![EVC9001B - USB galvanic isolator EVC9001B - USB galvanic isolator](https://kamami.pl/36902-large_default/evc9001b-usb-galvanic-isolator.jpg)
![EVC9001B - USB galvanic isolator EVC9001B - USB galvanic isolator](https://kamami.pl/36902-large_default/evc9001b-usb-galvanic-isolator.jpg)
zł181.27 tax excl.
USB port isolator with magnetic isolation. The device has a rated insulation voltage of 3000 V. The isolator can be powered from the USB port, it is possible to connect an external power supply. EVC9001B
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Magnetically isolated USB port isolator using ADI magnetic coupling isolation technology. The device has a rated insulation voltage of 3000 V. The isolator can be powered from the USB port with an output capacity of up to 180 mA. It is possible to connect an external power supply in order to increase the output current efficiency. Supports Low-Speed and Full-Speed USB speeds.
It has short-circuit protection and ESD protection. Works with Windows, Linux and MAC OS. The set includes a 1 A power supply.
Isolated USB-RS485/422 converter with magnetic isolation ADI. It has galvanic isolation up to 1500 Vrms. Communicates with the computer via a USB interface, compatible with all versions of Windows. Gingko EVC8004
3-port USB hub with magnetic isolation. The rated voltage of the insulation is 2500 V. The hub is a passive device powered from the USB port. EVC9003
STEMMA QT/Qwiic cable (adapter) for Grove 100 mm long. It enables interoperability between the I2C SparkFun Qwiic and Adafruit STEMMA QT-based system and Seeed Studio\'s Grove boards. Adafruit 4528
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1
E-Paper display with a diagonal of 2.13" and a resolution of 250x122 px with passive power supply via NFC. Waveshare 2.13inch NFC-Powered e-Paper
LPC55S66JEV98K, ARM Cortex-M33 Microcontroller, 32 bit, 150 MHz, 256 KB Flash, VFBGA98
Akyga AK-OT-05A is a 1.5-meter power cable prepared for quick replacement with Europlug CEE 7/16. Thanks to the special solder, installation is easy, which allows you to quickly replace a damaged cable in everyday devices. Akyga AK-OT-05A
2-wire cable, 10 cm long, with a micro 5264 female plug at both ends
LED 3 mm IR 940 [nm], angle 25 degrees; power max 100 mW typ. (50mA) (1.5V), RoHS
No product available!
5-wire cable, 10 cm long, with a micro 5264 female plug at one end
Module with 2-channel DC motor driver DRV8833 designed to work with the Raspberry Pi Pico. It can work with a voltage from 2.7 to 10.8 V and a current of up to 1.2 A. Pimoroni PIM617
Adapter 90 ° Akyga AK-AD-01 HDMI (m) / HDMI (f) right angle
Biaxial gyroscope for image stablilizing applications; LGA-12; STMicroelectronics; Compliance
Shield for STM32 Nucleo that allows you to add the possibility of operating a three-phase brushless motor (BLDC) or synchronous permanent magnet (PMSM). It uses the L6230 chip for control. X-NUCLEO-IHM07M1
FFC/FPC flex cable 40pin, 0.5 pitch, 10cm, A-A
Adapter with two DIP8 sockets and one DIP8 male connector
USB port isolator with magnetic isolation. The device has a rated insulation voltage of 3000 V. The isolator can be powered from the USB port, it is possible to connect an external power supply. EVC9001B