USB - RS232/RS485 converter with FT232RL chip

ZL5USB is a USB-UART converter module based on Silabs CP2102. The module has small sizes, microUSB connector and it can works with the 2.5...5.5V signals.

USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, has been equipped with a USB type C connector. Waveshare FT232 USB UART Board (Type C)

The DS1100 is a programmable RS232 controller with Ethernet, ideal for serial-over-IP applications, featuring three LEDs, PoE capability, and a comprehensive set of mounting accessories. Tibbo Technology DS1100

The FT232RNL USB to UART converter provides stable serial communication and debugging of industrial equipment, supporting 3.3V and 5V voltages and hardware flow control. With power indicators, protection diodes, and compatibility with multiple operating systems, it offers reliable data transfers from 300 bps to 3 Mbps, as well as additional protections against faults and electrostatic discharge. Waveshare USB TO TTL (C)

USB - UART converter based on the PL2303GS chip. Compatible with 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a micro USB connector. Waveshare PL2303 USB UART Board (micro) V2

CP2102 USB to UART Module, USB micro connector

USB - RS-232 USB A (m) / D-Sub (m) cable with a length of 1 m. Akyga AK-CO-02

RS232 - UART converter module based on the MAX3232 chip. There is a DB9 connector on the board and a 4-pin connector with a 2.54 mm pitch

Overlay module for Raspberry Pi with GSM, GPRS, GNSS and Bluetooth

Isolated USB converter - RS232/485/TTL for industrial applications. It provides easy communication between the USB interface and the RS232, RS485 and TTL standards. Waveshare USB TO RS232/485/TTL

The UART-USB converter built on the FTDI FT232RL chip. Compatible with 3.3V and 5V voltages. DFRobot DFR0065

USB-UART TTL converter based on the CH343G chip. Equipped with a number of security features ensuring stable and safe communication. Waveshare CH343 USB UART Board (mini)

USB - RS485/RS422/RS232 converter designed to convert USB signal to serial signal. It is used to connect devices with USB interface to RS485, RS422 or RS232 network. It uses ADI (Analog Devices iCoupler) galvanic isolation technology. EVC8013B

Isolated USB - RS232/RS485/RS422/TTL converter dedicated to industrial applications. It offers 4 channels for serial communication, including TTL channel, TTL/RS485, isolated RS485/422 channel and isolated RS232/485 channel. Provides easy communication between the USB interface and serial communication standards. Waveshare USB TO 4CH Serial Converter