EVC9001B - USB galvanic isolator

LCD 2x16, 85x36mm, LED backlight (WHITE) FSTN, cyryllic, ECO, enhanced temperature range, fast, 1-LED

Module with 25 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4425

Step-Down XL4015 converter module with adjustable output voltage in the range from 1.25 to 36 V with a wide input voltage range from 4 to 38 V and a maximum output current of 5 A

Module with an analog TEMT6000 light intensity sensor. The voltage at the output is linearly correlated with the intensity of the incident light. The module is supplied with the voltage from 3.3 to 5V. DFRobot SEN0043

4-channel RS485 to Ethernet converter designed for industrial environments. Connects serial server, Modbus gateway, MQTT gateway, RS485 to JSON. It has four RS485 ports and one Ethernet port. Waveshare 4-CH RS485 TO ETH (B)

The module is equipped with an RGB 65K display with a resolution of 160x80 pixels and a diagonal of 0.96 inches, which is controlled directly by the PIXXI-28 graphics processor from 4D Labs. It has pins compatible with the prototype board and has been designed to work with development modules equipped with a mikroBUS™ Click socket. SparkFun LCD-19253

Transparent prototype contact board with 400 points, dimensions 82x55x10 mm, with double-sided adhesive tape. PPS0400T

4-pin cable with JST SH connector compliant with STEMMA QT/Qwiic. Ended with alligator clips. Adafruit 4398

Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and Raspberry Pi Compute Module. It is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 200°. Waveshare IMX219-200 Camera

The OAK-D Lite Bumper Case is designed to protect your OAK-D Lite during use

Module with a 1.28" round colour IPS LCD display with a resolution of 240x240 pixels. Equipped with a touch panel. Communication is via SPI (display operation) and I2C (touch panel) interfaces. Waveshare 1.28inch Touch LCD

Shielded FTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCF6-10CC-0050-R

Dual DC motor controller designed for Arduino, which enables the motor to be supplied with voltage in the 4.5 ... 28V range and power consumption in continuous operation of 2.6 A (5A at the top) of two DC motors. Polol 2520