- New
DS1100 - programmable RS232 controller
ID: 1191482
5906623487271
zł520.33
Tax included
zł423.03 tax excl.
The DS1100 is a programmable RS232 controller with Ethernet, ideal for serial-over-IP applications, featuring three LEDs, PoE capability, and a comprehensive set of mounting accessories. Tibbo Technology DS1100
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The DS1100 is a compact, programmable Tibbo BASIC/C controller with Ethernet connectivity. It is designed for serial-over-IP and serial control applications, making it ideal for budget-conscious projects. Equipped with a single-channel RS232 port, the device can be powered via its power jack, pin 9 of the DB9 connector, or through the power-over-Ethernet (PoE) option. The front panel features three LEDs: green and red for status indication and yellow for Ethernet connection. Each DS1100 is supplied with DIN rail and wall mounting plates.
Features
- 10/100Base-T, auto-MDIX Ethernet port
- Single-channel RS232 port on a DB9M connector
- TX, RX, RTS, CTS, DTR, and DSR lines
- Baud rates up to 115,200bps
- Parity modes: none/even/odd/mark/space
- 7 or 8 bits per character
- RTS/CTS and XON/XOFF flow control
- 17.5KB SRAM for Tibbo BASIC/C variables and data
- 512KB flash for firmware and application storage
- 208-byte EEPROM for data storage
- Three LEDs: green and red for status, yellow for Ethernet
- Power: 12VDC (9 ~ 18V), optional PoE
- Dimensions (LxWxH): 90 x 48 x 25mm
- Operating temperature range: -5 ~ +70°C
- Firmware is upgradeable through the serial port or network
- Tibbo BASIC/C applications can be debugged via Ethernet LAN
- CE and FCC certified
Included
- Controller RS232
- DIN rail mounting plate
- Wall mounting plate with screws
1191482
Other products in the same category (16)
RS232 - UART converter module based on the MAX3232 chip. There is a DB9 connector on the board and a 4-pin connector with a 2.54 mm pitch
zł4.50
24h
Available quantity: 7
Available
USB - RS232 adapter equipped with a USB type A connector and an RS232 connector in the DB9 female standard. It uses the original FTDI FT232RL chip, which guarantees a reliable connection between a variety of devices. Waveshare USB-TO-RS232-Female-Cable
zł49.53
24h
Available quantity: 2
Available
UART-RS232 converter module. The board was equipped with a Grove and DB9 connector. Seeed Studio 103020192
zł41.59
24h
Available quantity: 2
Available
The converter enables simple connection of the project being built with the UART output to the computer via a USB interface. After connecting to a computer, a virtual COM port is created. MOD-05 / AZ
zł46.64
24h
Available quantity: 1
Available
USB-UART TTL converter based on the CH343G chip. Equipped with a number of security features ensuring stable and safe communication. Waveshare CH343 USB UART Board (type A)
zł16.52
24h
Available quantity: 3
Available
USB-UART converter for Odroid minicomputers. It is based on the CP2102N chip and is equipped with a USB type C connector
zł78.61
24h
Available quantity: 11
Available
KAmod RS232S-ALL is a 3-5.5V RS232 to TTL converter supporting all RS232 signals, offering standard DB9 and Phoenix MC 3.81 connectors and 2.54mm goldpins, based on the MAX3238/SP3238 and providing ESD protection up to 15kV
zł44.14
24h
Available quantity: 199
Available
USB - UART converter based on the PL2303GS chip. Compatible with 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a micro USB connector. Waveshare PL2303 USB UART Board (micro) V2
zł15.69
24h
Available quantity: 6
Available
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. DEV-09716
zł76.01
24h
Available quantity: 1
Available
USB-UART converter with four isolated UART ports with built-in isolation of 1.5kV/3kV. It guarantees data transmission speeds of up to 12 Mbps and the ability to work with 1.8 V or 3.3 V voltage systems on the UART side. It is equipped with a USB Type C connector and is capable of operating in a wide temperature range from -40°C to +55°C. Electronic Prototypes EPED001A-10-STD
zł669.02
24h
Available quantity: 1
Available
WIFI-LPT100 Eval Kit module enables UART data transmission via WiFi, ultra low power consumption, encrypted communication
zł110.76
4 weeks
No product available!
USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, it is equipped with a microUSB connector. Cytron UC00A
zł43.54
6 weeks
No product available!
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets. Adafruit 954
zł58.65
24h
Available quantity: 2
Available
The base plate is dedicated to ESP32 CAM modules. It allows you to connect the camera via a USB interface, e.g. to a computer. ESP32-CAM-MB
zł12.15
24h
Available quantity: 59
Available
The module with the converter USB-UART CP2104 dedicated for minicomputers Raspberry Pi. Adafruit 3589
zł39.53
24h
Available quantity: 3
Available
Overlay module for Raspberry Pi with GSM, GPRS, GNSS and Bluetooth
zł125.87
24h
Available quantity: 4
Available
The DS1100 is a programmable RS232 controller with Ethernet, ideal for serial-over-IP applications, featuring three LEDs, PoE capability, and a comprehensive set of mounting accessories. Tibbo Technology DS1100