 GPS chip, USB and TTL two ports,easy to be used with Raspberry Pi, Arduino, STM32 and other kind of micrcontrollers. The GPS module uses NMEA0183 communication protocol, integrated ultra-small SMA antenna connector. DFRobot TEL0119
zł201.61
Delivery date unknown
No product available!
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł168.90
24h
Available quantity: 41
Available
Other products in the same category (16)
4-port HUB module with USB 2.0 interface designed to work with the Raspberry Pi minicomputer. Waveshare USB HUB HAT (B)
zł30.31
24h
Available quantity: 10
Available
The set with the RM502Q-AE module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM502Q-AE 5G HAT (EU)
zł2,086.85
4 weeks
No product available!
KAmod RPi5 M.2 mini allows you to connect NVMe M.2 drives, which allows you to use it as a multimedia center or file server, while maintaining a small size and low power consumption
zł35.90
24h
Available quantity: 67
Available
SIMCom 4G SIM7600G-H module kit designed to work with Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H 4G HAT (B)
zł348.52
4 weeks
No product available!
Radio module with RFM69HCW 433 MHz chip, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4073
zł144.14
24h
Available quantity: 2
Available
Adapter in the form of a HAT+ cover for Raspberry Pi 5 enabling the connection of drives, AI accelerators and other modules in the M.2 standard with an M key. The board supports drives in the 2230 and 2242 format and provides transfer speeds of up to 500 MB/s. Raspberry Pi SC1166
zł58.90
24h
Available quantity: 248
Available
Module with RS232 and RS485 interface dedicated to Raspberry Pi minicomputer. Communication takes place via the SPI interface. Waveshare RS485 RS232 HAT
zł84.85
24h
Available quantity: 6
Available
HAT module designed for Raspberry Pi minicomputer. Powala adds two RS485 interfaces and one CAN bus to the project. Waveshare RS485 CAN HAT (B)
zł107.51
24h
Available quantity: 6
Available
The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (with case) (EU)
zł1,861.14
4 weeks
No product available!
The EM060K-GL LTE Cat-6 module kit is designed for use with the Raspberry Pi minicomputer. It supports communication over the high-speed LTE-A network and GNSS positioning. Waveshare EM060K-GL LTE Cat-6 HAT
zł503.40
24h
Available quantity: 3
Available
Versatile CAN bus interface based on the MCP2518FD controller, enabling communication in CAN 2.0 and CAN FD modes via SPI interface, compatible with SBC computers, including Raspberry Pi 5, with additional security and the ability to support two modules simultaneously
zł69.77
24h
Available quantity: 162
Available
Expansion board with LoRa E22-900T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. SB Components 22571
zł159.90
24h
Available quantity: 3
Available
BTT U2C V2.1 is a versatile CAN Bus adapter, ideal for integration with Raspberry Pi. With ESD protection, a durable PCB surface, and support for firmware updates, it is a reliable solution for stable communication in 3D printing projects. BIGTREETECH U2C V2.1
zł62.55
24h
Available quantity: 16
Available
A 3-port HUB module with a USB 2.0 interface with an RJ45 connector, designed to work with the Raspberry Pi minicomputer. Waveshare ETH/USB HUB HAT (B)
zł50.81
24h
Available quantity: 16
Available
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)
zł1,672.58
4 weeks
No product available!
3-port HUB module with USB 2.0 interface with RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Case included. Waveshare PoE-ETH-USB-HUB-BOX
zł123.90
24h
Available quantity: 2
Available
Seeed studio LoRa / GPS HAT is an extension designed for Raspberry Pi 2 minicomputers (model B) and Raspberry Pi 3. It has a LoRa communication module (868 MHz) and a GPS module. Seeed Studio 113990254